Each cartridge will fire only once. If you have a second cartridge, you can reload quickly and fire again, or you can continue to use your TASER on contact as an ordinary stun gun. To use your TASER as an ordinary stun gun you must hold it hard against the body, preferrably against the skin and continue to hold it there as you activate the trigger. You can do this to defend yourself against a second attacker even without removing the spent cartridge. If the first attacker is still be connected to your TASER by the wires, they will also be affected by the EMD current.

One fundamental rule in most jurisdictions is that at a stop sign-controlled intersection, vehicles must come to a complete halt. This allows drivers to assess the situation and determine the appropriate course of action before proceeding. However, some exceptions may exist, such as situations where certain designated vehicles are allowed to proceed without stopping, like emergency vehicles or public transportation.

All TASER X26, X26E, X26C, X2, TASER CAM, M26, M18, C2, PULSE and BOLT Operating Manuals are at the bottom of the page

Use your TASER only in self defense. Do not "test" it on someone else. In 2009 an Air Force study found that repeated shocks from a TASER stun gun led to heart damage in pigs. Specifically, the study examined the pigs' blood and found a jump in the enzyme Troponin T. It also found the pigs suffering high levels of blood acid, a potentially life threatening condition called acidosis. It should be noted the pigs in this study were shocked 18 times, when most people are hit once, and none of the pigs died. Between 1999 and 2009, there have been 86 deaths connected to the TASER and one-third of the deaths came from some kind of heart failure. The manufacturer, TASER International has never been blamed as the leading cause. TASER International released a statement calling the Air Force's 18 shocks "extreme" and claiming the blood tests are similar to what "would be expected (from) strong physical exertion." TASER International also notes that the Air Force's researcher called his discovery of the Troponin T heart enzyme statistically insignificant, and has always said multiple TASER shocks make no difference. Now there is some evidence that multiple shocks may cause damage. The American Academy of Emergency Medicine (AAEM) advises a maximum exposure to conductive electronic weapons (CEW) of no more than 15 seconds per 24 hours.

Inspect the safety mechanism and the trigger mechanism. On the AIR TASER and TASER C2 the safety mechanism is on the top, and the trigger is a button also located on the top. On all the TASER M18, M26 and X26 models the safety is a lever on both sides with a conventional trigger. For that reason the M18, M26 and X26 models are very instinctive and easy to use. If your TASER is equipped with a lasersight, the lasersight turns on when you activate the safety. The lasersight is an effective deterrent. Aim the lasersight high on the body. The first probe (barbed projectile) and wire will strike there. The second probe will land a few inches below.

Furthermore, lane discipline plays a crucial role in maintaining order at intersections. Drivers must follow lane markings and choose the appropriate lane for their intended turn well in advance of reaching the intersection. By doing so, they facilitate smooth traffic flow and minimize confusion or last-minute maneuvers that can lead to accidents.

The Joint Committee on Uniform Traffic Control Devices (MUTCD) played a critical role in shaping the development and standardization of stop signs. Formed in 1935, this committee aimed to establish uniform specifications for various traffic control devices, including stop signs. Their efforts ensured that key aspects such as size, color, and design were consistent across different jurisdictions.

These instructions are provided to meet the California State law requirement of providing an "Instruction Booklet" and Pennsylvania state law requiring "clearly written instructions as to its use and the damages involved in its use" and to meet all other state and local laws requiring instruction and other information.

Call for more information about the TASER® X26 or about Accredited Security Sales and Service. We work long hours, just as our customers do, and we answer the phones seven days a week.

Moreover, the placement of stop signs at strategic locations helps mitigate specific risks associated with intersections. For instance, busy areas with high pedestrian activity require extra caution from drivers. The presence of stop signs ensures that motorists are compelled to halt completely, providing pedestrians ample time and space to safely cross the road. This simple measure can make a significant difference in preventing accidents involving vulnerable road users.

TASER officials say lowering of a TASER from the chest will incapacitate someone more effectively. The bulletin notes police can still shoot a suspect's chest if there isn't a better option. Police are also trained to aim away the face, head and groin. Officers were originally taught to aim for "center mass." The chest and the back are the two largest target areas you have to aim for, so encouraging officers to avoid shooting at the chest is a departure from what most officers were originally trained to aim for.

It is clear that stop signs have a crucial role in promoting road safety at intersections. They communicate expectations to drivers, establish right-of-way principles, reduce speed, enhance pedestrian safety, and create order on our roads. By following these simple instructions and coming to a complete stop when required, drivers contribute significantly to maintaining a safer driving environment for themselves and other road users. The importance of stop signs cannot be overstated in preserving lives and preventing accidents at intersections.

