Hinkleylighting

Nov 7, 2024 — ... light source directly onto the plane of the specimen, a technique called critical illumination. Alternatively, the image of the source is ...

To ensure proper operation and to maximize operating lifetime, this LED backlight must be mounted onto an appropriate heat sink; the housing includes four counterbored slots that accept 1/4" (M6) cap screws (not included) for compatibility with both imperial and metric hole patterns. For convenient connection to the drivers listed on the LED Drivers tab, this LED backlight has a connection cable with an M8 connector; see the Pin Diagrams tab for the M8 connector pin information.

Americanlighting

6 — ... compact, MagSafe-compatible two-way mini LED phone light for aspiring content creators ... First-of-Its-Kind Dual Mirror Light for Quick Touch-Ups ...

2023921 — Spotlights are directional lights, meaning you can precisely control the direction in which the light is cast. This flexibility allows you to ...

Main » Miniatures » HeroClix » Spotlight (Red) - R202.12. Spotlight (Red) - R202.12. DC War of the Light. (4). Average 5.0 from 4 ratings., 4.

A light-harnessing serum, makeup primer in one, designed to instantly blur away textural imperfections and dullness just like a ring light for unrivalled ...

Kichlerlighting

WateRx™ UVMAX Regular price$1400.00 Ultraviolet Water Filter - 3/4 Inch Maintenance Cycle: 12 Months The WateRx™ UVMAX is an ultraviolet-light filter ...

The diagram to the right shows the male connector of the LEDBW1 Backlight. It is a standard M8 x 1 sensor circular connector. Pins 1 and 2 are the connection to the LED. Pin 3 and 4 are used for the internal EEPROM. If using an LED driver that was not purchased from Thorlabs, be careful that the appropriate connections are made to Pin 1 and Pin 2 and that you do not attempt to drive the LED through the EEPROM pins.

KuzcoLighting

Tgllighting

The Jonard Tools Mini Optical Power Meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables.

EliteLighting

Optical astronomy refers to an area of astronomy where astronomers observe and analyse light from the Universe that falls within the wavelength range that the ...

To fully support the max optical power of the LED you intend to drive, ensure that the max voltage and max current of the driver are equal to or greater than those of the LED.

Rplighting

Thorlabs' Cage-Compatible Diffuse Backlight LED is a high-power, cold white LED that provides stable, uniform illumination. By integrating a Ø25 mm diffused window, this LED backlight produces a flatter field of illumination as compared to a point source, making it ideal for machine vision applications.

Constructed from anodized aluminum, this LED housing features four through holes that are compatible with our Ø6 mm ER cage rods. This allows for integration with our 30 mm cage systems and DIY Cerna components, such as the CSA1001 Fixed Arm. Each cage rod through hole is accompanied by two side-located locking setscrews, which can be secured using a 5/64" (2.0 mm) hex key or balldriver.

Copyright 2024, Edmund Optics Inc., 14F., No.83, Sec. 4, Wenxin Road, Beitun District , Taichung City 406, Taiwan (R.O.C.).

Driver OptionsThorlabs offers six drivers compatible with this LED backlight: DC2200, UPLED, DC40, LEDD1B, DC4100, and DC4104 (the latter two require the DC4100-HUB). See the LED Drivers tab for compatibility information and a list of specifications. We recommend using the DC2200 or DC40 for applications that require the full power of the LED; the LEDBW1 LED has a higher maximum current rating than the UPLED, LEDD1B, DC4100, and DC4101 drivers are able to provide, which will limit the achievable LED output power when used with these drivers. In addition, the DC2200, DC4100, DC4104, DC40, and UPLED drivers are capable of reading the current limit from the EEPROM chip of the connected LED and automatically adjusting the maximum current setting to protect the LED.

2-Pack Directional Flush Mount Spot Light Dimmable Ceiling Spotlight Indoor LED Spot Lights Adjustable Wall Spotlight Focus Light Accent Light Fixture for ...

White Light LEDsThis illuminator is a cold white LED featuring a broad spectrum that spans several hundred nanometers; see the table to the right for a typical output spectrum. It has a correlated color temperature of 6500 K, which indicates that the color appearance is similar to a black body radiator at the same temperature. In general, a cold white LED has a stronger blue component to the spectrum than a warm white or neutral white LED. Compared to warm white LEDs, cold white LEDs are more suitable for fluorescence microscopy applications or use with cameras with white balancing due to their higher intensity at most wavelengths. To discuss LED backlights with other correlated color temperatures or nominal wavelengths, please contact Tech Support.

This tab includes all LEDs sold by Thorlabs. Click on More [+] to view all available wavelengths for each type of LED pictured below.

Capitallighting

This LED backlight features an EEPROM chip which stores information about the LED (e.g., current limit, forward voltage). When controlled by a Thorlabs DC2200, DC4100, DC4104, UPLED, or DC40 LED driver, the data can be used to implement smart safety features.

Thorlabs also offers a range of unmounted, mounted, collimated, and fiber-coupled LEDs that are designed for a variety of applications, including microscopy, illumination, and measurements. For questions on choosing an appropriate LED and to discuss mounting requirements, please contact Tech Support.