Most glasses are transparent for near-infrared light but are strongly absorbing for longer wavelengths, where photons can be directly converted to phonons. For silica glass, as used e.g. for silica fibers, strong absorption occurs beyond ≈ 2 μm.

Low-cost tools for visualizing infrared light are laser viewing cards which emit visible light (or change their color) when hits by infrared light.

Infrared light is light with a vacuum wavelength longer than ≈ 700–800 nm, the upper limit of the visible wavelength range. That limit is not well-defined, as the responsivity of the eye is reduced very gradually in that spectral region. Although the responsivity e.g. at 700 nm is already very low, even the light from some laser diodes at wavelengths beyond 750 nm can be seen if that light is sufficiently intense. Such light may be harmful for the eye even if it is not perceived as very bright. The upper limit of the infrared spectral region in terms of wavelength is also not precisely defined; it is usually understood to be roughly 1 mm.

We offer IR optics in germanium, silicon, ZnSe, ZnS, BaF2, MgF2 or chalcogenide glass – lenses, prisms and windows. We do on demand manufacturing.

Ordinary light bulbs (incandescent lamps), generating thermal radiation, emit substantially more infrared light than visible light; this is the essential reason for their very limited power conversion efficiency of the order of 5–10%. Sunlight also has strong infrared components.

Ecoptik manufactures precision infrared optical devices based on germanium, silicon, zinc selenide, zinc sulfide and other materials. Customized high-precision and complex optical devices, including short-wave infrared optical devices of many kinds can be made. Feel free to contact us!

Further, our infrared windows can be used at 0.75 μm to 20 μm and our infrared lenses are suitable in a wide spectral range from 700 nm to 20000 nm. Infrared domes are suitable for 3 μm to 12 μm. AR coating options include broadband anti-reflection coatings (BBAR), long-pass anti-reflection coatings and hard diamond-like carbon (DLC) coating for application in harsh environments.

Vortex Optical Coatings design and manufacture infrared filters for the most demanding and complex applications. We cover the band from 1–6 microns.

IR Window for electrical panel

Edmund Optics offers a wide range of infrared optics, using materials like aluminum, calcium fluoride, fused silica, germanium, magnesium fluoride, sapphire, silicon, zinc selenide, zinc sulfide and other infrared materials.

I am not an expert here, but my understanding is that problematic effects can result only from heating the retina. You would probably feel uncomfortable before this becomes a real problem. When you close your eyes, it is presumably a too weak effect to be problematic, unless perhaps you go close to such a heater.

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Custom mid-IR optics can be designed for spectral range 1 – 5 µm, using standard or CaF2, MgF2, YAG, sapphire or silicon substrates.

Note: the article keyword search field and some other of the site's functionality would require Javascript, which however is turned off in your browser.

IRISS IRwindows

EKSMA Optics has substrates and finished optical components – windows, lenses and mirrors made from lithium fluoride (LiF), calcium fluoride (CaF2), barium fluoride (BaF2), sapphire (Al2O3), zinc selenide (ZnSe) and germanium (Ge) for laser and optical instruments applications in the infrared wavelength range.

LightMachinery has extensive expertise in the manufacturing and testing of infrared optics based on zinc selenide, zinc sulfide and germanium optics for CO2 lasers, e.g. in the form of mirrors, lenses and rhomb retarders. In addition, we have a thorough understanding of the importance of high damage threshold coatings for our laser customers.

Infrared light can also be generated via nonlinear frequency conversion. For example, mid-infrared light can be generated by difference frequency generation in nonlinear crystal materials, or with optical parametric oscillators. See also the article on mid-infrared laser sources.

FLIR IRWindows

I have a full spectrum infrared sauna and wonder if it is bad for my eye health. I close my eyes in the sauna but wondered how the IR can be so good for your skin and body but bad for your eyes.

CorDEX IRWindows

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.

Many optical elements working in the visible spectral range can also work well in the near infrared, possibly with modified dielectric coatings. For longer wavelengths (mid and far infrared), one requires special infrared optics, which are often based on optical materials with low phonon energies in order to obtain a long infrared absorption edge. See the article on infrared optics for more details.

Outside the area of lasers, there are other kinds of infrared emitters, particularly infrared light emitting diodes (LEDs) and thermal emitters, the latter generating thermal radiation.

We offer a wide range of IR substrates, including Ge, Si, ZnSe, ZnS, ZnS , CaF2, BaF2 and GaAs. Our lenses and windows are available with multiple anti-reflection coating options that can increase durability and improve performance.

Fluke IR Window

Avantier produces a wide range of high quality infrared optics, including infrared lenses, prisms, windows, mirrors, and laser and imaging assemblies. Our state-of-the-art equipment allows us to achieve unparalleled precision and surface quality, and every piece we manufacture is subject to stringent quality controls.

Knight Optical can offer a variety of stock and custom infrared optics, such as lenses, windows, prisms and filters. We can provide these in a wide range of different materials including germanium, silicon, zinc selenide, calcium fluoride, sapphire, magnesium fluoride, zinc sulphide. Our custom infrared optics include aspheric lenses, filters working in the IR wavelengths, and coatings optimised for the different thermal wavebands, as well as diamond-like carbon (DLC) coatings for extra durability of a surface.

Most lasers, for example Nd:YAG lasers, many fiber lasers and the most powerful laser diodes, emit near-infrared light. There are comparatively few laser sources for the mid- and far-infrared spectral regions. CO2 lasers can emit at 10.6 μm and some other wavelengths in that region. Typical problems with laser crystals for solid-state mid-IR lasers are the limited transparency range of the host crystal and the tendency for fast multi-phonon transitions bypassing the laser transition; crystal materials with very low phonon energies are required. Cryogenic lead-salt lasers were in earlier years often used for mid-infrared spectroscopy, but are now rivaled by quantum cascade lasers, which partly even achieve continuous-wave operation at room temperature. Free electron lasers can be used as broadly tunable and very powerful sources of infrared light.

Particularly for near-infrared light, there are infrared viewers, where infrared light from some scenery is imaged onto an infrared-sensitive photocathode, and generated photoelectrons are accelerated with a high voltage to a fluorescent screen, which then displays the image e.g. in green color. Such IR viewers are used e.g. in laser labs for tracking infrared laser beams.

Note: this box searches only for keywords in the titles of articles, and for acronyms. For full-text searches on the whole website, use our search page.

Shalom EO offers a wide range of infrared optics – not only singlet IR optical lenses, IR optical windows and IR domes, but also lens modules designed for MWIR (3-5 μm) and LWIR (8-12 μm) thermal imaging cameras. A variety of specific infrared optical materials are available: germanium, zinc selenide (ZnSe), zinc sulfide (ZnS), chalcogenide glass, silicon, sapphire and fluoride (CaF2, BaF2, MgF2 and LiF). Our fabrication techniques include conventional polishing and diamond turning. Moreover, multiple types of modules with flat, spherical and aspherical optical surfaces are optional for different requirements. Referring to the thermal imaging lenses, Hangzhou Shalom EO offers standard lenses and hundreds of custom free-designed lens modules (e.g. athermalized lenses, fisheye lenses, single FOV, dual FOV, zoom lenses).

At Shanghai Optics we design and manufacture a wide variety of custom optical IR components. Our state of the art equipment allows us to achieve unparalleled precision and surface quality, and every piece we manufacture is subject to stringent quality controls.

Windows infraredvs ir

Using our advertising package, you can display your logo, further below your product description, and these will been seen by many photonics professionals.

UM Optics is the biggest optics supplier in China. We supply CaF2, BaF2, MgF2, LiF material covering the VUV to IR spectrum. We can also deliver cut blanks, polished lens, drilled windows, spherical lenses, aspheric lenses, galvo scanning mirrors, prisms, cylindrical lenses and mirrors in very large quantities at best price. UM Optics also grows silicon material in optical grade and supplies optics like silicon wafers, mirrors, AR-coated lenses, and prisms. We are also good at ZnSe/ZnS/Ge IR material optics.

IRwindowsfor transformers

He Rui Optics offers infrared optics based on a wide range of materials, with diameters from 0.2 mm to 300 mm and with different surface quality standards.

IR Windows  |  Dual View Windows |  Large Format Dual View Windows |  Ultrasound Ports  |  Viewing Windows  |  Labels and TagsRequest a Quote  |  Request a Demonstration |  Contact Exiscan |  Rep Loginphone: +1(585)366-0333   |    email: This email address is being protected from spambots. You need JavaScript enabled to view it.

IRwindowsfor switchgear

In illumination systems based on incandescent lamps, e.g. in high-power image projectors, the produced infrared radiation is useless and can cause detrimental effects. Therefore, certain heat control filters have been developed for removing infrared light. They can be realized in the form of cold mirrors or hot mirrors.

IRD Ceramics manufactures precision infrared optical components which are essential to infrared cameras and sensors used by homeland security, border patrol, defense and security companies. We perform all fabrication in house, allowing us to produce low-cost IR mirrors, lenses and windows for commercial applications as well as customized lenses to meet the exact demands of defense and security companies. IRD Ceramics works with sapphire, silicon, chalcogenides, germanium, BaF2, CaF2, zinc selenide and more.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

Note that the mid-infrared according to ISO 20473:2007 is not equivalent to the mid-wave infrared (see above), but spans the whole wavelength region from 3 μm to 50 μm, where the far infrared starts according to ISO 20473. IR-C according to DIN spans the range from 3 μm to 15 μm.

Infrared light is also called heat radiation, since thermal radiation from hot bodies is mostly within the infrared region. Even at room temperature and below, bodies emit significant amounts of mid- and far-infrared light, which can be used for thermal imaging. For example, infrared images of a heated house in winter can reveal leaks of heat (e.g. at windows, roofs, or poorly insulated walls behind radiators) and thus help to efficiently direct measures for improvement.

UltraFast Innovations (UFI®) offers a varied selection of broadband infrared mirrors designed for ultrafast laser systems. For example, we provide mirrors for thulium- and holmium-based systems operating in the 2-μm spectral region, Cr:ZnS systems around 2.4 μm and Cr:ZnSe for 3.2 μm. Such mirrors can be provided with precise control of chromatic dispersion.

Many types of photodetectors are suitable for detecting infrared light. For example, photodiodes based on semiconductors with a sufficiently small band gap energy can be used. However, detectors for e.g. the mid-infrared region require such a small bandgap energy that carriers can be excited not only by light, but also via thermal energy because the photon energy is not much larger than <$k_\textrm{B}T$> at room temperature. Therefore, infrared detectors often have to be cooled to fairly low temperatures in order to increase their sensitivity. The same holds for infrared cameras.

OPTOMAN employs IBS technology to manufacture dispersive mirrors made for mid-IR (2 – 6 µm). Broadband dispersive and low GDD mirrors for mid-IR range can reduce or even completely eliminate the need to use combinations of various bulk materials to compensate dispersion.