Scotchlite 3M

4. Switch to low power (10x). This may be sufficient to view your chosen organism. Try to note how it moves and do your best to draw it as you see it, unless you need more magnification.

2. Use the SCANNING (4x) objective and course focus adjustment to focus, then move the mechanical stage around to find the letter “e”. Note the orientation when viewed through the oculars.

3. Use the SCANNING (4x) objective to focus, then move the mechanical stage around to scan the slide for live microorganisms. You are looking for tiny swimming beings- they may look green or clear and might be very small. Choose one to focus on and center it in your visual field.

Reflective compoundsfor metal

Most available types of infrared reflective paint / IR reflective coating materials are easily damaged at outside exposure, by heat, ultraviolet rays, moisture, etc. They require frequent repainting to provide sufficient solar reflectance.

3MReflectiveMaterial for Clothing

2. Always start with the stage as low as possible and using scanning objective (4x). Odds are, you will be able to see something on this setting (sometimes it’s only a color). Use the coarse knob to focus: the image may be small at this magnification, but you won't be able to find it on the higher powers without this first step. Move the mechanical stage until your focused image is also centered.

1. Using the transfer pipette, transfer a drop of pond water onto a microscope slide. The best specimens usually come from the bottom and probably will contain chunks of algae or other debris that you can see with your naked eye.

3Mreflectivespray paint

A microscope is an instrument that magnifies an object so that it may be seen by the observer. Because cells are usually too small to see with the naked eye, a microscope is an essential tool in the field of biology. In addition to magnification, microscopes also provide resolution, which is the ability to distinguish two nearby objects as separate. A combination of magnification and resolution is necessary to clearly view specimens under the microscope. The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.

On air-conditioned buildings, ZEFFLE IR Coating helps reduce the energy consumption of the A/C system and improves comfort inside the building by passive cooling. Buildings heat up by absorbing the heat of the sunlight. Using ZEFFLE IR, the sunlight is reflected and the building heats up less. This passive cooling effect reduces the cooling load of the air-conditioning system and increases the comfort for people inside the building.

Lifetime cost of ZEFFLE IR Coating is significantly lower compared to conventional coatings: Its proven durability of 15 to 20 years means less frequent repainting:

3MReflectiveVinyl

This page titled 1.4: Microscopy is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Susan Burran and David DesRochers (GALILEO Open Learning Materials) via source content that was edited to the style and standards of the LibreTexts platform.

1. Place the letter “e” slide onto the mechanical stage. Be sure to note the orientation of the letter “e” as it appears to your naked eye.

5. Once you have centered and focused the image, switch to high power (40x) and refocus. Note movements and draw the organism as you see it.

The LibreTexts libraries are Powered by NICE CXone Expert and are supported by the Department of Education Open Textbook Pilot Project, the UC Davis Office of the Provost, the UC Davis Library, the California State University Affordable Learning Solutions Program, and Merlot. We also acknowledge previous National Science Foundation support under grant numbers 1246120, 1525057, and 1413739. Legal. Accessibility Statement For more information contact us at info@libretexts.org.

3MReflectiveFabric

In this lab, parts of the microscope will be reviewed. Students will learn the proper use and care of the microscope and observe samples from pond water.

3M ScotchliteReflectiveMaterial

Used on oil tanks, gas tanks, or chemical tanks, ZEFFLE IR Coating reduces evaporation, lowering costs in a vapor recovery system.

3Mreflectivepaint for shoes

In addition to the objective lenses, the ocular lens (eyepiece) has a magnification. The total magnification is determined by multiplying the magnification of the ocular and objective lenses.

ZEFFLE IR Coating maintains its exterior appearance for many years with no degradation, even when exposed to wind and rain, because of the excellent UV durability and weather resistance its fluoropolymer base provides. As the coating remains intact, it continues to protect the substrate. This saves money by reducing the frequency of maintenance work compared to less durable coatings.

2. Use the SCANNING (4x) objective and course focus adjustment to focus, then move the mechanical stage around to find the threads.

3. Once you've focused using the scanning objective, switch to the low power objective (10x). Use the coarse knob to refocus and move the mechanical stage to re-center your image. Again, if you haven't focused on this level, you will not be able to move to the next level.

ZEFFLE IR reflective paint is a combination of an extremely durable fluorinated resin and IR reflective pigments. The selected IR reflective pigments block 90% of the sun’s radiant heat. ZEFFLE IR maintains a high level of solar reflectance for longer than other coatings because it is more resistant to soiling than any other fluoropolymer paint.

Your microscope has 4 objective lenses: Scanning (4x), Low (10x), High (40x), and Oil Immersion (100x). In this lab, you will not use the oil immersion lens; it is for viewing microorganisms and requires technical instructions not covered in this procedure.

A large part of the learning process of microscopy is getting used to the orientation of images viewed through the oculars as opposed to with the naked eye. A common mistake is moving the mechanical stage the wrong way to find the specimen. This procedure is merely practice designed to make new users more comfortable with using the microscope.

This portion of the procedure is another practice to demonstrate depth perception. Many new microscope users find it difficult to conceive that the specimen on the slide is in three dimensions. As the stage is moved up and down, different threads will be in focus.