Massage Therapy Foundation – Advancing the knowledge ... - m t f

 2024-07-11 08:09:41

Optical mounts- thorlabs

Tikka T3 Rings - 30mm Tube, High Height Ring and Base solution specifically designed for Tikka T3 rifles. Solid Steel. Manufactured by Burris. Part #: 420137

Aimpoint CompM5s Mount Kit - 57.4mm OEM 57.4mm aluminum picatinny mount kit for the Aimpoint CompM5s optic. Part #: 200744

Vortex Precision Diving Board Mount - 30mm Vortex® Precision Diving Board Mounts are machined with certified USA7075T6 billet aluminum, held to an extremely tight tolerance of .0005" and anodized with Type III hardcoat. This diving board mount...

Burris XTR Signature Rings - 34mm Tube, 1.0" High New XTR Signature Rings were designed for the tactical shooter. They deliver plenty of holding power, with less weight. Features: Unique, self-centering, dual steel clamps with full cross-through...

Scalarworks SYNC/02 Aimpoint Micro Mount for Benelli Shotguns Cutting Edge Aimpoint Micro mount for Benelli shotguns. Puts your Aimpoint Micro in the ideal shooting position. Enhance the effectiveness of your shotgun with the speed and precision of a red...

SPUHR Picatinny Aesthetic Rings - 30mm, 0.75" The SPUHR Picatinny Aesthetic Rings are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion...

SPUHR Wilcox Raptar Adapter - BLK Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES, or SilencerCo RADIUS laser range finder to ISMS scope mount. Includes screws. Specifications: Height: 25 mm/.984” Length: 85 mm/3.346”...

Diffraction and refraction are both wave properties. They sound similar, as both represent some sort of bending of waves. Diffraction is bending ...

Edmund Optics

Trijicon RMR/SRO Quick Release Lower 1/3 Co-Witness Mount The Trijicon RMR®/SRO™ Lower 1/3 Co-Witness Quick Release mount features a Mil-Spec drop test rated 7075-T6 aluminum design, with an easy to use one handed tool less mounting...

Burris AR-P.E.P.R. Scope Mount - 1.0", 0 MOA The Burris P.E.P.R. mount has become the absolute go-to mount of choice for an incredibly solid, long-lasting cantilever mount. It makes mounting an optic to an AR-style rifle very easy, providing the...

Scalarworks KICK/03 Aimpoint Acro Offset Mount - Right Hand Designed for shooters who want the lightest, strongest, and most compact offset optic mount possible. The Kick is the strongest Aimpoint Acro offset mount we've ever tested. We put a variety of...

Holosun Picatinny Rail Mount for 407C, 507C & 508T Models Made of high strength aluminum. Picatinny rail mount for Holosun's 407C, 507C & 508T series micro optics. Secures onto MIL-STD-1913 picatinny rails via cross-bolt with torx head. 4 x...

SPUHR ISMS Mount - 30mm, 20 MOA, 1.5", QD Lever The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to...

Vortex Pro Rings - 34mm, Medium The finishing touch for your rifle and optic combination, Pro Riflescope Rings combine rock-solid reliability and strength with high quality machining to ensure accuracy and consistency. Streamlined, light weight, and...

Arisaka Defense Offset Optic Mount Plate (NOTE: Plate ONLY!) The Patented Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for their red dot sight without additional...

SPUHR ISMS Mount - 30mm, 20 MOA, 1.18" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

SPUHR ISMS Mount - 34mm, 0 MOA, 1.18" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

Light angle brackets with rounded ends are used for reinforcing chairs, tables, and cabinets. One part has a slotted hole. The slot allows the adjustment of ...

SPUHR Aimpoint T-2 Mount - H39mm/1.53" Our new light-weight tough-as-nails formfactor! 17 g/0.6 oz lighter than the SM-2007! Features: Absolute Co-witness Height: 38 mm/1.53" (with Aimpoint Micro T-2) Height from rail to footprint: 24.26 mm/0...

Gimbal Mirror Mount

by RMA Azzam · 2010 · Cited by 4 — The constraint on (n,α) for maximally flat transmittance (MFT) of p-polarized light at and near the MD condition is determined. The transmittance Tp of prisms ...

Burris Zee Rings - 1" Tube, Low These Weaver-style rings are solid steel, so you can rely on their accuracy. Features: Machined to exact tolerance Top and bottom matched for strength and fit Handles recoil of any rifle Available in 1-in. and 30 mm...

