Types ofmicroscope objectives

Investigate how the size of the light cone entering the objective front lens changes with the objective numerical aperture value.

Explore how variations in the refractive index of the imaging medium effect the ability of an objective to capture light rays emanating from the specimen.

Initial installation costs for new camera sites vary considerably with the accessibility of the location and whether existing infrastructure (i.e., an existing tower) can be used to mount the cameras. Locations with existing infrastructure can be retro-fitted for approximately $10,000. In areas where there is no existing infrastructure to connect to, the installation costs can be $50,000, or more.

Identification of the properties of individual objectives is usually very easy because important parameters are often inscribed on the outer housing (or barrel) of the objective itself as illustrated in Figure 1. This figure depicts a typical 60x plan apochromat objective, including common engravings that contain all of the specifications necessary to determine what the objective is designed for and the conditions necessary for proper use.

The objective depicted on the left in Figure 3 has a parfocal distance of 45mm and is labeled with an immersion medium color code in addition to the magnification color code. Parfocal distance is measured from the nosepiece objective mounting hole to the point of focus on the specimen as illustrated in the figure. The objective on the right in Figure 3 has a longer parfocal distance of 60 millimeters, which is the result of its being produced to the Nikon CFI60 200/60/25 Specification, again deviating from the practice of other manufacturers such as Olympus and Zeiss, who still produce objectives with a 45mm parfocal distance. Most manufacturers also make their objective nosepieces parcentric, meaning that when a specimen is centered in the field of view for one objective, it remains centered when the nosepiece is rotated to bring another objective into use.

For many years, natural fluorite was commonly used in the manufacture of fluorite (semi-apochromat) and apochromat objectives. Unfortunately, many newly developed fluorescence techniques often rely on ultraviolet excitation at wavelengths significantly below 400 nanometers, which is severely compromised by autofluorescence that occurs from natural organic constituents present in this mineral. Also, the tendency of natural fluorite to exhibit widespread localized regions of crystallinity can seriously degrade performance in polarized light microscopy. Many of these problems are circumvented with new, more advanced materials, such as fluorocrown glass.

Most manufacturers have now transitioned to infinity-corrected objectives that project emerging rays in parallel bundles from every azimuth to infinity. These objectives require a tube lens in the light path to bring the image into focus at the intermediate image plane. Infinity-corrected and finite-tube length microscope objectives are not interchangeable and must be matched not only to a specific type of microscope, but often to a particular microscope from a single manufacturer. For example, Nikon infinity-corrected objectives are not interchangeable with Olympus infinity-corrected objectives, not only because of tube length differences, but also because the mounting threads are not the same pitch or diameter. Objectives usually contain an inscription denoting the tube focal length as will be discussed.

Whatis objective lens inmicroscope

During the last five fire seasons (2016 – 2020) ALERTWildfire provided critical information for over 1,500 fires, increasing the effectiveness and timeliness of emergency response efforts. While the most recent 2020 fire season was historic in the acreage burned, it had a lower loss of life than previous fire seasons. This is in part due to coordinated, timely evacuation efforts made possible by the ALERTWildfire network.

Microscope manufacturers offer a wide range of objective designs to meet the performance needs of specialized imaging methods, to compensate for cover glass thickness variations, and to increase the effective working distance of the objective. Often, the function of a particular objective is not obvious simply by looking at the construction of the objective. Finite microscope objectives are designed to project a diffraction-limited image at a fixed plane (the intermediate image plane), which is dictated by the microscope tube length and located at a pre-specified distance from the rear focal plane of the objective. Microscope objectives are usually designed to be used with a specific group of oculars and/or tube lenses strategically placed to assist in the removal of residual optical errors. As an example, older Nikon and Olympus compensating eyepieces were used with high numerical aperture fluorite and apochromatic objectives to eliminate lateral chromatic aberration and improve flatness of field. Newer microscopes (from Nikon and Olympus) have objectives that are fully corrected and do not require additional corrections from the eyepieces or tube lenses.

According to the ALERTWildfire website, if a fire is in the center of the screen and zoomed in to, then it likely has already been reported and emergency services are responding. However, if smoke is in the distance and not centered on the screen, then there is a chance that is a new fire start. Users should immediately call 911 to report any potential new fires. Only emergency personnel can adjust the viewing angle and zoom of the cameras. Citizen viewers can monitor the camera feeds, but cannot adjust the camera angle or zoom.

CalFire and local firefighting agencies can use your help in monitoring the ALERTWildfire camera network for new fire starts. Early spotting and reporting of fires can give emergency personnel a jump-start on suppressing the fire and keeping our communities safe. Citizen volunteers are crucial to the success of the ALERTWildfire network and CalFire urges those who are able, to become volunteer fire spotters. Several communities in California have formed volunteer fire watch groups- such as Orange County Fire Watch which has over 100 members- that take turns monitoring local cameras during high fire risk periods. If you have the time, and a reliable internet connection, please consider becoming an ALERTWildfire volunteer fire spotter to help keep our community safe.

Microscopeparts

The mission of the MCFSC is to inform, empower and mobilize county residents to survive and thrive in a wildfire-prone environment.

