IC Imaging Control - Image Acquisition Software for Windows - ic control

 2024-10-12 11:16:16

Imagesensorsize

A more advanced use case could be to set the icon based on the sensor’s own state like above, but when triggered by an event. This example demonstrates a binary sensor that turns on momentarily, such as when a doorbell button is pressed.

Substrate: VUV CaF2, UV Fused Silica, or BK7Diameter Tolerance: +0.0/-0.20 mmThickness Tolerance: ±0.25 mmSurface Irregularity: λ/2 for Y-direction, λ/4 for X-direction @ 633 nmSurface Quality: 20-10 laser quality

In the below example, re-renders are limited to once per second because we iterate over all entities in a single domain (sensor):

If you need more specific features for your use case, the manual YAML-configuration section of this integration might provide them.

With a Template Sensor, it’s easy to convert given values into others if the unit of measurement doesn’t fit your needs. Because the sensors do math on the source sensor’s state and need to render to a numeric value, an availability template is used to suppress rendering of the state template if the source sensor does not have a valid numeric state.

Whenever the trigger fires, all related entities will re-render and it will have access to the trigger data in the templates.

This format is configured as a platform for the binary_sensor integration and not directly under the template integration.

The sensor is on if the template evaluates as True, yes, on, enable or a positive number. Any other value will render it as off. The actual appearance in the frontend (Open/Closed, Detected/Clear etc) depends on the sensor’s device_class value

An ID that uniquely identifies this entity. Will be combined with the unique ID of the configuration block if available. This allows changing the name, icon and entity_id from the web interface.

The amount of time the template state must be not met before this sensor will switch to off. This can also be a template.

State-based and trigger-based template entities have the special template variable this available in their templates and actions. The this variable is the state object of the entity and aids self-referencing of an entity’s state and attribute in templates and actions. Trigger-based entities also provide the trigger data.

For example, you can have a template that takes the averages of two sensors. Home Assistant will update your template sensor as soon as either source sensor updates.

A digital camera at its widest angle is said to have a 1x zoom. However, since the widest angle will vary with almost every camera, an absolute millimeter ...

The binary sensor turns on and sets the matching icon when the appropriate event is received. After 5 seconds, the binary sensor turns off automatically. To ensure the icon gets updated, there must be a trigger for when the state changes to off.

If you are using the state of a platform that might not be available during startup, the Template Sensor may get an unknown state. To avoid this, use the states() function in your template. For example, you should replace {{ states.sensor.moon.state }} with this equivalent that returns the state and never results in unknown: {{ states('sensor.moon') }} .

You can use a trigger-based template entity to convert any event or other automation trigger into a binary sensor. The below configuration will turn on a binary sensor for 5 seconds when the automation trigger triggers.

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

This example demonstrates the usage of a template number with a unit of measurement set to change a unit-less value of another number entity.

Sets the class of the device, changing the device state and icon that is displayed on the UI (see below). It does not set the unit_of_measurement.

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

This example shows how to store the last valid value of a temperature sensor. It will update as long as the source sensor has a valid (numeric) state. Otherwise, the template sensor’s state will remain unchanged.

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

If you want more control over when an entity updates, you can define a trigger. Triggers follow the same format and work exactly the same as triggers in automations. This feature is a great way to create entities based on webhook data (example), or update entities based on a schedule.

The same would apply to the is_state() function. You should replace {{ states.switch.source.state == 'on' }} with this equivalent that returns true/false and never gives an unknown result:

1/1.3 inchsensorsize

Defines the units of measurement of the sensor, if any. This will also display the value based on the user profile Number Format setting and influence the graphical presentation in the history visualization as a continuous value.

Sensors, binary (on/off) sensors, buttons, images, numbers, and selects are covered on this page. They can be configured using UI or YAML file.

To be able to add Helpers via the user interface, you should have default_config: in your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more]. It should already be there by default unless you removed it.

This example creates a washing machine “load running” sensor by monitoring an energy meter connected to the washer. During the washer’s operation, the energy meter will fluctuate wildly, hitting zero frequently even before the load is finished. By utilizing delay_off, we can have this sensor only turn off if there has been no washer activity for 5 minutes.

Opticalformat

This example is determining if anyone is home based on the combination of device tracking and motion sensors. It’s extremely useful if you have kids/baby sitter/grand parents who might still be in your house that aren’t represented by a trackable device in Home Assistant. This is providing a composite of Wi-Fi based device tracking and Z-Wave multisensor presence sensors.

Light up stage NF660 laser lights DMX mode: pattern selections, laser ... laser lights) project the same patterns as the master laser lights projector.

The amount of time the template state must be not met before this sensor will switch to off. This can also be a template.

Defines a template that describes when the state of the sensor was last reset. Must render to a valid datetime. Only available when state_class is set to total

Enable or disable SSL certificate verification. Set to false to use an http-only URL, or you have a self-signed SSL certificate and haven’t installed the CA certificate to enable verification.

Buy Lepro AI generated lighting LED lights, like RGB LED Wall Lights, Neon RGB Rope Lights, AI Light Bulbs, AI Smart LED Strip Lights, ...