Arisaka Defense Offset Optic Mount Base The Patented Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for their red dot sight without additional components. The 35 degree...

SPUHR Aimpoint T-2 Mount - H57mm/2.25" Our new light-weight tough-as-nails formfactor! Features: Height: 57 mm/2.25" (with Aimpoint Micro T-2) Length: 57.5 mm/2.26" Weight: 86 g/3.0 oz Compatible with the A-0229 Picatinny Rail 75 mm, RD/F for use with...

Edmund Optics Inc., doing business as Edmund Scientific Co., is a manufacturer and supplier of optical components and equipment to various federal agencies.

Straight Line Laser Level(139+) · Huepar W04CG Multifunctional 4D 16 Straight Lines Laser Level 360 Degree Motorized Rotating Base Self- · Laser Level Scale ...

SPUHR Picatinny Rail - 55mm, BLK Picatinny rail for attaching accessories to our forends (1 pcs included with all forends). Screws: Tx20 M4x8 (included) Specifications: Height: 8 mm/0.315" Length: 55 mm/2.16" Weight: 15 g/0.5 oz Part #: A-0002 ***NOTE:...

Vortex Pro Rings - 34mm, Low The finishing touch for your rifle and optic combination, Pro Riflescope Rings combine rock-solid reliability and strength with high quality machining to ensure accuracy and consistency. Streamlined, light weight, and...

SPUHR ISMS Mount - 34mm, 20 MOA, 1.5" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

Thorlabs adjustable Lens Mount

Vortex Arca-Swiss Quick Release Plate Make sure you can attach and detach your optics quickly and securely in the field with the Arca-Swiss Quick Release Plate. Durable, anodized aluminum construction keeps your tools anchored in place. Part #: TRA-ARCP

The MRX-B can be configured to suit individual customer requirements. The Linear-8 tool changer keeps the operation very simple, while the Roto-10 changer increases the process speed. Highest processing speed can be achieved by combining the Roto-10 magazine with the water jet cutting head. Modular expansion of the machine length and free choice of running direction allow for a wide range for customer configurations. The system is also part of the SplitFin processing solution.

The LiSEC MRX-B, optionally available with water jet technology, is a fully automatic milling and drilling machine for glass that delivers high performance combined with easy operation.

Tikka T3 Rings - 30mm Tube, Medium Height Ring and Base solution specifically designed for Tikka T3 rifles. Solid Steel. Manufactured by Burris. Part #: 420136

Burris AR-Signature QD P.E.P.R. Scope Mount - 34mm The new streamlined design with QD mount ensures ¼ MOA re-mount capability and allows for use of back up iron sights while maintaining proper eye-relief. Available in 30, 34 and 35-mm options with...

SPUHR ISMS Mount - 34mm, 0 MOA, 1.5", QD Lever The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to...

Scalarworks LEAP/04 Trijicon RMR QD Mount - 1.57" Height Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible. The Leap is the strongest Trijicon RMR Quick-Detach mount we've ever tested. We put a...

Burris 1/2-Inch Pacatinny Riser Mount Get extra height for optimal sight alignment. The 1/2-Inch Picatinny Riser is ideal for AR and M16 receivers and other tactical rifles. Part #: 410340

SPUHR ISMS Mount - 34mm, 20 MOA, 1.5", QD Lever The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to...

Scalarworks SYNC/02 Aimpoint ACRO Mount for Beretta 1301 Cutting Edge Aimpoint ACRO mount for Beretta shotguns. Puts your Aimpoint ACRO in the ideal shooting position. Enhance the effectiveness of your shotgun with the speed and precision of a red dot...

OpticalMirrorMounts

Licht, das nur eine einzige Wellenlänge enthält.

Large lens mount

SPUHR Acro P-1 Interface Interface for attaching the Aimpoint ACRO P-1 red dot sight to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws. Weight: 20 g/0.7 oz Part #: A-0055 Made in Sweden.

SPUHR ISMS Mount - 34mm, 20 MOA, 1.18" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

Aimpoint Acro Rear Sight Mount Plate Rear sight pistol mount plate for mounting Aimpoint® Acro red dot sights on Glock handguns without the optic ready system. Installation by certified gunsmith is recommended. Part #: 200622 DISCLAIMER: This...

By Dave Riccio, ASE Certified Technician, Owner of Tri-City Transmission & Auto Repair, Co-host of Bumper to Bumper Radio. CASE STUDY: 2009 Chevrolet ...

