Once you’ve got your batteries it’s time to open the battery covers on the Quest 2 controllers so that you can remove the old AA batteries and replace them with new ones. Since there’s no latch or indentation in the controller it’s not immediately obvious how to do this, so we’ll go through it step by step.

Now that the battery compartment is empty get your new battery and determine the positive and negative ends. The positive end will have a little nub on top, there should also be + and - signs on each side that show which end is positive and negative.

Leave the cover somewhere you won’t lose it for now. It’s time to remove the old battery and replace it. This can also be a little tricky and stiff the first couple of times, but once you get used to this it will be easy. As you can see in the little battery diagram inside the battery compartment, the positive end of the battery is the end that is pointing to the bottom of the controller grip. The negative end is pointed towards the ring.

WASHINGTON (FOX5 DC) – D.C.’s fire chief has known for at least a year that dashboard cameras on many of the department’s engines, trucks and ambulances do not work. It is an issue that came to light after one of the fire department’s engines was involved in a deadly crash earlier this month and the dash camera onboard the vehicle did not record the collision.

Unlike the Quest 2 headset itself or the Meta Quest Pro controllers, the Quest 2 touch controllers don’t have an internal battery or integrated battery that can be charged with a usb-c cable. Hopefully a built-in rechargeable battery will be included in future Quest models.

Last week, the fire department said in a news release that having working cameras on all of the units has been “unintentionally uneven” over the years. On Monday, Dabney Hudson, the president of the District’s firefighter’s union, said he knows Chief Dean knew about this issue because he talked to him about it.

OculusQuest 2controller batterycover stuck

On March 9, a camera facing forward on Engine 26 should have recorded what happened when the fire truck collided with a vehicle at the intersection of Rhode Island Avenue and 12th Street in Northeast D.C. that killed 31-year-old DeAngelo Green, the driver of the car.

Here I’ll show you all of the Metro Awakening weapons including the order you find them in, how they function, and what each is good at.

Best batteries forOculusQuest 2 controllers

Once the covers are removed make sure to dispose of the old batteries. Googling “nearby battery recycling” can show you some potential locations to dispose of old AA batteries.

One camera on Engine 7 on Monday lying on the dashboard not mounted properly, according to the firefighter’s union. However, another one found on Rescue Squad 2 was positioned and mounted the way it was designed.

If you have fragile nails or simply don’t want to use them to remove the battery, get a thin tool like a pair of tweezers or thin spatula. You’ll either need to use that or one of your fingernails to remove the battery from the compartment.

First locate where the cover is. That will be on the outer side of the grip of the controller, the side that does not have the grip button and is completely smooth. If you haven’t removed the stickers indicating which hand to hold the controller in, that will be the side with the “L” or “R” sticker.

“Similar reaction to everything — he has no good answer, he has no reason for it,” said Hudson. “We had a discipline hearing not too long ago where two fire trucks collided and they couldn’t get the cameras from either one of those. I brought this to his attention. It was unconscionable then and this was before the incident with Engine 26.”

When the battery level of your Oculus Quest 2 controllers gets low you’ll need to change the batteries. If you want to know the best way to change your Oculus Quest 2 controller batteries and replace them, then here’s how. After all, you can’t enjoy Virtual Reality with no Oculus Controller battery power.

OculusQuestcontroller batteryreplacement

Once you’ve located the cover, hold the controller in both hands and gently press your thumbs down in the center of the compartment. Then push the cover out towards the bottom of the controller. The goal here is to push the cover slightly inwards and outwards, unlatching it and also moving it away so that you can place in your new AA battery. This can be a little tricky your first few times doing it, and new quest controllers can be a little more stiff and difficult, but keep at it and you’ll get it.

Once the new battery is inside, push the battery cover back down over the compartment. When you start up your Meta Quest 2 again, you will see the battery life percentage of your controllers update to reflect the charge of the new battery. It is recommended that you change the batteries of both controllers at the same time.

The short version of how to replace your Oculus Quest 2 controller batteries is this: Remove the battery cover on your Quest controller. It’s on the grip of it on the side that doesn’t have the grip button. Then take out the old battery, dispose of it or recharge it, and replace it with a replacement battery before slipping the battery compartment cover back on. For a longer explanation with details and pictures, keep reading this article.

It is also very easy to just use rechargeable batteries, like those found here on amazon. If there are four then you can just recharge the two old ones using the battery charger after replacing them with two new batteries. This means you don’t have to constantly buy new AA batteries and throw out old ones. It’s also good to reduce your environmental impact, and is just an overall win-win.

Changing battery on oculus controllerquest 3

At the top of the battery compartment cover you’ll also see a little downwards arrow indented into the plastic, right below the ring at the top of the controller. This small eject icon shows you the direction to push to unlatch the battery cover. It can be hard to see, but easier to feel with one of your fingers.

ReplacebatteryinOculusQuest 2 headset

Multiple sources within the fire department said D.C. Fire and EMS Chief Gregory Dean and his deputies knew about issues with the cameras. However, for whatever reason, they did do anything about it until this past January when a contractor was hired to take a close look at the program.

“It’s important to have those so that any incident you have — you have recorded data on it,” said Hudson. “These things have been used in other situations — building collapses — things like that. If there is a trigger for that incident, we have been able to go back and investigate scenes. It’s not just auto accidents that they are involved in. They have been used in other places like shootings. The guys can hit the panic button, which is on there for that reason and you can get recorded video. We are there believing that they work and not to have that, it does a disservice to everybody.”

How to openOculus controller battery

First you’ll want to grab a couple of single AA batteries. The Meta Quest 2 controllers take alkaline batteries, disposable or rechargeable. Luckily the alkaline battery is the kind most commonly used in all sorts of appliances, and is what you’d call a typical AA battery.

To remove the battery wedge one of your nails between the top of the battery on the positive end (or a thin tool that can fit in the gap). Then press down on the battery so that the top part of it comes away from the inside of the compartment. This will give you room to pull the battery towards you and out of the controller.

Grab a single AA battery, making sure the positive end is up, and slip the negative end into the bottom of the compartment (when the grip is pointed upwards as in these pictures). You can push down on the battery so that you have room to slip in the positive end facing upwards. If you’re still confused on which way the ends should go, there is a little diagram inside of the battery compartment which shows which way the positive end of the battery should go.

Changing battery on oculus controllerquest 2

If you want to know more about the story in Metro Awakening: VR then here I’ll give you a quick spoiler free intro here at the start, and then delve into the full explanation of the Metro Awakening story afterwards.

How to openOculusQuest 2controller battery

If you use your Oculus Quest 2 a lot then you might want to consider getting some rechargeable AA batteries that come with battery chargers, so that you won’t have to throw away old disposable batteries and constantly have to buy more. It’s a good idea to keep your controller battery life from ruining your best Quest 2 experience.

Hey VR gamers and Metro lovers. Here's a few ways you can increase your success and enjoyment of Metro Awakening aka Metro VR aka finally another quality Virtual Reality shooter that isn't another sandbox or procedurally generated roguelike.

If you’re still experiencing power issues with your Oculus Quest controllers like the battery percentage not updating, or the controllers still showing as being low power even with new batteries, then you should contact the Meta support team and possibly get replacement controllers.

There are a ton of fantastic weapons to find and use in Metro Awakening: VR, and they’re pretty unique as far as Virtual Reality shooter weapons go. Despite Metro VR having about a fifth as many weapon options as any flatscreen Metro title, there are still some very fun guns and other gadgets to use in the game.