The controller optically and electrically isolates it’s isolated inputs and outputs, preventing device-damaging ground loops. No other driver on the market has this capability.

18V Compliance for QCL devices User selectable 500mA or 1A range < 2.5uA noise 60 Watts of TEC power 0.002°C stability AutoTune automatic PID USB / RS-232 interfaces

The 6310-QCL Quantum Cascade Controller is designed for quantum cascade lasers (QCLs), which operate at a much higher voltage than typical laser diodes, providing up to 18 voltage of compliance. Combine that with excellent low current performance, with both a 1 Amp and 500mA operating range, 1uA set point resolution, and less than 2.5uA of noise, the 6310-QCL provides a transparent driver that won’t interfere with the performance of your quantum cascade laser.

When you reach the mid-to-late-game in Abiotic Factor, you need to start building Projection Matrixes. They’re necessary for progressing through the game. If you can’t find the recipe or the components, though, don’t worry. I’m here to help. Here’s how to build a Projection Matrix in Abiotic Factor.

You can find Anteverse Gems inside containers like the one in the image above. Use any blunt weapon to break open these boxes and loot the Gems inside (along with some Circuit Boards, too). There is a finite number of these boxes so, don’t bother checking areas you’ve already looted.

To learn the Projection Matrix recipe in Abiotic Factor, you need to collect a single Anteverse Gem. You can find them in the Adjustment Wing in the Containment Zone. This is a dangerous area with marines and aliens, so tread carefully. Take out enemies one at a time, bring healing items and use shortcuts to your advantage. Fortunately, you also unlock the Electro-Thrower weapons when you create your first Projection Matrix, which will make all future enemy encounters much easier.

The 6310-QCL’s user interface is remarkably simple… so easy to use, you’ll have it up and running in no time. Easy-to-read messages, simple menus, and powerful multi-line display make the instrument incredibly easy to use.

The user function keys can be used to quickly select a different configuration state or execute a predefined set of commands. Switch between two different experiments or script repetitive actions…anything you can do manually with the instrument can be programmed to the function key.

As dumb as it might sound, DO NOT RECYCLE YOUR STAPLERS. Seriously, I spend more time looking for Staplers than any other item in the game. For the love of everything, don’t turn them into scrap metal. Staplers are worth more than gold in Abiotic Factor.

In addition to the high-performance diode driver, the 6310-QCL adds a 60 watt temperature controller, giving you substantial power for demanding applications. Only need a little bit of power? No problem, because the 6310 works just as well driving 2 watts of power as it does driving 50. Support for all standard sensors (thermistor, RTD, AD590, and LM335) is also included.

To get an Optic Lens, trade a Reinforced Hose to the Blacksmith (in the Garage) by dropping it into his trading pot. We’ve already covered how to get the Anteverse Gem, so all that’s left are the Staplers.

One of the valuable features of the controller is the dual range capability, which allows operation in either a 500mA range or 1000mA range. For applications that need less than 500mA, the lower range offers higher accuracy, lower noise, and improved stability, while still maintaining the 1000mA range for higher power devices.

Fortunately, inside the Adjustment Wing, there is an exchange machine that sometimes gives you Anteverse Gems for Anteverse Wheat. You can get plenty of Anteverse Wheat by revisiting the first portal world over and over again, so you can technically get as many as you need.

All Arroyo Instruments temperature controllers feature AutoTune for automatic PID calculation. With AutoTune, you no longer need to fiddle with PID parameters to find values that work with your application. Simply hook up your mount, set the appropriate limits, and start the AutoTune process. The instrument will automatically calculate PID parameters that will work with your mount.