Over time, significant milestones and standards were established to guide the implementation and usage of stop signs across different regions.

Intersections form the heart of traffic flow, making it essential to establish clear rules and guidelines to maintain road safety. These regulations help ensure that drivers understand their responsibilities when approaching, navigating, and departing from intersections.

At its core, a stop sign functions as a traffic control device designed to regulate the flow of vehicles and prioritize safety. It serves as a communication tool between drivers, conveying the message that they must yield the right-of-way and ensure intersection safety before continuing their journey. The distinct shape, color, and markings of the stop sign create instant recognition, allowing drivers to anticipate and react accordingly.

Consider driving through different countries around the world - from the familiar red octagon in the United States to the inverted solid red triangle used in Japan. These variations reflect the influence of local perspectives, cultures, and road regulations while adhering to international standards.These noteworthy milestones and standards continue to shape the development and effectiveness of stop signs as vital tools for ensuring road safety at intersections. By providing clear instructions for drivers to come to a complete stop, these signs contribute to reducing accidents and promoting orderly traffic flow.

Ensuring the visibility and proper placement of stop signs is crucial to promote road safety at intersections. Why is this important? Well, stop signs serve as a visual cue for drivers to come to a complete halt before proceeding, allowing for safe interaction with other vehicles or pedestrians. However, if these signs are not clearly visible or strategically placed, their effectiveness in preventing accidents diminishes significantly.

Stop signs are a crucial element of traffic control, playing a vital role in ensuring road safety at intersections. To fully appreciate their significance, it is essential to understand the design principles behind these recognizable signs. The primary purpose of a stop sign is simple – to notify drivers to come to a complete stop and ensure intersection safety before continuing past the sign. As such, the design elements are carefully chosen to maximize visibility and convey a clear message to drivers.

Another critical aspect of the role played by stop signs is in reducing speed and promoting compliance with traffic rules. When drivers encounter a stop sign ahead, they instinctively slow down in preparation for coming to a complete stop. This controlled deceleration gives them a chance to assess the safety of proceeding through the intersection, allowing for better decision-making and potentially preventing collisions.

The adoption and standardization of stop signs progressed further when the American Association of State Highway Officials (AASHO) took steps to establish uniformity in traffic control devices. In 1922, AASHO selected the distinctive octagonal shape for stop signs. This shape was chosen primarily to enable better identification at night and prevent confusion with other traffic signs.

Some people might argue that these variations in shapes and colors could potentially lead to confusion among drivers traveling across different regions. While this concern is valid, it is essential to remember that traffic control devices are designed primarily with local regulations in mind. Drivers are expected to familiarize themselves with the rules and signage requirements of each region they encounter. Additionally, standardized symbols like "STOP" are often included across different designs to ensure universal recognition.

Another important aspect of stop sign design is color choice, which further enhances visibility and recognition. Typically, stop signs sport a vibrant red color that instantly grabs attention on the road. This bold hue serves as a universal visual cue, indicating the need for immediate action – stopping. Additionally, the red color provides a stark contrast against various backgrounds, ensuring that stop signs stand out prominently in different environments and lighting conditions.

Improved visibility and precise placement contribute greatly to reducing confusion among motorists approaching intersections. When combined with clear pavement markings and appropriate warning signs, drivers can be better informed about potential hazards ahead. This level of clarity facilitates smooth traffic flow while minimizing the risk of accidents caused by unexpected movements or misinterpretations.

Stop signs, as we know them today, have evolved over time in response to increasing traffic congestion and the need for standardized road regulations. The first-ever stop sign was created in 1914 by Detroit police sergeant Harold "Harry" Jackson. Recognizing the chaotic flow of traffic at a busy intersection, Jackson implemented a rectangular sign with the word STOP to improve traffic control. This simple yet effective solution laid the foundation for the development of stop signs worldwide.

Now that we understand the basics of stop sign design let's explore common shapes and colors used in different regions around the world.

In terms of colors, some countries may employ slightly different hues or combinations depending on their specific traffic control conventions. However, the purpose remains consistent – to command attention and elicit an immediate response from drivers.

The purpose of a stop sign is to notify drivers to come to a complete stop at an intersection before proceeding further. It ensures intersection safety by providing a clear indication of right-of-way and allowing drivers to assess traffic conditions before continuing. Regardless of personal opinions, following the rule and coming to a complete stop is important for traffic flow and road safety. Stop signs are not exclusive to roadways either, but can be present in my environments such as airports and warehouses.

