Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

field ofview乐队

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

Definefield of viewin biology

The term field of view is not only used for that field itself, but also for its magnitude. In some cases, for example for telecentric lenses, it is used for the viewed area on the object plane.

In some cases, the term angle of acceptance is used instead of field of view – particularly for non-imaging optical instruments.

Field of viewsynonym

Standard photographic objectives are made such that their field of view is similar to that of the human eye – with a full horizontal angle around 50°, when considering the range with reasonable sharp imaging.

The field of view of the eye may be restricted by various kinds of devices, for example by correction glasses of small size or by magnifying glasses. In some cases, the peripheral view is completely blocked, e.g. with some laser safety glasses; that can introduce additional hazards, e.g. of bumping into items which could not be seen.

Apri un sito e guadagna con Altervista - Disclaimer - Segnala abuso - Privacy Policy - Personalizza tracciamento pubblicitario

field ofview中文

The field of view gets particularly small when using a tele-objective, while wide field objectives are by definition made for a large field of view. Extreme versions are called fish-eye objectives; they produce substantial image distortions, which are hardly avoidable in that regime.

Field of viewdefinition microscope

For small angles, the full-angle field of view in radians is approximately the sensor diameter divided by the focal length; for obtaining a value in degrees, one has to multiply that with <$180\textdegree / \pi$>. For wide angle cameras, one has to use a more accurate formula:

Note: this box searches only for keywords in the titles of articles, and for acronyms. For full-text searches on the whole website, use our search page.

The field of view of a photo camera depends on both the used photographic objective and the size of the photographic film or the image sensor. This is explained in Figure 1, which shows the optical configuration is a greatly simplified way: the objective is represented by a single lens, although it is usually a system containing multiple lenses. One can simply consider rays coming from object points and going through the center of the lens, where no ray deflection occurs.

Field of viewhuman eye

Field of view

As mentioned above, the field of view of an instrument is often intentionally limited. This is often not motivated by its application, but rather because the image quality would be too much degraded by optical aberrations when permitting a larger field of view. Advanced optical designs, e.g. based on aspheric lenses or more refined combinations of lenses, can offer a wider field of view with good image quality. However, they are not always employed, e.g. for reasons of higher cost, size or weight of the instruments.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.

Note: the article keyword search field and some other of the site's functionality would require Javascript, which however is turned off in your browser.

Field of viewsimple definition

A large field of view is particularly relevant, for example, for astronomical telescopes which are used in stellar surveys.

The field of view of a telescope or a photo camera, for example, is usually understood as the range of angular directions in which objects can be observed for a fixed orientation of the instrument. (One may of course observe a wider range by combining images from different instrument orientations.) It can be quantified in different ways:

Telescopes provide some magnification for viewing distant objects. The higher the magnification, the smaller is typically the field of view. However, there are optical designs which provide a larger field of view for given magnification. For example, a simple Keplerian telescope has a small field of view, which can be expanded by inserting an additional field lens.

The field of view of the human eye is also not precisely defined. Maximum image resolution is only achieved in the central area, and the peripheral regions exhibit a substantially lower image quality. This is largely compensated by rapid eye movements for covering a wider angular range and accurately viewing objects of particular interest.

The field of view of an optical imaging instrument is often limited by an intentionally created field stop. This is an optical aperture, e.g. in the form of a diaphragm, which is placed in an image plane or close to such a plane, such that the edges of the field of view are sharply defined. However, in some cases one obtains vignetting effects, i.e., a gradual decrease of image brightness towards the edges of the field of view. This happens when the field of view is limited by an aperture which is not in an image plane. An example for that situation can be found in the article on field lenses, where we vignetting in an optical telescope is explained. In cases with vignetting, one may define different values for the field of view – for example, the field without any vignetting, the field up to the point of half-vignetting or (is the very maximum) up to the point where the intensity vanishes.

Enter input values with units, where appropriate. After you have modified some inputs, click the “calc” button to recalculate the output.