The photo below shows a ten stop neutral density filter mounted on the front of a lens. As you can see, the filter is nearly opaque; once it’s added to your setup, you won’t be able to see through the camera viewfinder.

EdmundOpticswiki

ND filters block light, yet photographers generally want more light, not less. So why should you consider using an ND filter?

But I wanted blur in the water, so I added an ND filter and turned that exposure time into a whopping 210 seconds. Here’s the resulting shot:

Sep 9, 2024 — NJ At 'High' Level For COVID Transmission, Latest CDC Data Shows - Across New Jersey, NJ - Updated wastewater data samples show "high" or ...

EdmundOpticsheadquarters

Unfortunately, when the light is strong, a wide aperture will let in too much light, resulting in overexposure. So the blur-happy photographer is either forced to wait until the light dies down, or must use a narrow aperture and sacrifice their beautiful wide-aperture backgrounds.

EdmundOpticsCatalog

Using an ND filter to capture slow-shutter landscape photos can take careful technique, especially if you’re using a strong filter (e.g., 10 stops or 16 stops).

Well, as it turns out, more light is good…most of the time. Occasionally, though, you’ll find that you have too much light to work with, which is where ND filters come in handy.

GND filters are designed to handle uneven exposures. If you’re photographing a sunset with a bright sky and a dark foreground, the darker portion of the GND filter will dial back the sunset, while the lighter portion will do nothing. That way, you get a well-exposed sky and a well-exposed foreground in the same photo. Make sense?

That’s where ND filters come in. You can use your ND filter to block the light, which in turn allows for beautiful long exposures of landscapes.

In other words, a neutral density filter is a dark piece of glass that goes in front of (or behind, in some special circumstances) your lens.

Ultimately, you have to decide how much you want to spend (some ND filters are quite expensive!), then look at the options. But I can start by telling you which filters I own and recommend.

by C Lyons · 2022 — Quantify the effects of head rotation and head incline on obstructive sleep apnea (OSA) severity. Single-arm, intervention study.

Find many great new & used options and get the best deals for 5mm Diameter Chrome Steel Pins 250mm Long Bearings 18133 at the best online prices at eBay!

EdmundOpticslocations

So if you want to know how to use a neutral density filter, when to use an ND filter, or why to use an ND filter, you’ve come to the right place.

Note that the higher the ND filter strength, the more light that gets blocked. So an ND2 filter, which blocks one stop of light, pales in comparison to an ND64 filter and its six-stop light-blocking capabilities.

Note: If you plan to use your filters on multiple lenses, buy the filter size you need for the largest lens, and get step-down rings to adapt the filters to fit the smaller lenses – or get a square drop-in filter kit instead.

And hopefully, now that you’ve read this article, you love them, too! So buy an ND filter or two. Start practicing. And take some amazing shots!

It’ll fit over the lens and block out some of the bright light. That way, you can use a wide aperture to achieve your desired blur effect without overexposing the shot.

In this article, I share everything you need to know about ND filters, including basic instructions, specific gear recommendations, plus some helpful advice along the way.

Some manufacturers even make neutral density filters that block 16 stops of light or more, although these are specialty items and infrequently used by the average photographer (professional or otherwise).

EdmundOpticscareers

Edmund Optics® (EO) is a leading global manufacturer and supplier of technology solutions that has been serving a variety of markets since 1942. The company employs more than 1,250 people across 18 global locations and continues to expand. It services its customers through two distinct offers: Edmund Optics’ Marketplace – a one-stop shop for the best brands and products in optics and photonics with off-the-shelf products available for immediate shipping; and Optical Manufacturing Services – custom design, prototyping, and volume manufacturing of high-quality optical and imaging components and systems. The future depends on optics and Edmund Optics is proud to play a part.

EdmundOpticsrevenue

Fresnel lenses come in different sizes and can be used in a variety of applications. Read more about the theory, manufacturing, and application use at ...

As you’ve probably gathered, neutral density filters are especially useful for portrait photography, especially portraits done in bright sunlight. They’re also highly useful for landscape photography – if your goal is to blur a moving subject, an ND filter can probably make it happen.

