The IRT-5000/7000 Series infrared microscopes can be easily interfaced to any FT/IR-4X, FT/IR-6X, or FT/IR-8X instrument.

Our SWIR cameras are Visible-SWIR, meaning that they can detect not only the SWIR range but also the visible field, eliminating the need of two separated ...

Fiber Optic Lightstrands

The FT/IR-4X FTIR spectrometer with 45° Michelson interferometer (including permanently aligned corner-cube mirrors, diode laser, and AccuTrac™ DSP technology). A broad range beam-splitter has excellent performance in the mid-IR with DLaTGS detector and non-hygroscopic KRS-5 windows. For higher sensitivity, an MCT detector is a good addition for accessories with low light throughput, such as long path-length gas cells. The standard Ge/KBr beam-splitter can be exchanged with one of several different options to extend the wavenumber range from 15,000 cm-1 in the NIR to either 220 or 50 cm-1 in the Far-IR.

The FT/IR-8X FTIR spectrometer is more advanced and highly configurable, including a HeNe laser and gold-coated optics, operation is similar to the FT/IR-6X but it can also be configured for analyses that require extremely high sensitivity and resolution (down to 0.07 cm-1) or microsecond/nanosecond step-scan measurement.

Uro probiotics is a 'daily vaginal probiotic' that keeps vaginal flora healthy, helping to maintain a normal odour'. It is research-backed with the latest ...

Dopo essere stato creato per uccidere gli Avengers, è divenuto uno dei loro membri più longevi. Ha trovato l'amore di Scarlet ed è finita male.

When your order has been completed, you will receive a confirmation e-mail that will be sent to the e-mail address that you entered in the "Registration” page before checkout.

Fiber OpticLights for Ceiling

If our store can’t calculate your shipping costs during checkout, your order may fall outside weight, size, or destination restrictions, for online ordering.

Please note, customers cannot return software for a refund.  However, we do offer a store credit for the full amount if returned within 21 days. After 21 days a restocking fee may apply.

The FT/IR-6X and FT/IR-8X can be fitted with several vacuum options, and can be configured for full vacuum or partial with vacuum interferometer and detector compartments and with the sample chamber nitrogen purged.

If you do not have a credit card, please call us at 1-800-353-1107 (8:30am - 4:30pm EST) to discuss alternative payment methods.

Most of our items are shipped by secured courier, which takes 3-5 business days to reach the customer. Where service is not available, or due to the special requirements of the product, we will also use UPS, Puralator or Canada Post.

The FT/IR-8X is a highly configurable optical system, applicable to virtually any FTIR application, from simple Mid IR measurement to much more complex applications, such as step-scan, emission characterization etc.

USAF 1951 Resolution Test ChartThe USAF 1951 resolution test chart is a standardized tool used to measure the resolving power of optical systems such as ...

The interferometer is manufactured as a solid cast aluminum block and is hermetically sealed. The FT/IR-4X uses a 45° Michelson interferometer, while the FT/IR-6X/8X use a 28° Michelson interferometer. A near frictionless bearing (without the need for a gas supply) supports the moving mirror which is driven electromagnetically for accurate vibration-free movement. Laser tracking of the moving mirror is made using a diode laser in the FT/IR-4X/6X and a HeNe laser in the FT/IR-8X, coupled with Accutrac™ digital signal processing. The standard solid KRS-5 windows prevent hygroscopic damage often seen with KBr or coated windows used on some products.

The ATR PRO 4X VIEW is a single-reflection monolithic diamond ATR accessory with a 45° incident angle specifically designed for the FT/IR-4X sample compartment. The ATR PRO 4X VIEW has a camera and LCD monitor for real-time sample observation. The observed image and spectrum data are saved together in a single file.

These include navigation (using polarized patterns in the sky), finding food, communicating with mates and rivals, and camouflage breaking. Polarization in the ...

