A sign in a blue circle in fire safety indicates a mandatory action, such as wearing protective gear or following specific procedures.

These signs are usually rectangular and come in with the description of the type of fire extinguisher in a red background and the description of the type of the fire it can be used for on a green background.

The end signimages

Under the Regulatory Reform (Fire Safety) Order 2005, all occupants of a building must be well aware of all the fire safety instructions. The fire action notices or charts should be in strategic locations around the building such as, near the alarm point, fire equipment point and fire exit corridors. Fire action signs also describe what action should be taken in the event of discovering a fire or upon hearing the alarm. In case you need to know where the nearest fire exit or meeting point is or if you need to phone anyone, that should also be included on the fire action signs.

We are competitive as a business and government contractor. Our goal is to guide each customer toward the best solutions and set up temporary traffic operations, including the above sign selections, as well as permanent applications that conform with regulations. Our staff is dedicated to promoting and improving highway safety for the benefit of construction workers and the traveling public. Lastly, Worksafe is committed to working directly with private, public, federal, and legislative groups to promote the high benefits of saving lives on our highways by investing in low-cost safety solutions.

Whereas the Regulatory Reform (Fire Safety) Order 2005 require stringent stipulations on the maintenance and usage of the fire safety signs. The law also states that all the residents of a facility must be informed of the fire safety instructions and fire safety signs.

In cases like power failures or blackouts, acoustic signals and illuminated signs work better than the conventional signboards. But there are some minimum requirements to use these.

End signsymbol

Based on the criteria mentioned above, fire safety signs are designed to provide health and safety information to anyone leaving or entering a building during a fire emergency.

Mandatory signs are usually illustrated on a blue background with white symbols or pictogram, and the signboards are usually round. These signs are intended to help prevent the spread of fire and give clear instruction to the occupants of the building about fire safety.

There are different types of fire safety signage required by the two main pieces of fire safety legislation governing fire safety signs.

Allow us to break down the meaning of the following sign, one of which is extremely important for the construction workers who would be on-site doing the workday and night, pedestrians, and motorists traveling by.

Under Standard BS 5499, safe condition signs are usually illustrated with white safety symbols on a green background usually providing information about the location of the first aid equipment and instructions for people with special needs or disabled persons.

This blog will give you all the important insights on fire safety signs, what they are, what they mean and how to follow them.

A blue fire safety sign with white text indicates mandatory actions or instructions that must be followed, such as the need to wear specific protective equipment.

There may be specific doors installed in your facility only for the fire emergency escapes. If the doors feature some sort of security devices such as a sliding mechanism or release to open mechanisms, there must be opening instructions on the safety signs.

With a team of industry professionals producing and delivering our course content, you can be sure the skills and knowledge you learn are applicable to your career aspirations, whether that’s in management, administration or beyond.

Green and white safety signs indicate safety equipment or first aid stations. They guide you to safety-related areas and resources.

Whether you live in a residential area or work in an office or industry, your facility needs at least 2 or 3 fire safety signs to ensure everyone’s safe evacuation.

Imagine a typical day, you’re working in an office and suddenly hear a loud warning sound through the alarm system. What would you do instantly? If it’s a fire emergency, can you deem yourself knowledgeable with the fire safety signs on the building or should you panic not knowing the fire safety signs thoroughly?

Prohibition signs are permanent signboards intended to prohibit specific actions which may pose a fire risk or hazard. Even after a fire risk has been identified, prohibition signs can be used to inform people within the building about the mandatory instructions. These instructions must be followed at all times to control the risk.

EndWork ZoneSign

Installing fire fighting signs near the fire fighting equipment is mandatory. These signs provide the following information:

One of the most commonly used traffic control devices is signs. They are orange in color and are typically diamond-shaped, but some road work signs may be rectangular as well. All road work signs are very easily noticeable because they are usually reflectorized to attract your attention, especially at night time. This is a similar idea to the special safety vests that the construction workers wear on the job site so you can easily notice them too.

The endpictures for presentation

Did you know that according to the latest statistics from the Occupational Safety and Health Administration (OSHA), there are at least two deaths on a construction job site every day across the country? Construction zones can be very dangerous with many potential hazards if precautions are not taken seriously and by each party. It is of utmost importance to pay attention, always be alert and follow signs to not only ensure your safety, but everyone else’s around, including construction workers on the job site. This is the main reason why we create such signs for use.

Hand signals are very convenient in situations like signalling to stop any procedures or to guide people carrying out hazardous materials etc. These signals are also precise, easy to understand and clearly distinct from other signals. Basic hand signals are in coded form.

According to the fire safety order 2005, all the responsible person for the building must perform a significant number of responsibilities whether it’s a workplace or, aircraft, ships, offshore rigs or anything apart from domestic premises. It’s the duty of the fire warden or fire marshal to ensure that the facility’s fire safety arrangements are appropriate or not. Effective planning, organising, scheduled monitoring and review of the preventive and protective measures are prerequisites for a fire-safe environment.

We offer the full package and are with you from the design phase to implementation, deployment, and maintenance! We also offer equipment repair if needed. Worksafe Traffic Control Industries is proud of its large fleet of message signs, arrow boards, traffic signals, trailer mounted video camera, queue detection, speed signs, and microwave technologies we offer for rent. We like to consider ourselves a one-stop-shop for all your traffic control needs.

Fire exit and escape route signs precede over all other signs because these signs are the first that you have to notice and follow through. The fire exit signage identifies the directions of travel to escape or exit a building. This makes an evacuation procedure simple, quick and efficient.

