The Basler is connected and ready to go. To test the camera using PyPylon, we recommend referring to the official documentation for PyPylon. First, run pip3 install pypylon, then run the sample script in the documentation.

LensMaker equationcalculator

In this guide, we are going to walk through how to set up a Basler camera in an NVIDIA Jetson. The steps below assume you have a new or newly-flashed NVIDIA Jetson.

Todetermine what to use for the static IP, we need to get the information for the eth0 interface. To do this, open up a new terminal and run nmcli device show eth0.

Googlelensthicknesscalculator

To run the Pylon Viewer, run ./pylonviewer. You may be required to download an additional dependency for Qt. If so, please run the command sudo apt update && sudo apt install libxcb-xinerama0 libxcb-cursor0. This will install the XCB dependency for Qt. Once XCB has been installed, you can try running ./pylonviewer again.

Close out of that window and click on the refresh button on the Devices window. You should now see your Basler camera as an option. Click on the camera and then flip the toggle in the top-left for "Open Device" (reference). Then, click the video icon that says "Continuous Shot" and you should see a video stream from the Basler camera. If the video is black, move around the camera to confirm that it's not a lighting problem.

Lensedge thicknesscalculator

Focal lengthcalculatorfrom image

PyPylon is the official Python SDK for using Basler cameras. While it's strongly recommended by Basler to install the Pylon SDK before installing PyPylon, for some users, installing the Pylon SDK is not required.

To configure your Basler camera, click on the "Tools" tab up top and select "pylon GigE Configurator". Next, with "Optimize complete system" selected (This should be the default setting) click "Configure".

Basler cameras, ubiquitous in manufacturing, can be used for computer vision tasks such as object detection and image segmentation. You can use a Basler camera with an NVIDIA Jetson to run computer vision models.

Once here, choose the Pylon download that you would like. It is recommended that you choose the Debian installer for the latest Pylon version. In the case of the above image, that would be "pylon 7.5.0 Camera Software Suite Linux ARM 64 bit - Debian Installer Package".

Twolens calculator

When you open Pylon Viewer for the first time, you may not see your Basler camera. This is expected. If you do not see your camera, follow the instructions below to configure your device.

zeiss real-timelensthicknesscalculatorand visualizer

Chandler Supple. (Jun 27, 2024). How to Set Up a Basler Camera on a Jetson. Roboflow Blog: https://blog.roboflow.com/basler-jetson-deployment/

ZEISSlensthicknesscalculator

Next, input your information under the "Download now for free" form to get the download link for Pylon. Download this file, and then extract the contents of the file to your Documents folder in a new folder called "Pylon".

If you haven't already, please connect a monitor, mouse, and keyboard to your Jetson. This will be needed for the following instructions.

For the IP address of the Basler camera, choose an IP address within the same subnet as the network adapter. For example, eth0 for me was 192.168.3.1 and I chose a static IP of 192.168.3.123. Now for the subnet mask and gateway of the Basler camera, match eth0. For me, that was 255.255.255.0 and 0.0.0.0.

Lensthickness chart

If you're in a pinch, you can try running pip3 install pypylon and test the example script provided in the official documentation to see if that works. If that doesn't work though, please refer to the instructions below.

Go to the "Tools" tab again and select "pylon IP Configurator". You should see a camera icon with a warning icon to the right of it within the row. Click on the camera icon, and in the bottom window, select "Static IP".