When firing your TASER hold your TASER upright. The top probe and wire will land where you aim as indicated by the lasersight (if your TASER is equipped with one), and the second probe and wire will land a few inches below. Both probes must hit the subject in order to work. The probes are effective even through clothing an inch thick. Always make sure you are no more than 15 feet away from your subject. However, this is a close range weapon. It is best to be no more than 10 feet away from the subject because the further away you are, the further apart the probes will hit. Even law enforcement officers equipped with 21' and 25' cartridges are trained to fire at a range of no more than 10 feet whenever possible.

For example, in Europe, where forty countries are party to the Vienna Convention, stop signs typically follow the red octagonal design. However, there may be slight variations in terms of the size of the sign or the specific shade of red used.

One of the key aspects of stop sign design is the shape. In most countries, including the United States, the conventional shape is an octagon, featuring eight sides. This distinctive shape allows for quick identification from a distance and helps prevent confusion with other types of traffic signs. The use of an octagon was standardized by the American Association of State Highway Officials (AASHO) in 1922 to improve nighttime visibility and promote consistency in traffic control devices.

The range is not determined by the weapon itself, but rather by the cartridge. The yellow-tipped civilian air cartridges have a 15-foot range, while law enforcement officers have access to cartridges with ranges of 21' (gray) and 25' (green) in range. Finally, the X26 LE model records time and date for each deployment. This feature helps protect law enforcement agencies from claims of excessive use-of-force, and also provides management a powerful tool to track usage patterns and prevent misuse. The firing data on the X26C is not recorded, and cannot be downloaded.

What differentiates the X26 law enforcement (LE) version from the civilian X26C version of the TASER is the duration of the electrical discharge. Officers are expected and trained to take criminals into custody. Therefore the LE current discharge lasts only 5 seconds as that is approximately the time it takes for a law enforcement officer to handcuff and arrest a subject. The civilian X26C version of the TASER provides 10 seconds of current, and the trigger on the X26C can be pulled twice more to create a 30-second cycle. When used in self defense, you can set the TASER down and flee to a position of safety where you can call your local law enforcement agency. If you utilize your civilian TASER in self defense, and it is either left at the scene or taken as evidence by the police, you can provide a copy of the police report to the manufacturer documenting your loss. Depending on the circumstances and their policy at the time, they may replace your TASER free of charge.

Consider an example where a driver approaches an intersection only to realize that the stop sign is concealed behind overgrown vegetation or obstructed by other objects. In such scenarios, the driver may unintentionally fail to acknowledge the presence of the sign, leading to dangerous situations where they inadvertently ignore the requirement to stop, endangering other drivers or pedestrians.

Now that we have explored the significance of visibility and placement in enhancing stop sign effectiveness, let's delve into the essential rules and guidelines that govern intersections.

The bulletin states that the risk of someone going into cardiac arrest when a TASER is deployed on them is low, but notes people's reactions can't be predicted, particularly when other underlying medical conditions or drugs are added to the equation. "We have not stated that TASER causes [cardiac] events in this bulletin, only that the refined target zones avoid any potential controversy on this topic," Steve Tuttle, vice president of communications for TASER, said in a prepared statement.

Avoid targeting the face, head, groin and the frontal chest area near the heart. The manufacturer's warning in its training materials states: "When possible, avoid targeting the frontal chest area near the heart to reduce the risk of potential serious injury or death. "Serious complications could also arise in those with impaired heart function or in those with an implanted cardiac pacemaker or defibrillator." Firing at the back is the preferred option where practical.

In a way, stop signs can be seen as the traffic equivalent of manners and social etiquette. Just as society relies on established norms to function smoothly, our roads also need well-defined rules to ensure the safety and well-being of everyone using them.

To address this issue, traffic authorities prioritize visibility by implementing specific guidelines. These guidelines typically dictate factors such as the height and size of signs, font legibility, reflective properties for nighttime visibility, and placement strategies. The aim is to make stop signs easily noticeable from a reasonable distance, ensuring that drivers have ample time to perceive and respond accordingly.

While many countries adhere to the standard octagonal shape and red color for stop signs, there can be variations in certain regions. For instance, Japan uses an inverted solid red triangle instead of an octagon. This unique shape still conveys the message effectively and conforms to their local regulations.

