I have tried acrylic, glass and crystal from the local glass cutter, but I can't get good results from any of those materials.

Infraredtransparent materialschart

However, your problem is probably that part of the light gets reflected at each of the surfaces. This is unavoidable, though it can be reduced by some anti-reflective coatings, but those are not available off-the-shelf as they need to be designed according to material and wavelength.

If I am correct, then the solution is fairly easy. You simply need to tilt the transparent material at a fairly steep angle so that the reflected light is sent to a part of the enclosure where you can put a material which strongly absorbs IR. Exactly how steep the angle needs to be depends on the details of the emitted IR pattern and the position of the screen, but I suspect that it will need to be at least 25°. If you tilt the material all the way to ~55° then you may be able to take advantage of Brewster's angle to significantly reduce the amount of reflected light, but the effectiveness depends on the polarization state of the emitted light and the direction of the tilt.

As jpa points out, the issue is not with the transparency of the materials that you are considering. I suspect that the issue is most likely caused by light being reflected directly from the IR emitter into the camera.

IR transparentplastic

What istransparentto infrared light

There are jobs with lasers in medicine (cosmetic and eye surgery), industry (cutting and welding), defense (marking targets and defending against missiles), and ...

The best result I got was when I stuck the pane flush to the Kinect's front, otherwise the IR camera just can't see anything. However, technically I can't do that because I need to allow the Kinect to tilt, and I can't have the pane always flush to the Kinect.

Fresnel lenses are widely used for camera field lenses, OHP condenser lenses, and rear projection screens. NTKJ manufactures and sells not only off-the-shelf ...

Infrared plastic

The intensity of light specularly reflected from a surface very close to the camera will be orders of magnitude brighter than the faint amount of light diffusely reflected from clothing and other objects which are much farther away. This will saturate the image sensor in the IR camera and make it impossible to see the IR pattern from other objects. Imagine trying to see the light of a small LED through a 100 W light bulb.

IR transparentglass

Designed as an economical lighting solution for the logistics industry, the EFFI-Flex-LG combines ultra-high power with the necessary flexibility any ...

IRabsorbing material

I am trying to build a protective enclosure for Microsoft's Kinect v2, which emits (and perceives) IR in the 827–850 nm range. In order to fully enclose the device without blocking those signals, I need some transparent and hard material that will let infrared pass through.

Stack Exchange network consists of 183 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

IR transparentliquids

About Us ... At Eye See You Eye Care Centre, we provide our patients with access to state-of-the-art facilities along with the most experienced and dedicated ...

Further problems will be caused by the refraction, which will distort the path of the light. This may interfere with the calibration and focusing of the Kinect's optical parts.

Jan 21, 2024 — After having determined the interference pattern associated with two slits, it makes one wonder what would happen if many more (equally-spaced) ...

ZoomText is the most popular screen magnifier for Windows. Windows also has a built-in magnifier that can be turned on through ease of access settings.

Firebird Optics has filters for multiple different applications from managing light to glassblowing eyewear to fluorescence filters for DNA analyzers. We ...

How to calculate field of view ? Once you've taken note of the eyepiece magnification, field number and objective lens magnification number, ...

The objective lens is used to change the focal distance from an object to the lens. Should you have a microscope in focus on an object and the ...

Oct 24, 2024 — Polarization, property of certain electromagnetic radiations in which the direction and magnitude of the vibrating electric field are ...