Kinematic MirrorMounts

Aimpoint Acro 45° Angle Mount This red dot mount is compatible with Aimpoint's Acro red dot series and attaches to picatinny rails. This mount positions the Acro at a 45 degree angle on both the right and left side of a rail. This allows the user to...

Aimpoint Acro P-2, C-2 Aluminum Battery Cap [200859] Fits Aimpoint® Acro C-2 and Acro P-2 sights Replacement kit with aluminum battery cap, O-ring and damper Part #: 200859

Burris AR-Signature QD P.E.P.R. Scope Mount - 30mm The new streamlined design with QD mount ensures ¼ MOA re-mount capability and allows for use of back up iron sights while maintaining proper eye-relief. Available in 30, 34 and 35-mm options with...

SPUHR Aimpoint T-2 Magnifier Mount - H57mm/2.25" PIC The worlds most rugged Aimpoint T-2 Magnifier Mount. Our new light-weight tough-as-nails formfactor! Compatible with the A-0229 Picatinny Rail 75 mm, RD/F for use with illuminators. Height: 57 mm/2...

Vortex Precision Diving Board Mount - 34mm Vortex® Precision Diving Board Mounts are machined with certified USA7075T6 billet aluminum, held to an extremely tight tolerance of .0005" and anodized with Type III hardcoat. This diving board mount...

Versatility is an important asset of the MRX-B for glass processing: It can be used for drilling, milling, countersinking and grinding. Drill and countersunk holes can be processed just as efficiently as complex corners, edges and inner cut-outs. The MRX-B WJ version (the WJ stand for WaterJet) adds the advantage of the optional water jet cutter, which significantly speeds up cut-out processes.

Vortex Viper Extended Cantilever Mount Vortex Viper 1 inch cantilever ring mount provides the correct height and forward placement for proper scope mounting. Made in USA. The cantilever ring mount positions the center of the riflescope tube at a height...

UV Pass Filter A UV pass filter, also known as an ultraviolet pass filter, is an optical filter that is designed to transmit ultraviolet light while ...

SPUHR Micro Mount, Absolute The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws. Features Spuhr interfaces on the non-clamping side. Absolute Co-witness. Height: 38 mm/1.5"...

Vortex Viper Extended Cantilever Mount Vortex Viper 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. Made in USA. The cantilever ring mount positions the centre of the riflescope tube at a...

Thorlabs Mount

The fluorescence emission spectrum of Fluorescein dissolved in basic ethanol. The excitation wavelength was 470nm. The quantum yield of this molecule is ...

Tikka T3 Rings - 1" Tube, Medium Height Ring and Base solution specifically designed for Tikka T3 rifles. Solid Steel. Manufactured by Burris. Part #: 420135

Eyewear for everyone™. At Zenni, we believe that stylish, high-quality prescribed glasses should be accessible to all. As a leading online glasses company since ...

Vortex Pro Rings - 34mm, High The finishing touch for your rifle and optic combination, Pro Riflescope Rings combine rock-solid reliability and strength with high quality machining to ensure accuracy and consistency. Streamlined, light weight, and...

SPUHR Hunting Mount - 30mm, 0 MOA, 1.18" Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42,...

Burris CZ-Style Rings - 1" Tube, Medium Burris rings for CZ rifles are machined from solid steel for reliable accuracy. Features: Design to fit the unique CZ receiver Made to exact tolerance Top and bottom matched for strength and fit Handles...

Vortex Viper Extended Cantilever Mount Vortex Viper 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. Made in USA. The cantilever ring mount positions the centre of the riflescope tube at a...

The drilling and milling centre operates fully automatically and supports data links to external systems. Graphically supported entry of processing programs and automatic selection of all drilling and milling parameters make operation easy and error-free.

SPUHR ISMS Mount - 34mm, 0 MOA, 1.5" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

The MRX-B WJ achieves extremely fast cycle times. For a shower door with two Mickey Mouse cut-outs and a handle hole the system needs less than 90 seconds. Processing the same door with ground cut-outs takes less than two and a half minutes. These rapid processing times are enabled by technical refinements. For example, positioning the water jet cutting head directly below the processing spindle on the same axle allows faster changes between tools and waterjet processing. Furthermore, mounting the tool changer directly on the processing spindle speeds up the tool changes, right at the processing location where the tool is required. This minimizes unproductive idle times.

SPUHR ISMS Mount - 30mm, 0 MOA, 1.18" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent...

SPUHR ISMS Cantilever Mount - 34mm, 0 MOA, 1.49" The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to...