TASER Operating Manuals TASER X26 / X26E Operating Manual TASER X26C Civilian Operating Manual TASER X26 TASER CAM Operating Manual TASER M26 Operating Manual TASER M26C Civilian Operating Manual TASER BOLT / C2 Civilian Operating Manual TASER PULSE Civilian Operating Manual TASER X2 Operating Manual TASER Cartridge Cover Removal

One notable milestone came in 1948 when the MUTCD specified the use of retro-reflective materials for signs, including stop signs. This innovation significantly enhanced visibility at night or in adverse weather conditions, promoting safer intersections and reducing accidents related to poor signage recognition.

It's worth noting that the Vienna Convention on Road Signs and Signals allows for variations in stop sign design. Besides the red octagon, it permits a red circle with a red inverted triangle and either a white or yellow background, accompanied by a black or dark blue "STOP" legend. This flexibility ensures that stop signs can be tailored to suit different cultural and regional contexts while maintaining their core function.

In addition to stopping, several other guidelines govern intersections. For instance, right-of-way principles usually dictate which vehicle has priority when multiple drivers arrive at an intersection simultaneously. Generally, this gives precedence to the driver on the right or prioritizes specific turning movements over others.

The Scottsdale, Arizona-based manufacturer of the 50,000-volt stun guns used by departments across the country suggests police should avoid shooting suspects in the chest. TASER International Vice President of Training Rick Guilbault said in an October 12, 2012 bulletin the decision was based on best practices research and will help police avoid lawsuits from those who claim the devices cause injuries and other health problems.

Accredited Security is a Division of Accredited Financial Services, a Nevada Corporation. Accredited Financial Services has been a Member of the Southern Nevada Better Business Bureau since 2006. TASER® is a registered trademark of Axon Enterprise, Inc. Accredited Security is not affiliated with Axon, and Axon does not sponsor or endorse Accredited Security or any of its products or services. Any use of the TASER® mark is for identification purposes only. *Axon does not offer or honor any warranty* on used TASER® energy weapons purchased through Accredited Security. **Axon has discontinued the X26 energy weapon and does not offer a firmware update beyond 2014. ***An energy weapon’s internal electronics are sonically sealed by the manufacturer and cannot be refurbished***. Because these components wear out over time, which may increase the risk of failure in the field, Axon does not recommend use beyond their 5-year useful life. Accredited Security does not offer a warranty* on TASER CEWs through Axon, nor is warranty* on a purchased and refurbished*** TASER CEW offered or honored by Axon. Accredited Security is not affiliated with the manufacturer Axon. Accredited Security™ is a Trademark of Accredited Financial Services, LLC.

TASER® weapons fire very accurately from a safe distance of several feet away with the use of barbed projectiles (probes) connected by insulated wire to the TASER. Unlike ordinary stun guns, all TASER weapons utilize Electro-Muscular Disruption (EMD) stopping power that incapacitates by subjecting the body to a patented series of rapid pulses of electrical current that are specifically timed to interrupt the human electro-muscular system. The subject loses mobility through the inability to control their arms and legs, and fall to the ground. Although they maintain consciousness, they become disoriented and usually remain immobile for some time afterward. TASER X26E Operating Manual - HTML TASER X26E Operating Manual - PDF

The TASER X26C was modeled after the law enforcement TASER X26, and utilizes the same proven technology. One trigger pull of the X26C initiates a 10-second cycle, while the LE law enforcement model runs for 5 seconds. Moreover, the trigger on the X26C can be pulled several times to create a 30-second cycle. The user can then deploy the X26C, quickly squeeze the trigger 2 additional times to create a 30-second cycle (3 pulls x 10 seconds = 30 seconds), place the X26C on the ground, and depart the scene - while the X26C safely disables the assailant. The law enforcement version cannot be triggered multiple times to create back-to-back cycles. However the LE version can function again for 5 seconds by pulling the trigger again immediately after. Cycle times on both models may be interrupted by placing the safety lever in the "safe" position. Per second, the LE X26 delivers 19 pulses of electricity into the target. Since the X26C is capable of delivering a much longer cycle, these pulses range from 19 per second for the first 5 seconds, then drop down to 10 pulses per second for any remaining time.

Some may argue that simply having sufficient signage is enough without needing to consider intricate placement details. However, it's important to recognize that accurate placement enhances both awareness and anticipation of stopping requirements. When stop signs are properly positioned before an intersection, drivers are more likely to anticipate upcoming actions required for safe navigation.

