Actually, this is a process started already since the early years of this decade; the average weight of a half-liter PET bottle had already decreased by almost 50%, giving way to lightweighting.

When considering PET containers, which are the most widely used in the world of beverages, it is necessary to bear in mind the main characteristics of preform production machines, a concentration of technologies that can also form part of complete production lines, allowing the production of the bottle all the way to bottling of the drink or other food quality liquid, for example oil.

For high performance, the press unit must have a fluid closing profile, guarantee excellent cleaning, long working life and minimum maintenance costs.

Design of the preform is a fundamental phase, because a series of factors that characterise the bottle are dependent on this article:

Bestpattern projector

Based on: 96 cavity mould working at 10 seconds and with 95% efficiency: Production of preforms with a weight of 11 grams; 8,000 hours production/year; Added value of 0.003 Euro/preform; Cost of resin: 1.2 Euro/Kg.

The packaging sector is evolving all the time and the solutions to make industrial processes more efficient are constantly being refined to make production faster, more eco-sustainable and higher quality.

2020911 — 2008-10-15 11:52 Herbertweidner 1190×240× (22272 bytes) {{Information |Beschreibung = Beispiele für Kohärenzlängen |Quelle = selbst ...

In a manufacturing process the technologies that can make a difference, for example, are those optimising the injection unit, the press unit and the moulds.

2024926 — Since most telescopes have a 55mm back focal length, we are here to provide detailed instructions for all ASI cooled cameras.

Combining ecological sensitivity with the efficiency of industrial processes is what makes the difference today. It is necessary to market products that show customers the company’s commitment to safeguarding the climate, while still maintaining quality and communication standards.

This does not mean giving up the quality of the PET bottles, on the contrary, thanks to increasingly advanced technology, the strength of the packaging is guaranteed even when the thickness is less.

For an ideal objective lens, the incident electron probe simply forms an Airy disk in the back focal plane of the lens. This disk is the Fourier transform of ...

A-shaped Bulbs (A19): These are the standard bulbs most commonly used in household lamps and fixtures. They have a pear-like shape and a medium screw base (E26/ ...

In order to have an efficient production of preforms it is necessary to rely on a partner who invests in research and development to provide innovative and flexible solutions both for machinery and for moulds.

Moulds for the production of preforms cannot be used an infinite number of times, but by making use of refurbishment services it is possible to regenerate these essential elements, thus extending their working life.

Less use of raw materials and more streamlined logistics are elements that also result in lower expenses, bringing a boost to the company budget.

Ongoing investment in research and development has made it possible to create machines and moulds with a lower environmental impact that use rPET, lighten the weight of PET preforms and containers, use less energy and have a longer working life.

The company’s catalogue also includes filling machines, product preparation systems, secondary packaging solutions, preform injection moulds with up to 144 cavities, suitable both for SIPA machines and those made by other companies and blowing moulds.

Pattern projectorapp

SIPA preform production machines are extremely high technology and SIPA product range you also comprise single-stage systems with high and low productivity and two-stage systems with high performance line and rotating blowers.

Dittopattern Projectorreview

To obtain containers with such specific technical characteristics the role of the preform designer is of fundamental importance.

Dittopattern projectoralternative

Machines with injection-compression system must have elements that make the whole process better and more economical, for example: optimised plasticization screw with continual rotation to reduce consumption and AA levels, ability to use up to 100% rPET without making changes, rotating injection-compression wheel with reduced cavity tonnage that allows less wear in the mould.

Companies in the food sector are increasingly turning towards eco-sustainable practices and, as a result, they are looking for bottling solutions with a lower environmental impact. PET lightening is certainly a considerable step forwards in this regard, and also gives advantages for companies in terms of lower costs and increased earnings.

S.I.P.A. S.p.A Società di Industrializzazione Progettazione e Automazione Via Caduti del Lavoro,3 - 31029 Vittorio Veneto - Italy - Cap. Soc. 5.160.000 i.v. - R.E.A. n. 141344 C.C.I.A.A. di Treviso - C.F., P. IVA e Iscr. Reg. Impr. TV 01118790268 ISO CODE N IT 01118790268 Socio Unico - Società soggetta all'attività di direzione e coordinamento di ZOPPAS INDUSTRIES S.P.A.

In practice, what comes out of the machine is a test-tube shaped object with a threaded, finished neck that is then transformed into a customised container used to distinguish a specific brand.

The preform is an article made of Polyethylene Terephthalate, commonly known as PET. It is normally manufactured using a mould on an injection system, which is subsequently blown into a container for edible or non-edible liquids (water, soft drinks, milk, alcohol, oils, detergents, personal care) on a blowmoulding system.

Solutions are created taking into account the specific needs of customers, assessing, for example, the production costs, the space available in plants, the level of flexibility and the energy savings to be achieved.

The injection unit must have characteristics such as a servo drive, continual rotation of the screw at low speed, the ability to use up to 4% colouring agent without a drop in flow and to produce different extrusion sizes, the injection system with minimum loss of plasticization capacity.