Define conditions that have to be met after a trigger fires and before any actions are executed or sensor updates are performed. Optional. See condition documentation.

Sony IMXsensorlist

The state, including attributes, of trigger-based sensors and binary sensors is restored when Home Assistant is restarted. The state of other trigger-based template entities is not restored.

They are optically flat and transparent. These optical windows perform well in military, aerospace, and commercial avionics, medical instrumentation to science, ...

Defines a template to get the available state of the entity. If the template either fails to render or returns True, "1", "true", "yes", "on", "enable", or a non-zero number, the entity will be available. If the template returns any other value, the entity will be unavailable. If not configured, the entity will always be available. Note that the string comparison is not case sensitive; "TrUe" and "yEs" are allowed.

From handmade lamps and chandeliers, to hurricane pillar candle holders in all sizes to tiny tealights – find a design that really lights you up.

The above configuration variables describe a configuration section. The template integration allows defining multiple sections.

This example demonstrates how to use template to change the icon as its state changes. This icon is referencing its own state.

Camerasensor

The state_class of the sensor. This will also display the value based on the user profile Number Format setting and influence the graphical presentation in the history visualization as a continuous value. If you desire to include the sensor in long-term statistics, include this key and assign it the appropriate value

Trigger-based entities do not automatically update when states referenced in the templates change. This functionality can be added back by defining a state trigger for each entity that you want to trigger updates.

When states is used in a template by itself to iterate all states on the system, the template is re-rendered each time any state changed event happens if any part of the state is accessed. When merely counting states, the template is only re-rendered when a state is added or removed from the system. On busy systems with many entities or hundreds of thousands state changed events per day, templates may re-render more than desirable.

1inchsensor

Defines a template to get the state of the sensor. If the sensor is numeric, i.e. it has a state_class or a unit_of_measurement, the state template must render to a number or to none. The state template must not render to a string, including unknown or unavailable. An availability template may be defined to suppress rendering of the state template.

Defines a template to get the available state of the integration. If the template returns true, the device is available. If the template returns any other value, the device will be unavailable. If availability_template is not configured, the integration will always be available.

The amount of time (e.g. 0:00:05) the template state must be met before this sensor will switch to on. This can also be a template.

2023411 — SWIR cameras are an invaluable imaging tool for various industries due to their unique capabilities. From identifying crop health to seeing through smoke in ...

smart vision lights llc. smart vision lights. smartvision. smart vision lights llc. smartvision. d & y smartvision group corp. Smart Vision Lights Global ...

The template integration allows creating entities which derive their values from other data. This is done by specifying templates for properties of an entity, like the name or the state.

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

1/1.28sensorsize

Entities (sensors, binary sensors, buttons, images, numbers, and selections) are defined in your YAML configuration files under the template: key. You can define multiple configuration blocks as a list. Each block defines sensor/binary sensor/number/select entities and can contain an optional update trigger.

This example shows a multiple line template with an if test. It looks at a sensing switch and shows on/off in the frontend, and shows ‘standby’ if the power use is less than 1000 watts.

Expert news, reviews and videos of the latest digital cameras, lenses, accessories, and phones. Get answers to your questions in our photography forums.

The sensor is on if the template evaluates as True and off otherwise. The actual appearance in the frontend (Open/Closed, Detected/Clear etc) depends on the sensor’s device_class value

Define an automation trigger to update the entities. Optional. If omitted will update based on referenced entities. See trigger documentation.

This video tutorial explains how to set up a Trigger based template that makes use of an action to retrieve the weather forecast (precipitation).

If you don’t like the wording of a sensor output, then the Template Sensor can help too. Let’s rename the output of the Sun integration as a simple example:

Define actions to be executed when the trigger fires. Optional. Variables set by the action script are available when evaluating entity templates. This can be used to interact with anything using actions, in particular actions with response data. See action documentation.

Sensorsize comparison

Explore Siskiyou's fiber optic couplers, offering precise and reliable coupling solutions for your optical systems. Discover high-quality components for ...

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

Sets the class of the device, changing the device state and icon that is displayed on the UI (see below). It does not set the unit_of_measurement.

Configuration using our user interface provides a more limited subset of options, making this integration more accessible while covering most use cases.

Template entities can be triggered using any automation trigger, including webhook triggers. Use a trigger-based template entity to store this information in template entities.

Mar 1, 2001 — Edmund Scientific Sold ... Four years after putting Edmund Scientific on the selling block, Edmund Optics has sold the $10 million science ...

Focal Length Tolerance: ± 0.5%Centration Error: < 3 arc min.Clear Aperture: > 85% of diameterEdge Bevel: 0.3 mm face width at 45°

If the template accesses every state on the system, a rate limit of one update per minute is applied. If the template accesses all states under a specific domain, a rate limit of one update per second is applied. If the template only accesses specific states, receives update events for specifically referenced entities, or the homeassistant.update_entity action is used, no rate limit is applied.

This example shows how to combine a non-GPS (e.g., NMAP) and GPS device tracker while still including latitude and longitude attributes

When there are entities present in the template and no triggers are defined, the template will be re-rendered when one of the entities changes states. To avoid this taking up too many resources in Home Assistant, rate limiting will be automatically applied if too many states are observed.