The X-Series of FTIR spectrometers takes advantage of many useful software applications in the intuitive Spectra Manager™ Suite with integrated search software solution, KnowItAll® Informatics, and database.

The FT/IR-4X is a powerful mid-range, compact FTIR spectrometer, with many features that you find in a research-grade instrument, such as corner-cube mirrors, non-hygroscopic KRS-S windows and a temperature controlled DLaTGS detector.

The FT/IR-6X FTIR spectrometer includes a more advanced optical system with a 28° Michelson interferometer (also with corner-cube mirrors, diode laser, and AccuTrac™ DSP technology), for high-resolution measurement an optional  HeNe laser replaces the diode laser. The FT/IR-6X is designed for more challenging FTIR measurements such as custom sampling accessories with external detector, trace gas analysis, or emission characterization, which require higher throughput, and often require several beam-splitters and/or detectors.

To return a product you need to get a Return Authorization (R.A.) number from us. Please call us at 1-800-353-1107 (8:30am - 4:30pm EST), e-mail us at info@bridges-canada.com or fax us at 905-542-7242 to get an R.A. number and further instructions. Please note, Bridges will not accept returns without an R.A. number. The customer is responsible for shipping costs of returned products.

The ATR PRO X is a single-reflection monolithic diamond ATR accessory with a 45° incident angle that can be placed in the sample compartment of the FT/IR-4X, FT/IR-6X, or FT/IR-8X.

The ATR PRO 4X is a single-reflection monolithic diamond ATR accessory with a 45° incident angle specifically designed for the FT/IR-4X sample compartment.

Spectra Manager™ 2.5 software allows users to develop predefined methods for custom sampling and analysis applications, executing with a single button press. Data Compare is standard for comparing a measured spectrum with a custom spectral library. Wiley “KnowItAll® Informatics System, JASCO Edition” with a library of 12,000 chemical and polymer spectra is standard (except LE versions) and with 3 month access to the entire spectral library database over over 260,000 IR spectra.

Translate "syringe" from English to German, Spritze, back-fill syringe, disposable syringe, oil syringe, . See word usage in contexts, conjugation and ...

Many optional detectors cover the range from 25,000 to 5 cm-1 and include several LN2 cooled pv/pc MCT detectors for wide, narrow and mid-band. Other detectors include silicon photodiode, InGaAs, Si bolometer, etc.

Automatic recognition of the sampling accessory is made when it is fitted into the sample compartment. It can also be used to automatically load measurement parameters matched to the accessory; this ensures that data is acquired using the correct parameters.

Rapid Scan is an option on the FT/IR-4X (80 Hz) and FT/IR-6X (40 Hz), and standard on the FT/IR-8X (40 Hz). Rapid Scan can be used for fast spectral acquisition using interval analysis.

We offer a 21-day money-back guarantee unless otherwise noted. Products must be returned in a resalable condition as determined by Bridges. Returns are subject to a 20 percent restocking fee after 21-days. Many of our manufacturers offer additional limited warranties of longer durations on their products. Returns will no longer be accepted after a period of 90 days. Please call us at 1-800-353-1107 (8:30am - 4:30pm EST) or send an e-mail to info@bridges-canada.com for more information about manufacturer's warranties or returning your product.

FTIR-4000 and 6000 Spectrometers A high S/N measurement is often required for the FT-IR analysis of low concentrations of gas or vapor compounds. In addition, the measurement of certain gas samples can be affected by the atmospheric water vapor and carbon dioxide present in the instrument, even with nitrogen purging. It is especially difficult to a...

The temperature controlled VCSEL diode laser offers high resolution spectroscopy with an exceptionally long lifetime. HeNe lasers are used for the highest resolution 0.07 cm-1 and for applications that require visible wavelengths.

Order processing time depends on availability of the product from the manufacturer, but typically products are shipped within 10-15 business days after the order is placed. See shipping options for the number of days it will take to reach you after it leaves our warehouse.

