Milling glasspdf

Image

Cnc machinemilling glass

New and Refurbished Dental Equipment at Affordable Prices Buffalo Trap-Eze BT Bottle Trap Complete Kit [62150] - The new Trap-Eze BT provides a convenient and easy to use bottle-style trap for permanent plumbing into the existing sanitary drain...

Contain the material and water in a tray that can be removed and left out for the water to evaporate. The tray may need to be made to hold the part. Place a disposable towel (I use lintless blue shop wipes for this) on the surface. It will sink as the water evaporates. When it gets down to moist muck in the bottom, wipe the muck out and dispose of appropriately. If the container needs further cleaning, rewet and a fresh wipe to repeat the process.

It’s been done — usually using a diamond burr bit with the material submerged in water — the problem then becomes one of safely disposing of the glass debris in the water (apparently it’s potentially damaging to municipality water treatment filters). Another possibility is the glass shattering from internal stresses.

Milling glasscutting

I need to accurately cut 1.12mm thick glass sheets for a scale model. Mostly precisely placed holes and outside dimensions that include a curve.

If it is possible to put a towel in the bottom before the work, it is easier, since the waste will be trapped between the two layers. I have done this with success when using a water tray below to catch runoff while drilling glass.

Milling glassnear me

Went ahead and added that: https://www.shapeoko.com/wiki/index.php/Materials#Glass (and a link back here, so now it’s circular).

I considered it problematic enough that I didn’t bother to make note of the instances when this was shown on-line at: https://www.shapeoko.com/wiki/index.php/Materials

This is what a utility sink with a plaster trap would be helpful for… if that’d be sufficient. Don’t know how much the glass particulates would settle out or not. Solids that don’t belong in the water system are a common problem that dental practices and art studios both deal with in their own way with trap systems. Something like: