- This reticle contains both Mil and MOA subtensions. On the vertical axis, the left side represents Mil subtensions and the right side of the vertical axis shows MOA, The center dot is 1 MOA.

- Based in Mil-Radian, the CW-1 reticle has 2.0 mil sub tensions on the horizontal axis up to 8 Mils. From 8 Mils to 15 Mils on the horizontal axis, the markings subtend 0.1 Mils. There are a total of the 30 mils subtended between the thicker horizontal posts.

Estimated Lead Time X days - Ships direct from vendor: Item is expected to ship from the vendor within the number of business days listed.

- The tick marks on the horizontal axis are spaced 1 Mil apart. Additionally, there is an opening to indicate every half Mil.

- The tick marks below the center dot can are dual purpose: they reference the BDC holdovers for 200m-800m and provide framing marks from edge to edge for a 1/2 meter target for 200m to 800m.

The No-Math Mil-Dot reticle allows for quick and easy shot placement by framing a known size target of 1/2 meter (~19inches). Adjust the magnification until the target fits within the center bracket either horizontally or vertically.

- The MLR is a mRad based reticle. Every hash mark's length on both horizontal and vertical axes corresponds to the Mil Value/10. For example, the 10 Mil Mark subtends 1 MIL. The 4 mil mark subtends 0.4 MILs and so forth.

- There are ranging scales in the lower quadrants for you to frame a known size target in meters or yards. Adjust the magnification until the target is framed within the scale according to its known size. The approzimate range to the target is the magnification X100m.

- The distance of the framed target can be determined by the corresponding Mil Marking x 100m. For example, if you frame a target with the first mark in the upper right quadrant, the approximate distance is 200m. There are 14 total framing marks that range out to 1500meters.

- The 5, 8 and 10 on the vertical axes below the horseshoe correspond to the 10mph wind hold at 500m, 800m and 1000m respectively.

- There is a ranging scale in the lower right quadrant that you can use to frame known sized targets. Simply adjust the magnification ring until the target is framed accurately in the ranging scale. Each scale in the ranging scale is used to frame 3".

NitrileGloves

Estimated Lead Time X days: Item is not stocked by Magid. Once order is placed item is expected to ship from the vendor within the number of business days listed to Magid and then Magid ships to the customer. Shipping times vary depending on your location.

- The Mil-Radian based CMR1 reticle is designed to be fast.With an illuminated horseshoe and center dot, the CMR14X24 enables shooters to quickly acquire targets even while moving.

MicrofiberGloves

- There are also dots and crosses spaced 1 mRad apart within the small inside horseshoe that can be used for estimating winds holds and distance or tracing shots.

Once this reticle is learned and mastered, the shooter can use CW-3 grid for precise first shot placement, mill targets with ease, and shoot quick follow-up shots.

- The UD5-30 Ranging Reticle is a mRad based reticle. There is a hash mark to indicate every half and whole mRad subtension.

- At 14X, each subtension on the reticle has twice the value indicated on the reticle. For example 1/2 MOA becomes 1MOA. 3MOA on the reticle becomes 6 MOA.

Shipping discount applies to customers without negotiated freight terms that pay list price and is only valid for orders shipped within the continental United States. Customers that ship to Hawaii, Alaska or Puerto Rico will receive 50% off of their UPS Ground shipping, that is the maximum shipping discount given for these states.

- The M40 USMC reticle is a reproduction of the vintage green M40 scopes from vietnam and has a dual focal plane ranging reticle.

- The first horizontal hash mark represents the 200 yard BDC hold. Every subsequent horizontal hash mark corresponds to the BDC holdover 100 yards out to 500 yards. The top of the thick post on the verical axis is the approximate holdover for 600 yards.

NylonGloves

In Stock: Item is in stock and ready to ship. 98.5% of in stock items ship within 24 hours. Shipping times vary depending on your location.

- At 7X, each subtension on the reticle has 4X its value indicated on the reticle. For example, 1 MOA now references 4 MOA. 1.5 MOA now references 6 MOA.

For elevation, the is a 0.1Mil space that indicated 1/2 Mil graduation. The larger 0.1Mil dot in the grid also indicates 0.5 Mil graduations. The 0.1 Mil graduations between 2-3 Mils above the center of the reticle can be used for vertically milling targets.

Learn 6 ways to help prevent and reduce opioid use disorder in your workplace and take the poll to share your experience!

Get ready for the thinnest and most comfortable 21-gauge gloves and sleeves on the market with cut protection from ANSI A4 to A6!

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

- The Long Eye Relief scope also comes in a BDC reticle version, based around the ballistics of the 168 grain, 308 Winchester.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

- There are ranging marks on the right side of the horizontal axis. These crosses can be used to frame a man sized target(1.75m tall by 1/2m wide). The largest framing crosson the right is used to frame a target at 100m. There are 10 crosses that can be used to frame distances every 100meters out to 1000meters.

Out of Stock: Item is not in stock currently and is on back order. You may still place an order for the item and it will ship as soon as it becomes available. Please call 1-800-867-1083 for immediate assistance.

With so much emphasis on increasing efficiency, it can be hard to strike a balance between your safety program and your budget. But with a little effort and planning, you can save money on hard costs like the PPE you need without compromising safety!

This is the Duplex Reticle. Heavy posts extend from the sides to allow the shooter's eye to naturally focus at the center crosshair.

- The M40 Tactical Hunter reticle features the same Accu-Range system as the USMC military model. Additionally, you can also frame a 36" horizontal target between the two verical hash marks on the horizontal axis. The approximate range is shown by the smallest number visible on the Accu-Range scale

- If you zero the center cross hairs at 200 yards, each subsequent BDC line represents the approximate holdover every 100 yards out.

For windage, every 0.2 Mil graduation is indicated by the tick marks on the horizontal cross hair to 5 Mils on each side.

- The Mil-Radian based AVS-CMR-7.62 AK is designed specifically around the ballistics of the Russian 7.62X39mm service round 57-H-231 or 7H23. The BDC is also accurate for 300 BLK supersonic up to 600 meters/ Simillar to the CMR14X24 reticle, the BDC tick marks can also be used to range 1/2 meter wide targets from end to end.

- By framing a 18" target between the parallel lines, the M40 USMC reticle tells you the approximate distance to the target on the Accu-Range scale in the lower right quadrant. The approximate range is the lowest number that is visible on the Accu-Range scale.

Designed with the feedback and insight of professional competitive shooters and military trained marksmen, the CW-3 is a milliradian based reticle that enables the operator to quickly range targets, and make holdovers. Using this reticle, the shooter can visibly trace the bullet's path down range. Additionally, both the elevation and windage axes are numbered for quick holdover reference.

- The Mil-Radian based AVS-CMR4 reticle is designed around the ballistics of a 62grain .223 and 168 grain .308. The BDC holdover marks also double as ranging marks for a known 1/2 meter sized target for the respective distances.