Fixed focus lenscanon

Sorry if this is vague. I'm just struggling to wrap my mind around the technical details of what happens when you alter a lens's focus. What variable is changing?

Aperture determines the DOFocus at the image plane. A smaller aperture has a narrower DOFocus, which means more of the scene is in-focus at the image plane rather than more of the scene being in-focus behind, or in-focus in front of the image plane (recording as out of focus).

Fixedfocal lengthlensvs zoom

Whenever you focus on an object some of the rest of the scene is also in focus. The amount of the scene that is in focus is referred to as the depth of field.

DOField is a perceptual quality... basically, the larger a point appears to you the less sharp/acceptably sharp it will seem to be.

Fixed focusDigital Camera

When you focus a lens you are moving the DOFocus in relation to the image plane. This can be done externally with a bellows by moving the lens forward/backwards, to move the DOFocus forward/backwards on the image plane; or by moving the image plane/body forwards/backwards w/in the DOFocus. With an internal focus lens, focusing elements move in order to move the DOFocus in relation to the image plane. You can also move the camera and lens together w/o focusing in order to move the DOFocus w/in the scene (i.e. a macro focusing rail).

Fixed focusbinoculars

Think about a tiny portion of a vista, maybe the gleam in a pretty girl’s eye. If this object is a far distance, the light from this tiny object arrives at the lens as parallel rays. The shape of the glass lenses and their density alters the path of this incoming light. It departs the lens as converting rays. A trace of these rays resembles a cone of light. The apex of this cone will form 50mm downstream from the lens (provided the source was at a far distance away (infinity ∞) and the lens has a 50mm focal lenght. Since this 50mm fixed lens has limited ability to alter the angle the rays exit, should the object be closer than ∞, the apex of the cone will form further downstream. When you focus by turning the focus ring on the lens barrel, you are adjusting the distance lens to image sensor / film in an attempt to kiss off the apex of the cone of image forming light on film or sensor.

If I'm playing with a 50mm fixed lens, and I alter its focus using the little ring around the lens, what is actually changing in terms of depth of field? I'm trying to understand DoF a bit more. From my understanding, it's a calculation of aperature, focal length, and focal distance. By changing the focus manually, what's changing? Is it the focal length?

Briefly, all objects in a vista can be consider to consists of countless tiny points. Each will be the origin of light rays. If the object is distance, these rays enter the lens parallel rays. If the object is close to the camera, the rays striking the lens are not parallel, they are diverging. The lens redirects all these rays. There new path is a cone of light. The apex of the cone of light from each object has a finite length. The shortest distance lens-to-apex is a trace of a distant object. Objects that are close have longer lens-to-apex distances. When you turn the ring, you are adjusting the distance lens-to-image sensor. An object is in focus only when the apex of the cone of the image forming rays kiss the image sensor. When this happens, the object is imaged as a super tiny circle of light. This tiny circle has indistinct margins; we call them circles of confusion. The entire image of a vista consists of countless such circles. Objects in focus reproduce as super tiny circles. Objects out-of-focus reproduces as larger circles. To appear sharp, the circles of confusion must be super tiny, so tiny they are perceived at points of light and not circles of light.

Fixed focuscamera advantages and disadvantages

Depth-of-field is that zone before and behind the distance actually focused upon, in which objects appear to be reasonably in sharp focus. This zone contracts and expands based on the diameter of the camera’s aperture setting. Tiny diameters of aperture expand the zone. Depth-of-field has many elements, aperture, subject distance, acuity of the observer’s eye, lighting level of the image being viewed, contrast of the image being viewed, and the distance of the observer to the image being viewed. The complexity of depth-of-field is too great for these few paragraphs. Why not study up on the subject. In a nutshell, if the circles of confusion are seen as points of light, the image will be declared tack sharp. If the circles are visible to the observer as circles and dimensionless points, the observer will declare the image to be fuzzy.

The focusing model then has rays spreading out from each sensor point to all points on the ideal lens that are reachable through the aperture (which is idealised into the same plane as the ideal lens) and from this sort-of circle shape a cone of viewing rays converges to the corresponding point in the focused plane. "Viewing rays" can be cut short by something before the focusing plane or, if they can continue onward to some background point. So basically you have these cones from the lens/aperture converging to points in the focusing plane and spreading out afterwards again.

Bestfixed focus lens

Lens magnification (focal length) determines how large a point will be when it reaches the sensor. Subject distance determines how large that point is initially (i.e. larger if closer), and therefore affects the magnified result. It is not focus distance per-se, but if the subject is in-focus they are effectively the same thing. And display magnification (size/viewing distance) affects the relative size/magnification by which you judge sharpness/acceptable sharpness.

The closer your focus plane, the more rapid the cones converge and spread out again. And obviously a larger aperture also makes them wider.

Most depth-of-field tables are based on a circle size of 1/1000 of the focal length. Thus for a 50mm lens, that's 0.05mm. Such a value assumes an 8x10 inch print or image will be made. For 35mm film that requires about 8X magnification. For critical work Kodak used 1/1750 thus 0.028mm.

Fixed focusvs autofocuswebcam

Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

The sun is effectively infinitely far away. A simple 50mm lens would be 50mm from the sensor when focussed on the sun (not normally true for camera lenses due to complex lens design).

Fixed focus lensnikon

Depth of field depends on one thing only - the size of the aperture as seen by the subject. As this gets bigger the depth of field gets shallower.

A simple experiment could make this easier to understand: Take an image of marginal sharpness and view it small on your computer... it will seem sharper. Then increase its' size until the lack of sharpness becomes apparent... it is now "less acceptably sharp." Now move some distance away from your computer and the image will again appear sharper. That is DOField in action... and the same applies to the image as recorded on the sensor (relative size/magnification and DOFocus) because that affects the initial source you're viewing.

The variable changing as you change focus is the position of the idealised lens before your plate/film/sensor plane. Early cameras had a bellows to accommodate moving the lens. Large frame cameras still have them because there are reasons to not just move the lens but also shift it (for avoiding "tumbling lines" without having to place the horizon in the middle of the image) and tilt it (to get an oblique focus plane rather than one parallel to the image). But the normal focusing change is just varying the distance of the lens to the imaging plane.

When you bring the lens closer to the subject the physical aperture appears bigger, reducing the DOF. If you use a longer focal length lens at the same distance the physical aperture is bigger for a given f stop, so the DOF is again reduced.

With a simple lens, when you turn the focus ring you are moving the whole lens closer or further away from the sensor. Much like you would focus the sun to a spot of light using a magnifying glass.

Lenses these days are complex contraptions but the principal lens model they try to approximate is a single ideal convex lens of the given focal length. When you are changing focus, you are changing the distance of that lens to your imaging plane.