Free Space Opticsequipment

For custom engravings on the lens front ring (please see the last photo), please fill out the Special Instructions box in the Cart with the engraving message (limited to eight characters) and add $110 USD using tips during the check-out process.

(Note: Shipping may take longer for special edition sets or ship from factory due to logistics and COVID, approximate time: two weeks via DHL/UPS/Fedex. Customer will receive an email if delay occurs)

For the best possible service for our customers in United States, our products are now only available from our partner Popflash.

Free spaceoptical communication projects

FSO is often referred to as a futuristic technology for space applications, but can also be used for ground-to-ground links in access networks. FSO can deliver a wireless-access solution for quick deployment and with more bandwidth capacity, security features, and less power consumption than traditional point-to-point microwave links. And since it does not use the RF spectrum, there is no need to secure spectrum licenses.

Free space opticsapplications

- Lens Body is made from solid brass, stainless steel or titanium (depending on finishes). - Elements inside are made in-house with lanthanide and lead infused.

Simply changing over to higher carrier frequencies will limit the reach of microwave links. The radio spectrum is also quite crowded, and carriers might not have the available licensed spectrum to deploy this wireless link. And microwave point-to-point links produce plenty of heat while struggling to deliver capacity beyond a few gigabits per second.

FSO has struggled to break through into practical applications despite these benefits because of certain technical challenges. Communications infrastructure, therefore, focused on more stable transmission alternatives such as optical fiber and RF signals. But research and innovation during the last few decades is removing these technical barriers.

free-space optical communication pdf

- Box - Instructions - Metal Front Lens Cap - Metal Rear M-Mount Lens Cap - 35/135 M-Mount Adapter if the Lens is in LTM Mount - Lens Case - 1 Year Light Lens Lab Warranty *Special/Limited Editions such as Titanium Grey, Ceramic White and Bare Brass will also include matching IROOA lens hood and UV filter.

Free space Opticstechnology

As optical signals move deeper and deeper into access networks, achieving the ambitious performance goals of 5G architectures requires more optics than ever between small cell sites.

One obstacle to achieving longer distances with FSO is the quality of the laser signal. Over time, FSO developers have found a solution to this issue in adaptive optics systems. These systems compensate for distortions in the beam by using an active optical element—such as a deformable mirror or liquid crystal—that dynamically changes its structure depending on the shape of the laser beam. Dutch startup Aircision uses this kind of technology in its FSO systems to increase their tolerance to atmospheric disruptions.

FSO can deliver a wireless access solution to be deployed quickly and with more bandwidth capacity, security features, and less power consumption than traditional point-to-point microwave links. And since it does not use the RF spectrum, it is unnecessary to secure spectrum licenses. Affordable direct-detect and coherent transceivers based on SoCs can further improve the quality and affordability of FSO transmission.

Free space opticscommunication

Laser beams in FSO are so narrow and focused that these issues don’t exist. At 1 km, a typical laser beam only spreads out about 2 m, and at 5 km, only about 5 m. There are no side and back lobes to worry about and no near-zone reflections. The beam is so narrow that intercepting the transmission becomes an enormous challenge. An intruder would need to get within inches of a terminal or the line of sight, making it easier to be discovered. To complicate things further, the intruder’s terminal would also need to be very well aligned to pick up enough of a signal.

Extending fiber optics deeper into remote communities “is a critical economic driver, promoting competition, increasing connectivity for the rural and underserved, and supporting densification for wireless,” according to Deloitte, a financial and tech consulting firm.1

Carriers have used fixed microwave links for years to handle these situations. But radio microwave frequencies might not be enough as the world demands greater internet speeds.

This is where free-space optics (FSO) comes into play. With FSO, a high-power laser source converts data into laser pulses and sends them through a lens system and into the atmosphere. The laser travels to the other side of the link and goes through a receiver lens system. A high-sensitivity photodetector then converts these laser pulses back into electronic data that can be processed (see Fig. 1). So instead of using an optical fiber as a medium to transmit the laser pulses, FSO uses air as a medium. The laser typically operates at an infrared wavelength of 1550 nm, which is safer on the eye.

One understated benefit of FSO is, from a physics perspective, they’re arguably the most secure form of wireless communication available today.

Free-space optical transceiver

Free Space Opticscompanies

As the industry has seen during the last several years, optical transmission systems are being miniaturized from big, expensive line cards to small, affordable pluggables the size of a large USB stick. These compact transceivers with highly integrated optics and electronics have shorter interconnections, fewer losses, and more elements per chip area. These features all led to reduced power consumption over the last decade. Even greater efficiency gains are made possible by an optical system-on-chip (SoC) that integrates all photonic functions on a single chip—including lasers and amplifiers.

Fortunately, FSO developers also use sophisticated digital-signal processing techniques (DSP) to compensate for these impairments. These DSP methods allow reliable, high-capacity, quick deployments even through thick clouds and fog. FSO links can now handle gigabit-per-second capacity over several kilometers, thanks to all these advances in technologies.

- Focal Length: 35mm - Coverage: 135 Full Frame (24x36mm) - Optics: Double-Gauss Design, Eight Elements in 6 groups - Minimal Focus Distance: 0.7 meters with rangefinder coupling - Diaphragm: Even half-stop aperture, manual control from f/2 to f/16 - Lens Mount: Leica M mount, Leica Thread Mount (With LTM-M adapter included) - Filter Thread: E39. - Lens Hood: Clip-on A42 lens hood, IROOA - Dimensions and Weight: Length: 35.5 to 36mm Diameter: 51mm Weight: 206g to 261g (depending on different finishes)

FSO systems can handle these alignment issues with fast steering mirror (FSM) technology. These mirrors are driven with electrical signals and are fast, compact, and accurate enough to compensate the disturbances in the beam trajectory. But even if the system can maintain its beam trajectory and shape, atmospheric turbulence can still degrade the message and cause interference in the data.

While fiber-optic communications drove the push for smaller and more efficient optical transceivers, this progress also has a beneficial impact on FSO.

A collaboration between Aircision and TNO demonstrated in 2021, for example, their FSO systems could reliably transmit 10 Gbit/s over 2.5 km. “It’s an important milestone to show we can outperform millimeter E-band antennas and provide a realistic solution for the upcoming 5G system,” says Aircision’s scientific director John Reid.

But there are cases in which fiber isn’t cost-effective to deploy. For example, a network carrier might need to quickly increase its access network capacity for a big festival, and there is no point in deploying extra fiber. In many remote areas, the customer base is so small, the deployment of fiber won’t produce a return on investment. These situations can be addressed via some kind of wireless access solution.