Discover how internal lens elements in a high numerical aperture dry objective may be adjusted to correct for fluctuations in cover glass thickness.

As of February 2021 there were 16 cameras mounted within Mendocino County, with dozens of cameras in the surrounding counties. Mendocino County camera locations and live feeds can be viewed by visiting the ALERTWildfire.org website and selecting the “North Coast” region.

Whatdoesthestagedo on a microscope

Other features found on specialized objectives are variable working distance (LWD) and numerical aperture settings that are adjustable by turning the correction collar on the body of the objective as illustrated in Figure 2. The plan fluor objective on the left has a variable immersion medium/numerical aperture setting that allows the objective to be used with both air and an alternative liquid immersion medium, glycerin. The plan apo objective on the right has an adjustable working distance control (termed a "correction collar") that allows the objective to image specimens through glass coverslips of variable thickness. This is especially important in dry objectives with high numerical aperture that are particularly susceptible to spherical and other aberrations that can impair resolution and contrast when used with a cover glass whose thickness differs from the specified design value.

Aims ofmicroscopepractical

Anyone with internet access can use the ALERTWildfire website (http://www.alertwildfire.org/index.html) to view hundreds of live camera feeds to monitor and report wildfires. Upon visiting the website, users must select a region by clicking on the map and then clicking on the name of the region in the pop-up box. After selecting a region, there will be a map displaying all of the camera locations within that region, and their current area of direction. Below the map are thumbnail views of all of the cameras in that region. These small thumbnail views allow users to view multiple camera feeds at once. Any camera can be enlarged into the main view by clicking on the thumbnail. Time lapse reviews for the most recent 12 hours are also available in the main view window by clicking the “play” button in the upper left hand corner.

Cameras are placed in high fire risk areas at locations that have clear views of the surrounding area. Those interested in installing additional ALERTWildfire cameras in their area, can contact Dr. Graham M. Kent of the University of Nevada, Reno at gkent@unr.edu or 775-527-1574.

Cements employed in building multiple lens elements usually have a thickness around 5-10 microns, which can be a source of artifacts in groups that have three or more lens elements cemented together. Doublets, triplets, and other multiple lens arrangements can display spurious absorption, transmission, and fluorescence characteristics that will disqualify the lenses for certain applications.

Illustrated in Figure 4 is a schematic drawing of light waves reflecting and/or passing through a lens element coated with two antireflection layers. The incident wave strikes the first layer (Layer A in Figure 4) at an angle, resulting in part of the light being reflected (R(o)) and part being transmitted through the first layer. Upon encountering the second antireflection layer (Layer B), another portion of the light is reflected at the same angle and interferes with light reflected from the first layer. Some of the remaining light waves continue on to the glass surface where they are again both reflected and transmitted. Light reflected from the glass surface interferes (both constructively and destructively) with light reflected from the antireflection layers. The refractive indices of the antireflection layers vary from that of the glass and the surrounding medium (air). As the light waves pass through the antireflection layers and glass surface, a majority of the light (depending upon the incident angle--usual normal to the lens in optical microscopy) is ultimately transmitted through the glass and focused to form an image.

ALERTWildfire partners with local governmental agencies and utility providers to fund the installation, maintenance, and operating expenses for the camera networks. In the North Coast region, PG&E sponsors 21 of the 31 camera sites, and CalFire sponsors the remaining ten sites. All of the 16 camera sites within Mendocino County are sponsored and funded by PG&E.

Whatdoestheocular lensdo on a microscope

Special Features - Objectives often have additional special features that are specific to a particular manufacturer and type of objective. The plan apochromat objective illustrated in Figure 1 has a spring-loaded front lens to prevent damage when the objective is accidentally driven onto the surface of a microscope slide.

ALERTWildfire is a partnership of three universities – University of California, San Diego; University of Nevada, Reno; and the University of Oregon – who are collaborating with local governmental agencies and utility companies to provide public access to state-of-the-art video monitoring for wildfires throughout the western US.

Extra Low Dispersion (ED) glass was introduced as a major advancement in lens design with optical qualities similar to the mineral fluorite but without its mechanical and optical demerits. This glass has allowed manufacturers to create higher quality objectives with lens elements that have superior optical corrections and performance. Because the chemical and optical properties of many glasses are of a proprietary nature, documentation is difficult or impossible to obtain. For this reason the literature is often vague about the specific properties of glasses utilized in the construction of microscope objectives.

Microscope Objectivesmagnification

Michael W. Davidson - National High Magnetic Field Laboratory, 1800 East Paul Dirac Dr., The Florida State University, Tallahassee, Florida, 32310.

Although not common today, other types of adjustable objectives have been manufactured in the past. Perhaps the most interesting example is the compound "zoom" objective that has a variable magnification, usually from about 4x to 15x. These objectives have a short barrel with poorly designed optics that have significant aberration problems and are not very practical for photomicrography or serious quantitative microscopy.