As mentioned above, it’s tough to see through a powerful ND filter. So you’ll need to identify your composition and set your point of focus before adding the filter. (You may also want to determine the proper exposure prior to adding the filter, then adjust the shutter speed to compensate once you’ve added the filter to your lens).

Feb 1, 2022 — Manufacturers state field of view either in degrees (°) or in feet at 1,000 yards. Typical values for birding binoculars are between about 5.5° ...

Neutral density filters block light evenly across the frame. Graduated neutral density filters, on the other hand, block light across just part of the frame. Half the filter is clear, half is opaque, and you get a graduated area in between.

Make sure you’ve mounted your camera to a tripod (you don’t want to end up with any camera shake!). Then trigger the shutter using a remote release or your camera’s self-timer function.

Just choose a relatively weak ND filter (in the one-stop to three-stop range). Mount it in front of your lens. And take photos the way you normally would, except with greater latitude when choosing the aperture.

EdmundOpticsaddress

You see, I use an ND filter kit, the circular Formatt Hitech 72mm Firecrest Joel Tjintjelaar Signature Edition Long Exposure Kit. It contains three neutral density filters, with strengths of 3, 6, and 10 stops.

In fact, I’d say that this function – for long exposures in the landscape – is probably the most common reason to see an ND filter on a photographer’s lens.

Edmund Optics offers optical components, multi-element lenses, imaging systems, optomechanics and lasers on the MEETOPTICS website.

Edmund Optics Europe supports you in various local languages and offers free technical support and customer service via email or phone, as well as a 24/7 Product & Application online chat – an industry first! More than 34.000 products and over 2 million items are ready for shipping!

EdmundOpticslogo

If you still can’t get the aperture you’re after, then you can always swap out your original ND filter for a stronger option.

is a writer, photographer, traveler and workshop leader. He’s an experienced teacher who enjoys helping people learn about photography and Lightroom. Join his free Introducing Lightroom course or download his free Composition PhotoTips Cards!

The photo below shows a two-stop graduated neutral density filter in a square filter holder. The top half of the filter is dark (to block light) and the bottom is clear:

Since the index of refraction of the tape is different for each color of light, each color has its own unique pair of speeds as it passes through the tape. The ...

The eyepiece (or ocular) is designed to project either a real or virtual image, depending upon the relationship between the intermediate image plane and the ...

Different neutral density filters offer different levels of light-blocking power, generally measured in stops of light. Typical ND filter strengths are one stop (written as “0.3” or “ND2”), two stops (written as “0.6” or “ND4”), three stops (written as “0.9” or “ND8”), six stops (written as “1.8” or “ND64”) and ten stops (written as “3.0” or “ND1024”).

However, you can certainly use ND filters in other scenarios. For instance, an architectural photographer might want to blur the clouds when photographing buildings or even home exteriors. An abstract photographer might want to blur water when photographing on the beach. And a videographer might want to keep their aperture wide while filming in the sun.

Lenses can be thought of as a series of tiny refracting prisms, each of which refracts light to produce their own image. ... meaning is firmly internalized in ...

How do you plan to use your neutral density filters? Which filters do you plan to buy? Share your thoughts in the comments below!

Just make sure to watch the light carefully. If the sun goes behind clouds, you may need to take the filter off the front of your lens to get the shots you want.

A neutral density filter blocks light, which is why it’s sometimes referred to as sunglasses for your lens. The result? Less light passes through the lens to reach the camera’s sensor.

As you may be aware, wide apertures create beautiful blurry background bokeh that makes the subject pop off the page (portrait photographers love this!).

In general, graduated filters are used by landscape photographers to deal with tricky sky-foreground lighting conditions. And unlike neutral density filters, their purpose isn’t to slow down the shutter speed or widen the aperture – instead, it’s simply about blocking out a too-powerful sky.

But to create a long exposure, you generally need a shutter speed of a second or longer, which is pretty much impossible to do in the middle of the day without dramatic overexposure.

A diffraction grating is essentially a multi-slit surface. It provides angular dispersion, i.e., the ability to separate wavelengths based on the angle that ...