Mach–Zehnder Modulator - mach zehnder

 2024-10-10 12:23:05

4: Explain what happens to the energy carried by light that it is dimmed by passing it through two crossed polarizing filters.

3: If you have completely polarized light of intensity 150 W/m2 what will its intensity be after passing through a polarizing filter with its axis at an 89.0o angle to the light’s polarization direction?

Laser collimation

Figure 10 illustrates how the component of the electric field parallel to the long molecules is absorbed. An electromagnetic wave is composed of oscillating electric and magnetic fields. The electric field is strong compared with the magnetic field and is more effective in exerting force on charges in the molecules. The most affected charged particles are the electrons in the molecules, since electron masses are small. If the electron is forced to oscillate, it can absorb energy from the EM wave. This reduces the fields in the wave and, hence, reduces its intensity. In long molecules, electrons can more easily oscillate parallel to the molecule than in the perpendicular direction. The electrons are bound to the molecule and are more restricted in their movement perpendicular to the molecule. Thus, the electrons can absorb EM waves that have a component of their electric field parallel to the molecule. The electrons are much less responsive to electric fields perpendicular to the molecule and will allow those fields to pass. Thus the axis of the polarizing filter is perpendicular to the length of the molecule.

Light reflected at these angles could be completely blocked by a good polarizing filter held with its axis vertical. Brewster’s angle for water and air are similar to those for glass and air, so that sunglasses are equally effective for light reflected from either water or glass under similar circumstances. Light not reflected is refracted into these media. So at an incident angle equal to Brewster’s angle, the refracted light will be slightly polarized vertically. It will not be completely polarized vertically, because only a small fraction of the incident light is reflected, and so a significant amount of horizontally polarized light is refracted.

12: Light reflected at 55.6o from a window is completely polarized. What is the window’s index of refraction and the likely substance of which it is made?

Polarizing filters have a polarization axis that acts as a slit. This slit passes electromagnetic waves (often visible light) that have an electric field parallel to the axis. This is accomplished with long molecules aligned perpendicular to the axis as shown in Figure 9.

What angle is needed between the direction of polarized light and the axis of a polarizing filter to reduce its intensity by 90.0 %?

17: (a) 2.07 x10-2 o C/s (b) Yes, the polarizing filters get hot because they absorb some of the lost energy from the sunlight.

Aspherical collimator lens is another hot product that we offer as a cost-effective replacement for volume production. Unfortunately, brand-name aspherical lenses are not the most budget-friendly. Hyperion Optics provides reverse engineering services to help you maintain a competitive edge in the global market, oftentimes with even better system performance since our redesign aimed at optimizing the aspherical lens for your specific application. Please refer to our reverse engineering and aspherical surface production pages for more information.

Figure 8 illustrates what happens when unpolarized light is reflected from a surface. Vertically polarized light is preferentially refracted at the surface, so that the reflected light is left more horizontally polarized. The reasons for this phenomenon are beyond the scope of this text, but a convenient mnemonic for remembering this is to imagine the polarization direction to be like an arrow. Vertical polarization would be like an arrow perpendicular to the surface and would be more likely to stick and not be reflected. Horizontal polarization is like an arrow bouncing on its side and would be more likely to be reflected. Sunglasses with vertical axes would then block more reflected light than unpolarized light from other sources.

Laser collimatinglens

1: What angle is needed between the direction of polarized light and the axis of a polarizing filter to cut its intensity in half?

4: What angle would the axis of a polarizing filter need to make with the direction of polarized light of intensity 1.00 kW/m2 to reduce the intensity to 10.0W/m2?

Collimated lightsource

7: When light is reflected at Brewster’s angle from a smooth surface, it is 100% polarized parallel to the surface. Part of the light will be refracted into the surface. Describe how you would do an experiment to determine the polarization of the refracted light. What direction would you expect the polarization to have and would you expect it to be 100 %?

Another interesting phenomenon associated with polarized light is the ability of some crystals to split an unpolarized beam of light into two. Such crystals are said to be birefringent (see Figure 15). Each of the separated rays has a specific polarization. One behaves normally and is called the ordinary ray, whereas the other does not obey Snell’s law and is called the extraordinary ray. Birefringent crystals can be used to produce polarized beams from unpolarized light. Some birefringent materials preferentially absorb one of the polarizations. These materials are called dichroic and can produce polarization by this preferential absorption. This is fundamentally how polarizing filters and other polarizers work. The interested reader is invited to further pursue the numerous properties of materials related to polarization.

Collimatinglensvs focusinglens

Many crystals and solutions rotate the plane of polarization of light passing through them. Such substances are said to be optically active. Examples include sugar water, insulin, and collagen (see Figure 13). In addition to depending on the type of substance, the amount and direction of rotation depends on a number of factors. Among these is the concentration of the substance, the distance the light travels through it, and the wavelength of light. Optical activity is due to the asymmetric shape of molecules in the substance, such as being helical. Measurements of the rotation of polarized light passing through substances can thus be used to measure concentrations, a standard technique for sugars. It can also give information on the shapes of molecules, such as proteins, and factors that affect their shapes, such as temperature and pH.

6: Show that if you have three polarizing filters, with the second at an angle of 45o to the first and the third at an angle of 90.0o to the first, the intensity of light passed by the first will be reduced to 25.0% of its value. (This is in contrast to having only the first and third, which reduces the intensity to zero, so that placing the second between them increases the intensity of the transmitted light.)

where n1 is the medium in which the incident and reflected light travel and n2 is the index of refraction of the medium that forms the interface that reflects the light. This equation is known as Brewster’s law, and θb is known as Brewster’s angle, named after the 19th-century Scottish physicist who discovered them.

An ND filter is a versatile tool that enables photographers and filmmakers to control the amount of light entering their cameras without affecting the color ...

If a polarizing filter reduces the intensity of polarized light to 50.0 % of its original value, by how much are the electric and magnetic fields reduced?

There is a range of optical effects used in sunglasses. Besides being Polaroid, other sunglasses have coloured pigments embedded in them, while others use non-reflective or even reflective coatings. A recent development is photochromic lenses, which darken in the sunlight and become clear indoors. Photochromic lenses are embedded with organic microcrystalline molecules that change their properties when exposed to UV in sunlight, but become clear in artificial lighting with no UV.

Gibco™ 2-Mercaptoethanol (50 mM) DFS Item ... Description. Gibco™ 2-Mercaptoethanol (also known as beta-mercaptoethanol or BME) is a potent reducing agent used in ...

(a) On a day when the intensity of sunlight is 1.00 kW/m2, a circular lens 0.200 m in diameter focuses light onto water in a black beaker. Two polarizing sheets of plastic are placed in front of the lens with their axes at an angle of 20.0o. Assuming the sunlight is unpolarized and the polarizers are 100% efficient, what is the initial rate of heating of the water in oC/s, assuming it is 80.0% absorbed? The aluminum beaker has a mass of 30.0 grams and contains 250 grams of water. (b) Do the polarizing filters get hot? Explain.

If you hold your Polaroid sunglasses in front of you and rotate them while looking at blue sky, you will see the sky get bright and dim. This is a clear indication that light scattered by air is partially polarized. Figure 11 helps illustrate how this happens. Since light is a transverse EM wave, it vibrates the electrons of air molecules perpendicular to the direction it is traveling. The electrons then radiate like small antennae. Since they are oscillating perpendicular to the direction of the light ray, they produce EM radiation that is polarized perpendicular to the direction of the ray. When viewing the light along a line perpendicular to the original ray, as in Figure 11, there can be no polarization in the scattered light parallel to the original ray, because that would require the original ray to be a longitudinal wave. Along other directions, a component of the other polarization can be projected along the line of sight, and the scattered light will only be partially polarized. Furthermore, multiple scattering can bring light to your eyes from other directions and can contain different polarizations.

Sep 2, 2016 — AlentejoSkies ... I bought this scope for my four year old daughter. She loves it. I don't... Pros: You can put stickers on it. You can see the ...

Linear Magnification - In the case of the apochromatic objective in Figure 1, the linear magnification is 60x, although the manufacturers produce objectives ...

Since the part of the light that is not reflected is refracted, the amount of polarization depends on the indices of refraction of the media involved. It can be shown that reflected light is completely polarized at a angle of reflection θb, given by

For applications such as absolute irradiance, the use of achromatic lenses can offer the maximum benefits. An achromatic lens helps to eliminate the unexpected “contamination” of the spectrum caused by wavelength outside of the optimal FOV.

13: (a) Light reflected at 62.5o from a gemstone in a ring is completely polarized. Can the gem be a diamond? (b) At what angle would the light be completely polarized if the gem was in water?

5: When particles scattering light are much smaller than its wavelength, the amount of scattering is proportional to 1/ λ4. Does this mean there is more scattering for small λ than large λ? How does this relate to the fact that the sky is blue? Hint: red light has a wavelength of about 650 nm while blue light has a wavelength of about 400 nm.

5: At the end of Example 1, it was stated that the intensity of polarized light is reduced to 90.0% of its original value by passing through a polarizing filter with its axis at an angle of 18.4 degrees to the direction of polarization. Verify this statement.

MODULATION, musique ... On appelle modulation au ton homonyme un changement de mode conservant la tonique (sol majeur à sol mineur par exemple). La modulation par ...

Norland Optical Adhesive 72. PDF document icon Norland Optical Adhesive 72.pdf — PDF document, 57 KB (59210 bytes). © University of Louisville.

Should I choose a chromatic or singlet collimator lens? For applications such as absolute irradiance, the use of achromatic lenses can offer the maximum benefits. An achromatic lens helps to eliminate the unexpected “contamination” of the spectrum caused by wavelength outside of the optimal FOV. Further, Hyperion Optics offers free consultation on your mechanical design, including lens mount, barrel, and, assembly housing. Contact our technical sales team today to find out the best collimating solution for your optical system.

Light is one type of electromagnetic (EM) wave. As noted earlier, EM waves are transverse waves consisting of varying electric and magnetic fields that oscillate perpendicular to the direction of propagation (see Figure 2). There are specific directions for the oscillations of the electric and magnetic fields. Polarization is the attribute that a wave’s oscillations have a definite direction relative to the direction of propagation of the wave. (This is not the same type of polarization as that discussed for the separation of charges.) Waves having such a direction are said to be polarized. For an EM wave, we define the direction of polarization to be the direction parallel to the electric field. Thus we can think of the electric field arrows as showing the direction of polarization, as in Figure 2.

Only the component of the EM wave parallel to the axis of a filter is passed. Let us call the angle between the direction of polarization and the axis of a filter θ. If the electric field has an amplitude E, then the transmitted part of the wave has an amplitude Ecosθ (see Figure 7). Since the intensity of a wave is proportional to its amplitude squared, the intensity I of the transmitted wave is related to the incident wave by

Collimatinglens

... field of view (dFOV). To calculate the dFOV, you will need to place a transparent ruler on the microscope stage and measure the dFOV under low power ...

Further, Hyperion Optics offers free consultation on your mechanical design, including lens mount, barrel, and, assembly housing. Contact our technical sales team today to find out the best collimating solution for your optical system.

By now you can probably guess that Polaroid sunglasses cut the glare in reflected light because that light is polarized. You can check this for yourself by holding Polaroid sunglasses in front of you and rotating them while looking at light reflected from water or glass. As you rotate the sunglasses, you will notice the light gets bright and dim, but not completely black. This implies the reflected light is partially polarized and cannot be completely blocked by a polarizing filter.

20241021 — Wave is said to be plane-polarized, the plane of polarization being the one that contains the propagation direction and the electric vector.

(a) At what angle will light traveling in air be completely polarized horizontally when reflected from water? (b) From glass?

Figure 6 shows the effect of two polarizing filters on originally unpolarized light. The first filter polarizes the light along its axis. When the axes of the first and second filters are aligned (parallel), then all of the polarized light passed by the first filter is also passed by the second. If the second polarizing filter is rotated, only the component of the light parallel to the second filter’s axis is passed. When the axes are perpendicular, no light is passed by the second.

The Sun and many other light sources produce waves that are randomly polarized (see Figure 4). Such light is said to be unpolarized because it is composed of many waves with all possible directions of polarization. Polaroid materials, invented by the founder of Polaroid Corporation, Edwin Land, act as a polarizing slit for light, allowing only polarization in one direction to pass through. Polarizing filters are composed of long molecules aligned in one direction. Thinking of the molecules as many slits, analogous to those for the oscillating ropes, we can understand why only light with a specific polarization can get through. The axis of a polarizing filter is the direction along which the filter passes the electric field of an EM wave (see Figure 5).

Hyperion’s custom collimators help parallelize the entrance light rays into your optical system setup, enabling you to control the field of view, collection efficiency, and spatial resolution. Our existing collimator design is responsive at UV-VIS, or VIS-NIR spectrum.

The collimating lenses of the reflector and transmission types are used in the beam transmission system to maintain the quasi-straightness of the beam between the laser resonator and the focusing optical element. The reflection type collimating lens is used in a copper full mirror, while the collimating lens of transmission type is used In zinc selenide lens.

To examine this further, consider the transverse waves in the ropes shown in Figure 3. The oscillations in one rope are in a vertical plane and are said to be vertically polarized. Those in the other rope are in a horizontal plane and are horizontally polarized. If a vertical slit is placed on the first rope, the waves pass through. However, a vertical slit blocks the horizontally polarized waves. For EM waves, the direction of the electric field is analogous to the disturbances on the ropes.

While you are undoubtedly aware of liquid crystal displays (LCDs) found in watches, calculators, computer screens, cellphones, flat screen televisions, and other myriad places, you may not be aware that they are based on polarization. Liquid crystals are so named because their molecules can be aligned even though they are in a liquid. Liquid crystals have the property that they can rotate the polarization of light passing through them by 90o. Furthermore, this property can be turned off by the application of a voltage, as illustrated in Figure 12. It is possible to manipulate this characteristic quickly and in small well-defined regions to create the contrast patterns we see in so many LCD devices.

Find Polaroid sunglasses and rotate one while holding the other still and look at different surfaces and objects. Explain your observations. What is the difference in angle from when you see a maximum intensity to when you see a minimum intensity? Find a reflective glass surface and do the same. At what angle does the glass need to be oriented to give minimum glare?

where Io is the intensity of the polarized wave before passing through the filter. (The above equation is known as Malus’s law.)

When the intensity is reduced by 90.0% it is 10% or 0.100 times its original value. That is, I = 0.100 I0. Using this information, the equation I = I0 cos2θ can be used to solve for the needed angle.

All we need to solve these problems are the indices of refraction. Air has n1 = 1.00, water has n2 = 1.333, and crown glass has n’2 = 1.520. The equation can be directly applied to find θb in each case.

2: The angle between the axes of two polarizing filters is 45.0 degrees. By how much does the second filter reduce the intensity of the light coming through the first?

The collimating lens is a common convex lens, where the diverging light enters, and the parallel light emits, and this convex lens acts as a straight line.

14: If θb is Brewster’s angle for light reflected from the top of an interface between two substances, and θb‘ is Brewster’s angle for light reflected from below, prove that θb + θb‘ = 90o..

In flat screen LCD televisions, there is a large light at the back of the TV. The light travels to the front screen through millions of tiny units called pixels (picture elements). One of these is shown in Figure 12 (a) and (b). Each unit has three cells, with red, blue, or green filters, each controlled independently. When the voltage across a liquid crystal is switched off, the liquid crystal passes the light through the particular filter. One can vary the picture contrast by varying the strength of the voltage applied to the liquid crystal.

The collimating lens can transform the optical transmission of an optical fiber into a quasi-direct light (parallel light), or parallel (approximate parallel) light to a single mode fiber.

Suppose you put on two pairs of Polaroid sunglasses with their axes at an angle of 15.0o. How much longer will it take the light to deposit a given amount of energy in your eye compared with a single pair of sunglasses? Assume the lenses are clear except for their polarizing characteristics.

How to collimatelight

3: No light passes through two perfect polarizing filters with perpendicular axes. However, if a third polarizing filter is placed between the original two, some light can pass. Why is this? Under what circumstances does most of the light pass?

Oct 22, 2024 — The meaning of FOCAL LENGTH is the distance of a focus from the surface of a lens or curved mirror.

1. The lens (mirror) with the appropriate focal length will be selected according to the required girdle radius of the small divergence Angle. The spot is basically the same size as it needs to be.

To start with your customized collimating lens design, please verify the expected spot size and focal length of your setup:

Sep 13, 2017 — And yes, this funny looking item will be known as the first magnifying glass. ... Somewhere around the late 1700s, bifocal glasses were invented.

Glass and plastic become optically active when stressed; the greater the stress, the greater the effect. Optical stress analysis on complicated shapes can be performed by making plastic models of them and observing them through crossed filters, as seen in Figure 14. It is apparent that the effect depends on wavelength as well as stress. The wavelength dependence is sometimes also used for artistic purposes.

For a point source, near collimation can be assumed so that the beam will be the “clear” aperture of the lens. If a fiber is attached to the lens, the divergence angle can be calculated depending on the height of the thread. This information allows you to calculate the spot size at a distance.

Polaroid sunglasses are familiar to most of us. They have a special ability to cut the glare of light reflected from water or glass as shown in the figure below. Polaroids have this ability because of a wave characteristic of light called polarization. What is polarization? How is it produced? What are some of its uses? The answers to these questions are related to the wave character of light.

Photographs of the sky can be darkened by polarizing filters, a trick used by many photographers to make clouds brighter by contrast. Scattering from other particles, such as smoke or dust, can also polarize light. Detecting polarization in scattered EM waves can be a useful analytical tool in determining the scattering source.

A fairly large angle between the direction of polarization and the filter axis is needed to reduce the intensity to 10.0% of its original value. This seems reasonable based on experimenting with polarizing films. It is interesting that, at an angle of 45o, the intensity is reduced to 50% of its original value (as you will show in this section’s Problems & Exercises). Note that 71.6o is 18.4o from reducing the intensity to zero, and that at an angle of 18.4o the intensity is reduced to 90.0% of its original value (as you will also show in Problems & Exercises), giving evidence of symmetry.

2. If the collimation lens refers to the alignment of the light, and adjusts the light path, then the near mirror frame is used to adjust the near field aperture and the far mirror frame is used to adjust the far field aperture. If there is a lens focusing, we should think about the relationship of the near field and far field imaging, otherwise, it will be further off.

Hyperion Optics offers economical custom design collimating lenses that can effectively correct spherical and chromatic aberrations, including singlet and chromatic lenses. Many of our clients had experiences where off-the-shelf collimators they purchased for their system do not collimate the light source perfectly, thus affecting the final system performance. To better serve clients with similar challenges when building a cost-effective system, Hyperion Optics provides free design consultation for custom collimators in both singlet and chromatic formats. Hyperion’s custom collimators help parallelize the entrance light rays into your optical system setup, enabling you to control the field of view, collection efficiency, and spatial resolution. Our existing collimator design is responsive at UV-VIS, or VIS-NIR spectrum. Aspherical collimator lens is another hot product that we offer as a cost-effective replacement for volume production. Unfortunately, brand-name aspherical lenses are not the most budget-friendly. Hyperion Optics provides reverse engineering services to help you maintain a competitive edge in the global market, oftentimes with even better system performance since our redesign aimed at optimizing the aspherical lens for your specific application. Please refer to our reverse engineering and aspherical surface production pages for more information. To start with your customized collimating lens design, please verify the expected spot size and focal length of your setup: For a point source, near collimation can be assumed so that the beam will be the “clear” aperture of the lens. If a fiber is attached to the lens, the divergence angle can be calculated depending on the height of the thread. This information allows you to calculate the spot size at a distance. Tan(Theta) = (Height of fiber)/(Focal Length) Focal Length = Height of fiber = (1/2)*core diameter Theta = divergence angle Should I choose a chromatic or singlet collimator lens? For applications such as absolute irradiance, the use of achromatic lenses can offer the maximum benefits. An achromatic lens helps to eliminate the unexpected “contamination” of the spectrum caused by wavelength outside of the optimal FOV. Further, Hyperion Optics offers free consultation on your mechanical design, including lens mount, barrel, and, assembly housing. Contact our technical sales team today to find out the best collimating solution for your optical system.

News