Magnesium fluoride is one of many materials utilized in thin-layer optical antireflection coatings, but most microscope manufacturers now produce their own proprietary formulations. The general result is a dramatic improvement in contrast and transmission of visible wavelengths with a concurrent destructive interference in harmonically-related frequencies lying outside the transmission band. These specialized coatings can be easily damaged by mis-handling and the microscopist should be aware of this vulnerability. Multilayer antireflection coatings have a slightly greenish tint, as opposed to the purplish tint of single-layer coatings, an observation that can be employed to distinguish between coatings. The surface layer of antireflection coatings used on internal lenses is often much softer than corresponding coatings designed to protect external lens surfaces. Great care should be taken when cleaning optical surfaces that have been coated with thin films, especially if the microscope has been disassembled and the internal lens elements are subject to scrutiny.

See ALERTWildfire.org FAQs (http://www.alertwildfire.org/faq.html) for more information on how to use the online monitoring and reporting system.

The ALERTWildfire network is an expansion of the ALERTTahoe monitoring program, which was first piloted in the Lake Tahoe area in 2013. The network has since expanded to include much of California and the neighboring states of Oregon, Washington, Idaho, Nevada, and Utah. CalFire, Pacific Gas and Electric, Sonoma Water, Southern California Edison, San Diego Gas and Electric, NV Energy, and several county governments have teamed up with ALERTWildfire to expand the fire monitoring network across California.

Multilayer Antireflection Coatings - One of the most significant advances in objective design during recent years is the improvement in antireflection coating technology, which helps to reduce unwanted reflections (flare and ghosts) that occur when light passes through a lens system, and ensure high-contrast images. Each uncoated air-glass interface can reflect between four and five percent of an incident light beam normal to the surface, resulting in a transmission value of 95-96 percent at normal incidence. Application of a quarter-wavelength thick antireflection coating having the appropriate refractive index can increase this value by three to four percent. As objectives become more sophisticated with an ever-increasing number of lens elements, the need to eliminate internal reflections grows correspondingly. Some modern objective lenses with a high degree of correction can contain as many as 15 lens elements having many air-glass interfaces. If the lenses were uncoated, the reflection losses of axial rays alone would drop transmittance values to around 50 percent. The single-layer lens coatings once utilized to reduce glare and improve transmission have now been supplanted by multilayer coatings that produce transmission values exceeding 99.9 percent in the visible spectral range. These specialized coatings are also used on the phase plates in phase contrast objectives to maximize contrast.

Whatdoesthestage clipsdo on a microscope

From the discussion above it is apparent that objectives are the most important optical element of a compound microscope. It is for this reason that so much effort is invested in making sure that they are well-labeled and suited for the task at hand. We will explore other properties and aspects of microscope objectives in other sections of this tutorial.

Wildfire monitoring efforts in California now include hundreds of wildland monitoring cameras positioned throughout much of the state’s high fire risk areas. Currently, there are over 620 ALERTWildfire cameras in California, with an estimated 1,000 to be online by 2023. In the North Coast region- which contains Mendocino, Humboldt, and Del Norte counties- there are 31 cameras, 16 of which are mounted within Mendocino County.

There is a wealth of information inscribed on the barrel of each objective, which can be broken down into several categories. These include the linear magnification, numerical aperture value, optical corrections, microscope body tube length, the type of medium the objective is designed for, and other critical factors in deciding if the objective will perform as needed. A more detailed discussion of these properties is provided below and in links to other pages dealing with specific issues.

Glass Design - The quality of glass formulations has been paramount in the evolution of modern microscope optics, and there are currently several hundred of optical glasses available for the design of microscope objectives. The suitability of glass for the demanding optical performance of a microscope objective is a function of its physical properties such as refractive index, dispersion, light transmission, contaminant concentrations, residual autofluorescence, and overall homogeneity throughout the mixture. Care must be taken by optical designers to ensure that glass utilized in high-performance objectives has a high transmission in the near-ultraviolet region and also produces high extinction factors for applications such as polarized light or differential interference contrast.

Annealing of optical glass for the manufacture of objectives is critical in order to remove stress, improve transmission, and reduce the level of other internal imperfections. Some of the glass formulations intended for apochromat lens construction are slow-cooled and annealed for extended periods, often exceeding six months. True apochromat objectives are manufactured with a combination of natural fluorite and other glasses that have reduced transmission in the near-ultraviolet region.

Mendocino County residents can use the ALERTWildfire website to monitor the path of wildfires in their area, allowing them to make informed decisions regarding the threat to their properties and evacuation routes.

Parfocal Distance - This is another specification that can often vary by manufacturer. Most companies produce objectives that have a 45 millimeter parfocal distance, which is designed to minimize refocusing when magnifications are changed.

These cameras utilize state-of-the-art pan-tilt-zoom (PTZ) technology which enables them to perform 360-degree sweeps every two minutes. The cameras can view up to 60 miles on a clear day, and up to 120 miles at night due to near-infrared night vision technology. These publically accessible wildfire cameras allow emergency personnel and concerned citizens to monitor their region for signs of fire. The cameras can zoom in on smoke sightings, allowing emergency personnel to accurately gauge the location, size, and direction of travel of wildfires, which provides a crucial head-start on fire suppression and evacuation efforts.