Accredited Security is a Division of Accredited Financial Services, a Nevada Corporation. Accredited Financial Services has been a Member of the Southern Nevada Better Business Bureau since 2006. TASER® is a Trademark of the Manufacturer Axon formerly known as TASER International, Inc. Accredited Security does not offer a warranty* on TASER CEWs through TASER International, Inc., nor is warranty* on a purchased and refurbished*** TASER CEW offered or honored by TASER International, Inc. Accredited Security is not affiliated with the manufacturer TASER International, Inc. Accredited Safety™, Accredited Security™, MisterStungun® and MrStungun® are Trademarks of Accredited Financial Services, LLC.

Batteries are provided. The TASER X26 uses a DPM or XDPM lithium battery which have a 10-yr shelf life. They are good for about 200 five second firings and last for about three years or more in the weapon. Replace them after about three years or when the power level display drops to 10%. Do not remove the battery for an extended period of time because the TASER X26 will lose it's programming and an error code will display the next time a battery is inserted. Do not remove the battery until you need to replace it. Watch the display when you do. Do not remove the battery when a 'P' is displayed. Doing so will disable the TASER X26 and render it irrepairable. Use your TASER only in self defense. Do not "test" it on someone else. In 2009 an Air Force study found that repeated shocks from a TASER stun gun led to heart damage in pigs. Specifically, the study examined the pigs' blood and found a jump in the enzyme Troponin T. It also found the pigs suffering high levels of blood acid, a potentially life threatening condition called acidosis. It should be noted the pigs in this study were shocked 18 times, when most people are hit once, and none of the pigs died. Between 1999 and 2009, there have been 86 deaths connected to the TASER and one-third of the deaths came from some kind of heart failure. The manufacturer, TASER International has never been blamed as the leading cause. TASER International released a statement calling the Air Force's 18 shocks "extreme" and claiming the blood tests are similar to what "would be expected (from) strong physical exertion." TASER International also notes that the Air Force's researcher called his discovery of the Troponin T heart enzyme statistically insignificant, and has always said multiple TASER shocks make no difference. Now there is some evidence that multiple shocks may cause damage. The American Academy of Emergency Medicine (AAEM) advises a maximum exposure to conductive electronic weapons (CEW) of no more than 15 seconds per 24 hours. Inspect the safety mechanism and the trigger mechanism. On the AIR TASER and TASER C2 the safety mechanism is on the top, and the trigger is a button also located on the top. On all the TASER M18, M26 and X26 models the safety is a lever on both sides with a conventional trigger. For that reason the M18, M26 and X26 models are very instinctive and easy to use. If your TASER is equipped with a lasersight, the lasersight turns on when you activate the safety. The lasersight is an effective deterrent. Aim the lasersight high on the body. The first probe (barbed projectile) and wire will strike there. The second probe will land a few inches below. The batteries are located in the handgrip of the M18 and M26. If you fail to see a spark or the spark is weak, replace the batteries. Use a ballpoint pen to remove the cover and then slide out the battery holder. Make sure the contacts are clean and replace them with 8 (EIGHT) DuraCell® CopperTop™ brand AA alkaline batteries. Make sure all the batteries are facing the correct way, and carefully slide the battery holder into the handgrip so the contacts match up properly. The AIR TASER takes a 9 Volt alkaline battery in the handle. Make sure to install it with the positive (+) side up. The TASER X26, TASER X26P, TASER X2, TASER C2, TASER BOLT, and TASER PULSE models use proprietary Power Magazines which you can purchase from us. Fully depress the button in the side of the hand grip to remove the battery. Batteries typically last three years or more before they need replacing.

Stop signs play a vital role in ensuring road safety, particularly at intersections. These iconic red octagonal signs act as powerful visual reminders for drivers to come to a complete stop before proceeding further. By establishing clear rules and expectations, stop signs contribute significantly to reducing the risk of accidents and creating a safer driving environment.

Understanding and adhering to these intersection rules and guidelines helps create order on the roads and ensures everyone's safety. Failure to comply with these regulations not only puts oneself at risk but also endangers the lives of other drivers and pedestrians sharing the road.

Never test your TASER by firing at another individual regardless of whether they give you permission. Use your TASER only for self defense. Avoid targeting the face, head, groin and the frontal chest area near the heart whenever possible to reduce the risk of potential serious injury or death. If you have an extra cartridge you wish to use for practice, you can attach a three foot length of aluminum foil onto a wall and fire at that.

Internationally, the adoption of standardized stop sign designs was facilitated through the Vienna Convention on Road Signs and Signals. This convention, established in 1968, aimed to harmonize traffic signs across countries and continents. Over forty European countries are party to this convention, ensuring consistency in stop sign design and placement.