Each preamplifier is equipped with a front-panel FILTER switch to enable or disable a 6 dB/octave low-cut filter with a -3 dB cutoff at 80 Hz. Two additional switches on each input select 24 V or 48 V phantom if the master PHANTOM power selector is ON. The INPUT PAD switch allows the operator to attenuate the input signal by 15 dB prior to the preamplifier input stage, increasing the maximum input level from +5 dBu (attenuator out) to greater than +20 dBu. A POLARITY switch provides signal polarity reversal if needed. The GAIN control provides continuous adjustment between 20 dB and 60 dB. An RDL Dual-LED VU meter is provided adjacent to each gain control. The meters are calibrated to indicate +4 dBu at the associated balanced output. A separate CLIP LED flashes if a signal peak is within 3 dB of clipping. The trigger threshold of the CLIP LED is 17 dB above a normal +4 dBu output.

Lasergrid projectorfor hanging pictures

The E-Series provides benchtop, multi-sensor measurement solutions with high-resolution optics and advanced video detection, allowing fast, versatile and accurate part measurements.

Add more measurement functionality to your machine with additional sensors, increasing your inspection potential with probes, lasers and rotaries.

LEDgrid projector

Measure a broad range of parts with this range of fully-automatic 3-axis dimensional measurement systems, offering multi-sensor, non-contact video measurement capabilities.

The Grid Projector works by projecting a grid pattern onto the surface of the part from behind the front objective lens using an LED source. The system is designed so that the image of the grid will only appear in focus when the surface of the part is exactly coincident with the focal plane of the optics.

Lasergrid projectorfor bike

Designed for optimum scanning probe performance, the SP range combines a wide-field objective lens, digital zoom, and five megapixel monochrome digital camera to ensure accurate imaging at all zoom levels.

Lasergridpattern generator

Discover the measurement software you need to control, monitor, display and report on every aspect of the measuring process. Discover the full capabilities of ZONE3 and the power of Prolink SPC software today.

A high performance, fixed optical range of measurement systems that are engineered for critical dimensional measurements and optimal accuracy for a broad range of parts.

A new generation of multi-sensor coordinate measuring machines, FlexPoint offers a unique combination of sensors, and CAD-based programming, to solve a wide variety of dimensional measurement problems.

The multi-sensor measurement range that integrates superior optical performance into your manufacturing processes by delivering the highest standard of accuracy, speed and repeatability.

Laser pointergridpattern

Lasergrid projectorAmazon

Designed to measure small, intricate parts directly on the shopfloor, in the lab or as part of an automated work cell. The SNAP range is easy to implement into any manufacturing setting.

Each preamplifier provides three balanced line-level output formats: XLR male, detachable terminal block and ¼” TRS. A separate summing amplifier provides a combined mono output on a line-level detachable terminal block. Balanced outputs may be wired unbalanced. The rear panel also provides a detachable terminal block and a power input jack to connect 24 Vdc power.

Many surfaces (such as glass, clear plastic, and mirror-like finishes) create images with extremely low, or worse, nonexistent contrast. A Grid Projector accessory from OGP measures these surfaces.

Book a free demo at our Advanced Innovation Centre where you can see the Feather Probe in action to witness how it can be incorporated into measurement routines.

Lasergrid projectorfor tile

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

Lasergridlevel

The all-in-one multi-sensor measurement system, built to handle a wide variety of measurement requirements. The CNC range is the best choice for automatic, general purpose, multi-sensor coordinate measuring.

The ZIP range provides superior optical performance and a range of machine travels to deliver reliable performance, with multiple light sources illuminating the toughest measurement challenges.

The HR-MP2 is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.

The HR-MP2 offers exceptional input headroom, wide flat frequency response and extremely low noise with very high common-mode signal rejection. Total harmonic distortion and crosstalk are below the noise floor, allowing the HR-MP2 to be operated as a stereo preamplifier or as two separate mono preamplifiers.

The autofocus routine can then use the contrast contained in the grid image just as if it were present in the surface of the part and since the autofocus algorithm is finely tuned to the characteristics of the grid image, repeatability is significantly improved.

Laser scanning systems that deliver fast, accurate and automated 3D measurements, ideal for measuring complex shapes such as moulded plastics, castings, stampings and machined parts.

Fusion systems are innovative, high-speed, 3D multi-sensor measurement systems that combine an exceptional large field-of-view optical system with multi-sensor flexibility.