Finally, those responsible for designing the preform must be able to satisfy even customers who need special containers, for example large size, stackable, with asymmetric shapes, suitable for hot liquids.

Machines with technological characteristics such as the ones listed result in a considerable reduction in TCO, make operator tasks safer and easier, and have a decided influence on the quality of the preform and the working life of the moulds.

High Cost-Effective LED Tunnel Light ... This LED tunnel light is a cost-effective lighting solution for the challenging tunnel environment. It utilizes an ...

Also, additional advantages are given by the ability to select moulds with up to 144 cavities that can be adapted to machines produced by the main manufacturers on the market.

2018320 — The optical path length is proportional to the time light needs to travel between two points. OPL = \int_{a}^{b} n(s) ds \]

By lightweighting its bottles, San Pellegrino has achieved a saving of approximately 850,000 pounds of PET per year and Coca-Cola Company has saved 650 tons. The need for less material and optimisation of transport has also meant that the two companies have retained large sums of money in their accounts.

Freeprojectorsewing patterns

Also, given the level of customisation required by companies in the beverages sector, customisation of the preforms to obtain made-to-measure packaging is increasingly of central importance.

Fiber Optic Couplers are devices used to connect two similar connector types. Couplers listed on this page have been modified for vacuum use and are UHV ...

Our studies and co-operation with companies specialising in plastic recycling technology have resulted in the first machine in the world for the production of food-grade preforms from 100% rPET flakes. Its name is XTREME Renew.

Lightening the weight of containers is a trend in the sector that must be followed in order to remain competitive on the market.

A lower bottle thickness has an influence on material savings and, obviously, on making the finished container lighter, but it is always necessary to take into account its strength and the type of shape to be obtained. It is necessary to study the customer’s needs carefully, in order to set up an efficient production process.

The technical characteristics of the machines and moulds used to create the preforms are very important, as they determine fundamental aspects such as:

Pattern projectorsoftware

The preforms are used both by companies involved in the creation of packaging for third party companies, and by industries that carry out all phases of production in house, from creation of these PET articles to bottling of the end product.

Fresnels ... Ovation Rêve F-3 IP ... New ... Ovation Rêve F-3 ... New ... Ovation F 6.25 Barndoor V2 ... Ovation F 7.5 Barndoor V2 ... Ovation F-915FC ... Ovation F-415FC ...

Epsonpattern projector

When you add to this a mould inspection service, it is possible to achieve extreme efficiency in the production of preforms.

Over thirty years’ experience in the sector makes SIPA a valuable ally both for those producing preforms and for those dealing with the entire production cycle right down to bottling.

This new approach, which is of benefit to companies in the Food & Beverage sector and to all those using PET packaging, would be ineffective if it does not produce containers with characteristics that will satisfy consumers.

For a single thin lens in air, the Lensmaker's Equation formula enables the calculation of the lens's focal length. This equation uses the index of refraction ...

The PET lightweight process developed in parallel with the need not to affect the performance of the final product, since companies shall maintain specific properties of resistance, impermeability and stability of the bottles.

Dittopattern Projector

The moulds must be designed so that the preforms are of high quality and production is fast, they must have reduced maintenance costs, a wear-proof coating, excellent neck cooling systems.

Nokia, on the other hand, has reduced the packaging on its products, halving the use of PET and resulting in 5,000 less trucks a year on the roads.

Switching to lighter, smaller packaging means using less PET and this gives a saving in materials, obviously, but also a saving in harmful emissions due to a reduction in the number of transport vehicles in circulation and less voluminous finished products.

The experts at SIPA are able to provide 360° project management, including bottle design and container prototyping assessed using computerised simulation.

To get a better understanding of how lightening of preforms can result in advantages for companies, we give several examples, already dealt with in the article “PET lightweighting: how to safeguard the strength of bottles”, which relate to three international brands: San Pellegrino, Coca-Cola, Nokia.

As early as the preform design phase it is necessary to take into account the elements that will make the PET container suitable for the company that will be using it.

Stanford Engineering has long been at the forefront of groundbreaking research, education and innovation. Through the development and application of engineering ...

Another aspect that must not be underestimated is design of the bottle neck. This element can also be made lighter and customised, further optimising the quality and characteristics of the container.

This has transformed into advantages for the environment and for the accounts of the company, which has earned hundreds of million Euros thanks to this operation.

Packaging is one of the main protagonists in all these points and, therefore, the production of PET preforms must be carried out using technologies that guarantee advantages both for companies and for the end consumers of food and beverages.

Mould refurbishment also enables an increase in the quality of products and the speed with which they are manufactured. Furthermore, this procedure makes the moulds so efficient that it almost eliminates the need for maintenance of the cold half.

As well as the advantages for the eco-system already mentioned, it is necessary to stress the economic benefits deriving from new technology applied to the production of PET preforms.