In any industrial or commercial facility, usage of more than one type of signals reduces the risks of fire hazards. For instance, an illuminated warning sign combined with an acoustic alarm and hand signals merged with a spoken message can provide clear instructions to all the people on the building.

The endimages

The prohibition signs are always red circles with a diagonal bar on a white background indicating a “do not” symbol with the prohibited action within it and written underneath it.

To assess the overall fire emergency evacuation procedures, verbal signals along with acoustic signs, can convey a clearer instruction. The spoken messages must be clear, short and concise enough so that the listener can easily understand. The message can be delivered either by human or artificial voice.

Apart from the primary fire safety signs designated by the Health and Safety legislation, there are few other fire safety signs that are and can be used in the building.

These traffic control signs are used to mark construction – in this case, where the road work ends. There would have been a “Road Work Ahead” sign at the start of the construction area. These signs help drivers and pedestrians as well as the workers safe throughout. It’s important to note that fines may double in work area zones. An “End Road Work” sign indicates that a driver or pedestrian is about to enter back into a normal zone and should follow any regular signs ahead moving forward.

Although we see the fire safety signs every day, it’s important to pay more attention to them. If you are an employer, you should ensure that all the people working in the building know and understand the rules and regulations related to fire safety signs. Keeping safe in a fire emergency is imperative, and a better understanding of fire safety signs ensure it.

Worksafe Traffic Control Industries has been providing safe and smart solutions throughout New England for over a decade. We offer a variety of rental options. Give our experts a call today for a consultation to discuss your project needs and overall goals. We’re happy to help!

DeadEnd sign

Worksafe Traffic Control Industries has been providing safe and smart solutions throughout New England for over a decade. We offer a variety of sales options. Give our experts a call today for a consultation to discuss your project needs and overall goals. We’re happy to help!

These signs are usually in blue and white, but some might be in red and white too because the fire action signs denote both the required actions and evacuation process.

The five types of fire safety signs are prohibition signs, which indicate actions that are not allowed; warning signs, which show potential hazards; mandatory signs, which require specific actions; emergency information signs, which provide essential details for emergencies; and fire equipment signs, which identify the location of fire-fighting equipment.

Worksafe Traffic Control Industries is a women-owned business that was founded in 1993 by Lorena Laprade and Debra Ricker. We began manufacturing temporary construction signs in a small shop garage. Throughout the years, we have made it our goal and full intention to provide products focused on safety and effectiveness while producing those products in accordance with the Manual on Uniform Traffic Control Devices (MUTC). All of the signs we produce are certified and are heavily sourced throughout the Northeastern United States, more specifically in Vermont, New Hampshire, Maine, and Massachusetts. Additionally, all of the signs are intended for roads and highways.

The fire safety signs are part of the planning of fire safety protective measures because the fire safety signs will instruct you what to do and what not to do during a fire emergency.

Steep hill aheadsign

Well, it’s a matter of life and death when you have to act calmly and smartly to save yourself from a fire hazard. But it requires proper knowledge of fire safety signs that you need to be well aware of in a real emergency.

According to the Fire Safety Order, all the occupants of a building must be well-informed about the presence of any hazardous material on and near the facility. In high-risk areas like industrial buildings dealing with flammable and explosive materials, hazard warnings are a must to warn people to take precautions.

The term ‘sign’ refers to a gesture, a symbol or word to represent an instruction, operation, or to convey information as a notice on public display. Whether the signs are acoustic, verbal, and hand signals or represented as symbols or pictogram, they are intended to be easily understood, independently of the language and literacy ability of anyone viewing it.

The fire safety signs are categorised into the following eight groups, according to the British and International standards.

In some facility, photoluminescent (matters that emit lights after absorbing photons) signs are used, which can be slightly more expensive but are more useful under power loss conditions.

The endis nearsign

Based on the layout of your premises, fire safety signs can vary. However, there are certain fire safety signs that you need to put in place in the building to ensure everyone’s safety.

If your facility has any disabled person, you should plan in advance what sort of assistance the impaired person needs. For example, you can arrange an evacuation chair adjacent to the “emergency chair” sign.

By providing such warnings and direction for motorists and pedestrians, traffic hassles such as accidents, collisions, slower driving times, etc. can be expected for what’s ahead including any restrictions. It’s also important to keep top-of-mind that if someone is injured in a construction zone, the person who caused it would become responsible for all injuries.

According to the health and safety legislation, all responsible persons must assess the manual operation of fire safety. This enfolds the instructions to use fire safety equipment by the occupants of the building, whether it’s a commercial or multi-residence environment.

These signboards or pictogram are generally triangular and yellow and are to be used when deemed necessary. For example:

Fire safety signs are also meant to help the occupants in a building make their way out of the facility or to find fire fighting equipment during a fire.

According to the Health and Safety (Safety Signs and Signals) Regulations 1996, all employers must provide specific safety signs on the facility, whether there is a fire risk or the risk is insignificant.

Fire extinguisher signs are meant to help everyone locate fire extinguishers in a building as soon as possible in the event of a fire. These signs are normally easy-to-read signs and crucial to avoid catastrophic damage and injuries.

Why choose us? Not only do we have a seven-day turnaround on most products, but we strive to provide the highest quality possible. As mentioned, all products are MUTCD-certified and compliant.

The two legislation also cover some major requirements related to the usage and maintenance of the fire safety signs. For example: