Apertures are also used in laser energy control, close aperture z-scan technique, diffractions/patterns, and beam cleaning.[5] Laser applications include spatial filters, Q-switching, high intensity x-ray control.

Typical ranges of apertures used in photography are about f/2.8 – f/22 or f/2 – f/16,[7] covering six stops, which may be divided into wide, middle, and narrow of two stops each, roughly (using round numbers) f/2 – f/4, f/4 – f/8, and f/8 – f/16 or (for a slower lens) f/2.8 – f/5.6, f/5.6 – f/11, and f/11 – f/22. These are not sharp divisions, and ranges for specific lenses vary.

The amount of light captured by an optical system is proportional to the area of the entrance pupil that is the object space-side image of the aperture of the system, equal to:

Despite the pres­ence of opti­cal dis­tor­tions in many lens­es, their effects are often sub­tle and hard to notice in most pho­tographs. Dis­tor­tions become most evi­dent in images that fea­ture straight lines run­ning par­al­lel and close to the edges of the frame.

Chro­mat­ic aber­ra­tions man­i­fest them­selves as fringes of colour on high-con­trast edges. They are caused by dif­fer­ent wave­lengths of light (i.e., dif­fer­ent colours) under­go­ing vary­ing degrees of refrac­tion and being focused at dif­fer­ent posi­tions as they pass through the lens. Two types of chro­mat­ic aber­ra­tion exist: axi­al (or lon­gi­tu­di­nal) and trans­verse (or lat­er­al). Axi­al chro­mat­ic aber­ra­tions are caused by dif­fer­ent wave­lengths of light focus­ing at vary­ing dis­tances from the lens. Blue-vio­let light focus­es clos­er to the lens than red, with green com­ing into focus between them. Axi­al chro­mat­ic aber­ra­tions can be min­i­mized by stop­ping down your aper­ture, which brings the wave­lengths into accept­able focus. Trans­verse chro­mat­ic aber­ra­tions occur when dif­fer­ent wave­lengths of light focus on dif­fer­ent posi­tions of the focal plane (i.e., on the image sen­sor). These issues typ­i­cal­ly occur with short-focus lens­es, par­tic­u­lar­ly ultra-wide lens­es. Trans­verse chro­mat­ic aber­ra­tions can­not be reduced by stop­ping down the aper­ture but can be effec­tive­ly min­i­mized in raw files using soft­ware like Adobe Light­room.

In optics, the aperture of an optical system (including a system consisted of a single lens) is a hole or an opening that primarily limits light propagated through the system. More specifically, the entrance pupil as the front side image of the aperture and focal length of an optical system determine the cone angle of a bundle of rays that comes to a focus in the image plane.

Aberrations 5e

Lin­ear dis­tor­tions refer to devi­a­tions from an ide­al rec­ti­lin­ear pro­jec­tion. Rec­ti­lin­ear lens­es are designed to ren­der straight ele­ments in a scene as straight lines in the image. There are three main types of dis­tor­tion: bar­rel (con­vex), pin­cush­ion (con­cave), and com­plex (some­times called ‘mous­tache’ dis­tor­tion).

Aberrations Physics

In astronomy, the opening diameter of the aperture stop (called the aperture) is a critical parameter in the design of a telescope. Generally, one would want the aperture to be as large as possible, to collect the maximum amount of light from the distant objects being imaged. The size of the aperture is limited, however, in practice by considerations of its manufacturing cost and time and its weight, as well as prevention of aberrations (as mentioned above).

In light microscopy, the word aperture may be used with reference to either the condenser (that changes the angle of light onto the specimen field), field iris (that changes the area of illumination on specimens) or possibly objective lens (forms primary images). See Optical microscope.

Unlike the aber­ra­tions men­tioned above, dis­tor­tions do not gen­er­al­ly affect image sharp­ness and can­not be min­i­mized by stop­ping down the lens. How­ev­er, bar­rel and pin­cush­ion dis­tor­tions can be effi­cient­ly cor­rect­ed using soft­ware like Adobe Light­room, and most mod­ern cam­eras auto­mat­i­cal­ly apply the appro­pri­ate cor­rec­tions when tak­ing a pic­ture. Cor­rect­ing com­plex dis­tor­tions is also pos­si­ble but requires a cor­rec­tion pro­file that accu­rate­ly maps the struc­ture of the warped geom­e­try.

Aberrations in lenses

A device called a diaphragm usually serves as the aperture stop and controls the aperture (the opening of the aperture stop). The diaphragm functions much like the iris of the eye – it controls the effective diameter of the lens opening (called pupil in the eyes). Reducing the aperture size (increasing the f-number) provides less light to sensor and also increases the depth of field (by limiting the angle of cone of image light reaching the sensor), which describes the extent to which subject matter lying closer than or farther from the actual plane of focus appears to be in focus. In general, the smaller the aperture (the larger the f-number), the greater the distance from the plane of focus the subject matter may be while still appearing in focus.

Aberrations dredge

If two cameras of different format sizes and focal lengths have the same angle of view, and the same aperture area, they gather the same amount of light from the scene. In that case, the relative focal-plane illuminance, however, would depend only on the f-number N, so it is less in the camera with the larger format, longer focal length, and higher f-number. This assumes both lenses have identical transmissivity.

For some lenses, including a few long telephotos, lenses mounted on bellows, and perspective-control and tilt/shift lenses, the mechanical linkage was impractical,[16] and automatic aperture control was not provided. Many such lenses incorporated a feature known as a "preset" aperture,[16][17] which allows the lens to be set to working aperture and then quickly switched between working aperture and full aperture without looking at the aperture control. A typical operation might be to establish rough composition, set the working aperture for metering, return to full aperture for a final check of focus and composition, and focusing, and finally, return to working aperture just before exposure. Although slightly easier than stopped-down metering, operation is less convenient than automatic operation. Preset aperture controls have taken several forms; the most common has been the use of essentially two lens aperture rings, with one ring setting the aperture and the other serving as a limit stop when switching to working aperture. Examples of lenses with this type of preset aperture control are the Nikon PC Nikkor 28 mm f/3.5 and the SMC Pentax Shift 6×7 75 mm f/4.5. The Nikon PC Micro-Nikkor 85 mm f/2.8D lens incorporates a mechanical pushbutton that sets working aperture when pressed and restores full aperture when pressed a second time.

Coma refers to a lens’s reduced abil­i­ty to ren­der a sharp point image that orig­i­nates away from the lens axis. As the name sug­gests, the result­ing image of such a point source has a shape resem­bling a comet’s tail. Coma can be min­i­mized by stop­ping down the aper­ture.

Spher­i­cal aber­ra­tions result in soft-focused images that lack fine con­trast. They occur when light pass­ing through the edges of a lens focus­es clos­er to the lens than light pass­ing through its cen­tre. In most lens­es, spher­i­cal aber­ra­tion is con­sid­ered an unde­sir­able tech­ni­cal flaw. How­ev­er, in the past, con­trolled spher­i­cal aber­ra­tion was inten­tion­al­ly used in “soft-focus” por­trait lens­es. This type of aber­ra­tion can be reduced by stop­ping down the aper­ture.

In exceptional circumstances lenses can have even wider apertures with f-numbers smaller than 1.0; see lens speed: fast lenses for a detailed list. For instance, both the current Leica Noctilux-M 50mm ASPH and a 1960s-era Canon 50mm rangefinder lens have a maximum aperture of f/0.95.[10] Cheaper alternatives began appearing in the early 2010s, such as the Cosina Voigtländer f/0.95 Nokton (several in the 10.5–60 mm range) and f/0.8 (29 mm) Super Nokton manual focus lenses in the for the Micro Four-Thirds System,[11] and the Venus Optics (Laowa) Argus 35 mm f/0.95.[8]

In some contexts, especially in photography and astronomy, aperture refers to the opening diameter of the aperture stop through which light can pass. For example, in a telescope, the aperture stop is typically the edges of the objective lens or mirror (or of the mount that holds it). One then speaks of a telescope as having, for example, a 100-centimetre (39 in) aperture. The aperture stop is not necessarily the smallest stop in the system. Magnification and demagnification by lenses and other elements can cause a relatively large stop to be the aperture stop for the system. In astrophotography, the aperture may be given as a linear measure (for example, in inches or millimetres) or as the dimensionless ratio between that measure and the focal length. In other photography, it is usually given as a ratio.

Aperture Science, a fictional company in the Portal fictional universe, is named after the optical system. The company's logo heavily features an aperture in its logo, and has come to symbolize the series, fictional company, and the Aperture Science Laboratories Computer-Aided Enrichment Center that the game series takes place in.[33]

The word aperture is also used in other contexts to indicate a system which blocks off light outside a certain region. In astronomy, for example, a photometric aperture around a star usually corresponds to a circular window around the image of a star within which the light intensity is assumed.[4]

Where the two equivalent forms are related via the f-number N = f / D, with focal length f and entrance pupil diameter D.

Optically, as a lens is stopped down, the defocus blur at the Depth of Field (DOF) limits decreases but diffraction blur increases. The presence of these two opposing factors implies a point at which the combined blur spot is minimized (Gibson 1975, 64); at that point, the f-number is optimal for image sharpness, for this given depth of field[22] – a wider aperture (lower f-number) causes more defocus, while a narrower aperture (higher f-number) causes more diffraction.

However, modern optical research concludes that sensor size does not actually play a part in the depth of field in an image.[30] An aperture's f-number is not modified by the camera's sensor size because it is a ratio that only pertains to the attributes of the lens. Instead, the higher crop factor that comes as a result of a smaller sensor size means that, in order to get an equal framing of the subject, the photo must be taken from further away, which results in a less blurry background, changing the perceived depth of field. Similarly, a smaller sensor size with an equivalent aperture will result in a darker image because of the pixel density of smaller sensors with equivalent megapixels. Every photosite on a camera's sensor requires a certain amount of surface area that is not sensitive to light, a factor that results in differences in pixel pitch and changes in the signal-noise ratio. However, neither the changed depth of field,[31] nor the perceived change in light sensitivity [32] are a result of the aperture. Instead, equivalent aperture can be seen as a rule of thumb to judge how changes in sensor size might affect an image, even if qualities like pixel density and distance from the subject are the actual causes of changes in the image.

An optical system typically has many openings or structures that limit ray bundles (ray bundles are also known as pencils of light). These structures may be the edge of a lens or mirror, or a ring or other fixture that holds an optical element in place or may be a special element such as a diaphragm placed in the optical path to limit the light admitted by the system. In general, these structures are called stops,[2] and the aperture stop is the stop that primarily determines the cone of rays that an optical system accepts (see entrance pupil). As a result, it also determines the ray cone angle and brightness at the image point (see exit pupil). The aperture stop generally depends on the object point location; on-axis object points at different object planes may have different aperture stops, and even object points at different lateral locations at the same object plane may have different aperture stops (vignetted).[3] In practice, many object systems are designed to have a single aperture stop at designed working distance and field of view.

While optimal aperture can be determined mechanically, how much sharpness is required depends on how the image will be used – if the final image is viewed under normal conditions (e.g., an 8″×10″ image viewed at 10″), it may suffice to determine the f-number using criteria for minimum required sharpness, and there may be no practical benefit from further reducing the size of the blur spot. But this may not be true if the final image is viewed under more demanding conditions, e.g., a very large final image viewed at normal distance, or a portion of an image enlarged to normal size (Hansma 1996). Hansma also suggests that the final-image size may not be known when a photograph is taken, and obtaining the maximum practicable sharpness allows the decision to make a large final image to be made at a later time; see also critical sharpness.

Zoom lenses typically have a maximum relative aperture (minimum f-number) of f/2.8 to f/6.3 through their range. High-end lenses will have a constant aperture, such as f/2.8 or f/4, which means that the relative aperture will stay the same throughout the zoom range. A more typical consumer zoom will have a variable maximum relative aperture since it is harder and more expensive to keep the maximum relative aperture proportional to the focal length at long focal lengths; f/3.5 to f/5.6 is an example of a common variable aperture range in a consumer zoom lens.

In digital photography, the 35mm-equivalent aperture range is sometimes considered to be more important than the actual f-number. Equivalent aperture is the f-number adjusted to correspond to the f-number of the same size absolute aperture diameter on a lens with a 35mm equivalent focal length. Smaller equivalent f-numbers are expected to lead to higher image quality based on more total light from the subject, as well as lead to reduced depth of field. For example, a Sony Cyber-shot DSC-RX10 uses a 1" sensor, 24 – 200 mm with maximum aperture constant along the zoom range; f/2.8 has equivalent aperture range f/7.6, which is a lower equivalent f-number than some other f/2.8 cameras with smaller sensors.[29]

If this guide has been help­ful, con­sid­er using these affil­i­ate links to make your next pur­chase. It won’t cost you extra, and it helps me con­tin­ue cre­at­ing free con­tent! For new pho­tog­ra­phy gear, check out Ado­ra­ma, Hen­ry’s, or eBay. And if you’re shop­ping for any­thing on Ama­zon, using this link sup­ports my work, too. For edit­ing, con­sid­er sub­scrib­ing to Adobe Light­room Clas­sic. Thanks for your sup­port!

Aberrations examples

Professional lenses for some movie cameras have f-numbers as small as f/0.75. Stanley Kubrick's film Barry Lyndon has scenes shot by candlelight with a NASA/Zeiss 50mm f/0.7,[12] the fastest lens in film history. Beyond the expense, these lenses have limited application due to the correspondingly shallower depth of field (DOF) – the scene must either be shallow, shot from a distance, or will be significantly defocused, though this may be the desired effect.

Though as early as 1933 Torkel Korling had invented and patented for the Graflex large format reflex camera an automatic aperture control,[14] not all early 35mm single lens reflex cameras had the feature. With a small aperture, this darkened the viewfinder, making viewing, focusing, and composition difficult.[15] Korling's design enabled full-aperture viewing for accurate focus, closing to the pre-selected aperture opening when the shutter was fired and simultaneously synchronising the firing of a flash unit. From 1956 SLR camera manufacturers separately developed automatic aperture control (the Miranda T 'Pressure Automatic Diaphragm', and other solutions on the Exakta Varex IIa and Praktica FX2) allowing viewing at the lens's maximum aperture, stopping the lens down to the working aperture at the moment of exposure, and returning the lens to maximum aperture afterward.[16] The first SLR cameras with internal ("through-the-lens" or "TTL") meters (e.g., the Pentax Spotmatic) required that the lens be stopped down to the working aperture when taking a meter reading. Subsequent models soon incorporated mechanical coupling between the lens and the camera body, indicating the working aperture to the camera for exposure while allowing the lens to be at its maximum aperture for composition and focusing;[16] this feature became known as open-aperture metering.

Aber­ra­tions are the pri­ma­ry cause of reduced acu­ity in lens­es that are cor­rect­ly focused. There are five types you should know about, chro­mat­ic aber­ra­tion, spher­i­cal aber­ra­tion, cur­va­ture of field, coma, and astig­ma­tism.

In many living optical systems, the eye consists of an iris which adjusts the size of the pupil, through which light enters. The iris is analogous to the diaphragm, and the pupil (which is the adjustable opening in the iris) the aperture. Refraction in the cornea causes the effective aperture (the entrance pupil in optics parlance) to differ slightly from the physical pupil diameter. The entrance pupil is typically about 4 mm in diameter, although it can range from as narrow as 2 mm (f/8.3) in diameter in a brightly lit place to 8 mm (f/2.1) in the dark as part of adaptation. In rare cases in some individuals are able to dilate their pupils even beyond 8 mm (in scotopic lighting, close to the physical limit of the iris. In humans, the average iris diameter is about 11.5 mm,[23] which naturally influences the maximal size of the pupil as well, where larger iris diameters would typically have pupils which are able to dilate to a wider extreme than those with smaller irises. Maximum dilated pupil size also decreases with age.

Spherical aberration

A usual expectation is that the term aperture refers to the opening of the aperture stop, but in reality, the term aperture and the aperture stop are mixed in use. Sometimes even stops that are not the aperture stop of an optical system are also called apertures. Contexts need to clarify these terms.

The focal length value is not required when comparing two lenses of the same focal length; a value of 1 can be used instead, and the other factors can be dropped as well, leaving area proportion to the reciprocal square of the f-number N.

Lenses with apertures opening f/2.8 or wider are referred to as "fast" lenses, although the specific point has changed over time (for example, in the early 20th century aperture openings wider than f/6 were considered fast.[9] The fastest lenses for the common 35 mm film format in general production have apertures of f/1.2 or f/1.4, with more at f/1.8 and f/2.0, and many at f/2.8 or slower; f/1.0 is unusual, though sees some use. When comparing "fast" lenses, the image format used must be considered. Lenses designed for a small format such as half frame or APS-C need to project a much smaller image circle than a lens used for large format photography. Thus the optical elements built into the lens can be far smaller and cheaper.

Opti­cal aber­ra­tions are imper­fec­tions in the way lens­es con­verge rays of light to a point. These lens aber­ra­tions can be cat­e­go­rized into two types: the imper­fect con­ver­gence of light to a focused point (affect­ing sharp­ness) and flawed geo­met­ric pro­jec­tion of the scene (man­i­fest­ing as dis­tor­tions or warp­ing). When design­ing a lens, opti­cal engi­neers face a series of com­plex com­pro­mis­es to min­i­mize aber­ra­tions. Since no lens is per­fect, engi­neers must make the best pos­si­ble trade-offs with­in the con­straints of the intend­ed use, fea­tures, pro­duc­tion costs, and tar­get price. While there is lit­tle you can do about aber­ra­tions in your lens­es (apart from stop­ping down the aper­ture), it’s help­ful to under­stand them when con­sid­er­ing a new pur­chase. More impor­tant­ly, as a pho­tog­ra­ph­er, being aware of your lens­es’ lim­i­ta­tions allows you to lever­age their strengths and avoid empha­siz­ing their weak­ness­es.

The aperture stop is an important element in most optical designs. Its most obvious feature is that it limits the amount of light that can reach the image/film plane. This can be either unavoidable due to the practical limit of the aperture stop size, or deliberate to prevent saturation of a detector or overexposure of film. In both cases, the size of the aperture stop determines the amount of light admitted by an optical system. The aperture stop also affects other optical system properties:

For example, film grain is quantified as graininess via a measurement of film density fluctuations as seen through a 0.048 mm sampling aperture.

Aberrations in optics

The aperture stop of a photographic lens can be adjusted to control the amount of light reaching the film or image sensor. In combination with variation of shutter speed, the aperture size will regulate the film's or image sensor's degree of exposure to light. Typically, a fast shutter will require a larger aperture to ensure sufficient light exposure, and a slow shutter will require a smaller aperture to avoid excessive exposure.

The iris controls the size of the pupil via two complementary sets muscles, the sphincter and dilator muscles, which are innervated by the parasympathetic and sympathetic nervous systems respectively, and act to induce pupillary constriction and dilation respectively. The state of the pupil is closely influenced by various factors, primarily light (or absence of light), but also by emotional state, interest in the subject of attention, arousal, sexual stimulation,[24] physical activity,[25] accommodation state,[26] and cognitive load.[27] The field of view is not affected by the size of the pupil.

By contrast, the minimum aperture does not depend on the focal length – it is limited by how narrowly the aperture closes, not the lens design – and is instead generally chosen based on practicality: very small apertures have lower sharpness due to diffraction at aperture edges, while the added depth of field is not generally useful, and thus there is generally little benefit in using such apertures. Accordingly, DSLR lens typically have minimum aperture of f/16, f/22, or f/32, while large format may go down to f/64, as reflected in the name of Group f/64. Depth of field is a significant concern in macro photography, however, and there one sees smaller apertures. For example, the Canon MP-E 65mm can have effective aperture (due to magnification) as small as f/96. The pinhole optic for Lensbaby creative lenses has an aperture of just f/177.[13]

Optimal aperture depends both on optics (the depth of the scene versus diffraction), and on the performance of the lens.

Astig­ma­tism caus­es a sub­ject point locat­ed away from the lens axis to appear as a high­ly stretched oval at one focus dis­tance, as a high­ly stretched oval per­pen­dic­u­lar to the first at anoth­er focus dis­tance, and as a blur­ry disc in between. There are two types: tan­gen­tial and sagit­tal astig­ma­tism. In tan­gen­tial astig­ma­tism, the elon­ga­tion of sub­ject points occurs along an imag­i­nary line radi­at­ing from the opti­cal axis. In sagit­tal astig­ma­tism, the elon­ga­tion is per­pen­dic­u­lar to this line, appear­ing as if it fol­lows imag­i­nary rings cir­cling the opti­cal axis. Like most oth­er types of aber­ra­tion, astig­ma­tism can be reduced by stop­ping down the aper­ture.

Some individuals are also able to directly exert manual and conscious control over their iris muscles and hence are able to voluntarily constrict and dilate their pupils on command.[28] However, this ability is rare and potential use or advantages are unclear.

Bar­rel and pin­cush­ion dis­tor­tions are often asso­ci­at­ed with spe­cif­ic focal lengths. For instance, short-focus lens­es tend to exhib­it bar­rel dis­tor­tion, while long-focus lens­es are more prone to pin­cush­ion dis­tor­tion. Zoom lens­es com­mon­ly show both types of dis­tor­tion, with bar­rel dis­tor­tion appear­ing at the wide end and tran­si­tion­ing to pin­cush­ion dis­tor­tion at the tele­pho­to end of the zoom range. This behav­iour is con­sis­tent regard­less of the absolute focal length of the zoom lens. For exam­ple, both 16–35 mm and 70–200 mm lens­es will show bar­rel dis­tor­tion at 16 mm and 70 mm, respec­tive­ly, and pin­cush­ion dis­tor­tion at 35 mm and 200 mm, respec­tive­ly.

The terms scanning aperture and sampling aperture are often used to refer to the opening through which an image is sampled, or scanned, for example in a Drum scanner, an image sensor, or a television pickup apparatus. The sampling aperture can be a literal optical aperture, that is, a small opening in space, or it can be a time-domain aperture for sampling a signal waveform.

Aberrations bg3

The specifications for a given lens typically include the maximum and minimum aperture (opening) sizes, for example, f/0.95 – f/22. In this case, f/0.95 is currently the maximum aperture (the widest opening on a full-frame format for practical use[8]), and f/22 is the minimum aperture (the smallest opening). The maximum aperture tends to be of most interest and is always included when describing a lens. This value is also known as the lens "speed", as it affects the exposure time. As the aperture area is proportional to the light admitted by a lens or an optical system, the aperture diameter is proportional to the square root of the light admitted, and thus inversely proportional to the square root of required exposure time, such that an aperture of f/2 allows for exposure times one quarter that of f/4. (f/2 is 4 times larger than f/4 in the aperture area.)

As a matter of performance, lenses often do not perform optimally when fully opened, and thus generally have better sharpness when stopped down some – this is sharpness in the plane of critical focus, setting aside issues of depth of field. Beyond a certain point, there is no further sharpness benefit to stopping down, and the diffraction occurred at the edges of the aperture begins to become significant for imaging quality. There is accordingly a sweet spot, generally in the f/4 – f/8 range, depending on lens, where sharpness is optimal, though some lenses are designed to perform optimally when wide open. How significant this varies between lenses, and opinions differ on how much practical impact this has.

Canon EF lenses, introduced in 1987,[18] have electromagnetic diaphragms,[19] eliminating the need for a mechanical linkage between the camera and the lens, and allowing automatic aperture control with the Canon TS-E tilt/shift lenses. Nikon PC-E perspective-control lenses,[20] introduced in 2008, also have electromagnetic diaphragms,[21] a feature extended to their E-type range in 2013.

In addition to an aperture stop, a photographic lens may have one or more field stops, which limit the system's field of view. When the field of view is limited by a field stop in the lens (rather than at the film or sensor) vignetting results; this is only a problem if the resulting field of view is less than was desired.

Aperture priority is a semi-automatic shooting mode used in cameras. It permits the photographer to select an aperture setting and let the camera decide the shutter speed and sometimes also ISO sensitivity for the correct exposure. This is also referred to as Aperture Priority Auto Exposure, A mode, AV mode (aperture-value mode), or semi-auto mode.[6]

The lens aperture is usually specified as an f-number, the ratio of focal length to effective aperture diameter (the diameter of the entrance pupil). A lens typically has a set of marked "f-stops" that the f-number can be set to. A lower f-number denotes a greater aperture which allows more light to reach the film or image sensor. The photography term "one f-stop" refers to a factor of √2 (approx. 1.41) change in f-number which corresponds to a √2 change in aperture diameter, which in turn corresponds to a factor of 2 change in light intensity (by a factor 2 change in the aperture area).

Field Cur­va­ture occurs when a lens can­not focus a flat sub­ject per­pen­dic­u­lar to its opti­cal axis onto a flat image plane. To some extent, this aber­ra­tion is not prob­lem­at­ic for por­trait, land­scape, or street pho­tog­ra­phy; how­ev­er, it is high­ly unde­sir­able in fields that fea­ture promi­nent flat planes, such as archi­tec­tur­al, tech­ni­cal, and macro pho­tog­ra­phy. The effects of field cur­va­ture can be reduced by stop­ping down the aper­ture.