Infrared spectroscopy is an effective technique for component analysis and interaction analysis of biological samples such as proteins, sugars and lipids. FTIR spectroscopy can be used to measure solid and liquid samples when applied to secondary structure analysis of proteins. JASCO has previously reported the study of aqueous protein solutions*1....

Ideal for any darkened sensory environment, this switch adapted Fibre Optic Light creates a mesmerising and magical display of multi-coloured lights.

The ATR PRO Series is fully integrated, but can easily be exchanged with other sampling accessories. The external design is easy to clean with a fully rotatable (360°) anvil for full access when placing samples onto the prism.

Fiber optic lightfor car

The Start Button allows immediate start of sample measurement with a single press - this is a more convenient alternative to keyboard and mouse operation when starting data measurement.

Nov 4, 2020 — If you change the aperture/F# by a factor of 2 (2x, 1/2) it changes the DOF by a factor of 2 as well. But if you change the FL or the subject/ ...

When the order is shipped out, you will receive an e-mail with a tracking number. If you do not receive this e-mail, please call 1-800-353-1107 (8:30am - 4:30pm EST) to receive your tracking number.

Fiber opticlamp Vintage

The FT/lR-6X with 28 degree Michelson interferometer is an excellent choice for more demanding research applications, where better polarization performance or a more flexible approach to samples and measurement are required.

A sequence of operations, including data processing, can be defined in a sequence in the Spectra Manager measurement application, the sequence can started by the press of the Start button for fast and comprehensive measurement.

The ATR PRO X VIEW is a single-reflection monolithic diamond ATR accessory with a 45° incident angle that can be placed in the sample compartment of the FT/IR-4X, FT/IR-6X, or FT/IR-8X. The ATR PRO X VIEW has a camera and LCD monitor for real-time sample observation. The observed image and spectrum data are saved together in a single file.

Fiber optic lightoutdoor

It is composed of durable metal frame with a unique mirror design that will add a contemporary look to your home. Suitable to hold small accessories such as ...

Shipping is calculated individually depending on the weight and size of the item. This will be calculated automatically upon checkout and will be included in the total price when you go to the checkout.

Fiber Opticsensory lights

Fiber opticlighting for homes

Project Kics Slip On Wheel Spacer Pair 3mm 5x114.3 / 5x100 ... Wheel spacers are always a great option for those of you who need to get better caliper clearance ...

For laboratories that operate under the requirement of regulatory compliance,  instrument validation routine  standard for verification of instrument performance compliant with ASTM, EP, and JP procedures. Spectra Manager CFR is compliant to the latest requirements of ALCOA+

Bestfiber optic light

QCL1500 OEM(+) Low Noise Quantum Cascade Laser Driver · Positive polarity · Low noise - 1.25 µA RMS (100 kHz) · Ideal for precision chemical sensors · Up to ...

Advanced FTIR Imaging Microscope with Linear Array Detector In recent years we have seen an explosive growth in the applications of the FTIR Imaging Microscope and the data resulting from these imaging systems. From materials research to the imaging of cancer cells and disease as well as uses as a quality control tool for polymers and pharmaceutica...

Several Step Scan options are available for the FT/IR-8X; these include µsec and nsec Time-Resolved Spectroscopy (TRS), phase modulation, and amplitude modulation.

All models have fully sealed and desiccated aluminum interferometer chamber. In addition, an integrated purge for the sample compartment (FT/IR-4X) and complete system (FT/IR-6X and FT/IR-8X) is included as standard.

Any information submitted through the web store is safe and secure. Bridges uses state-of-the-art security encryption methods to ensure the highest standards of security for its online customers.

Corner cube mirrors automatically correct for any light path deviation, providing excellent optical stability at all times. Eliminating the need for dynamic alignment, which often lag the detrimental effects of tilt in plane mirrors.

The highly stable interferometer with high-intensity two-stage ceramic light source offers optimum signal-to-noise performance starting at 35,000:1 and up to 55,000:1 (under standardized conditions).