UVB photons can cause direct DNA damage. UVB radiation excites DNA molecules in skin cells, causing aberrant covalent bonds to form between adjacent pyrimidine bases, producing a dimer. Most UV-induced pyrimidine dimers in DNA are removed by the process known as nucleotide excision repair that employs about 30 different proteins.[62] Those pyrimidine dimers that escape this repair process can induce a form of programmed cell death (apoptosis) or can cause DNA replication errors leading to mutation.[citation needed]

Some animals, including birds, reptiles, and insects such as bees, can see near-ultraviolet wavelengths. Many fruits, flowers, and seeds stand out more strongly from the background in ultraviolet wavelengths as compared to human color vision. Scorpions glow or take on a yellow to green color under UV illumination, thus assisting in the control of these arachnids. Many birds have patterns in their plumage that are invisible at usual wavelengths but observable in ultraviolet, and the urine and other secretions of some animals, including dogs, cats, and human beings, are much easier to spot with ultraviolet. Urine trails of rodents can be detected by pest control technicians for proper treatment of infested dwellings.

In ultraviolet astronomy, measurements are used to discern the chemical composition of the interstellar medium, and the temperature and composition of stars. Because the ozone layer blocks many UV frequencies from reaching telescopes on the surface of the Earth, most UV observations are made from space.[citation needed]

Surface Imperfections: Achieving high surface quality in aspheric lenses can be more difficult compared to spherical lenses. The non-spherical surface profile of aspheric lenses makes them more susceptible to surface irregularities, such as scratches and imperfections. Careful handling and quality control are necessary to ensure optimal surface quality.

An aspheric lens is a type of lens that has a non-spherical surface profile, meaning it does not have a constant curvature across its entire surface. This unique design allows aspheric lenses to correct for spherical aberrations, resulting in improved image quality and reduced optical aberrations.

Another method for producing polymer-based asphere is injection molding process. The molten polymer is injected into a precision mold, cooled down, and then released as a finished lens. • Advantages: Cost-effective in mass production and low cost per unit. • Use Cases: Could be used to make eyeglasses or contact lenses from various materials.

The evolution of early reproductive proteins and enzymes is attributed in modern models of evolutionary theory to ultraviolet radiation. UVB causes thymine base pairs next to each other in genetic sequences to bond together into thymine dimers, a disruption in the strand that reproductive enzymes cannot copy. This leads to frameshifting during genetic replication and protein synthesis, usually killing the cell. Before formation of the UV-blocking ozone layer, when early prokaryotes approached the surface of the ocean, they almost invariably died out. The few that survived had developed enzymes that monitored the genetic material and removed thymine dimers by nucleotide excision repair enzymes. Many enzymes and proteins involved in modern mitosis and meiosis are similar to repair enzymes, and are believed to be evolved modifications of the enzymes originally used to overcome DNA damages caused by UV.[122]

Compact and Lightweight Design: Aspheric lenses can replace multiple spherical lenses, reducing the number of optical elements required in an optical system. This compact design not only saves space but also reduces the weight of devices such as cameras and eyewear. The lightweight nature of aspheric lenses enhances user comfort and portability.

Interferometry and Profilometry: Interferometric methods, such as white light interferometry and phase-shifting interferometry, are used to measure the surface shape and deviations from the desired aspheric profile. Profilometers, including contact and non-contact types, are used to measure surface roughness, waviness, and form errors. These measurements help assess the surface quality and ensure compliance with the desired specifications.

UV/Vis spectroscopy is widely used as a technique in chemistry to analyze chemical structure, the most notable one being conjugated systems. UV radiation is often used to excite a given sample where the fluorescent emission is measured with a spectrofluorometer. In biological research, UV radiation is used for quantification of nucleic acids or proteins. In environmental chemistry, UV radiation could also be used to detect Contaminants of emerging concern in water samples.[99]

Diamond turning is an advanced manufacturing process that uses diamond cutting tools to shape lens materials with exceptional accuracy. Prototype development or use of non-moldable materials are some examples where this method can be useful for. • Advantages: Offers flexibility in terms of both material choice and design plus affords great precision. • Use Cases: Used when producing infrared optics or creating high-precision custom lens shapes.

Using multi-spectral imaging it is possible to read illegible papyrus, such as the burned papyri of the Villa of the Papyri or of Oxyrhynchus, or the Archimedes palimpsest. The technique involves taking pictures of the illegible document using different filters in the infrared or ultraviolet range, finely tuned to capture certain wavelengths of light. Thus, the optimum spectral portion can be found for distinguishing ink from paper on the papyrus surface.

Protective eyewear is beneficial to those exposed to ultraviolet radiation. Since light can reach the eyes from the sides, full-coverage eye protection is usually warranted if there is an increased risk of exposure, as in high-altitude mountaineering. Mountaineers are exposed to higher-than-ordinary levels of UV radiation, both because there is less atmospheric filtering and because of reflection from snow and ice.[84][85] Ordinary, untreated eyeglasses give some protection. Most plastic lenses give more protection than glass lenses, because, as noted above, glass is transparent to UVA and the common acrylic plastic used for lenses is less so. Some plastic lens materials, such as polycarbonate, inherently block most UV.[86]

The photons of ultraviolet have greater energy than those of visible light, from about 3.1 to 12 electron volts, around the minimum energy required to ionize atoms. Although long-wavelength ultraviolet is not considered an ionizing radiation because its photons lack sufficient energy, it can induce chemical reactions and cause many substances to glow or fluoresce. Many practical applications, including chemical and biological effects, are derived from the way that UV radiation can interact with organic molecules. These interactions can involve absorption or adjusting energy states in molecules, but do not necessarily involve heating. [citation needed] Short-wave ultraviolet light is ionizing radiation. Consequently, short-wave UV damages DNA and sterilizes surfaces with which it comes into contact.

UV light (specifically, UVB) causes the body to produce vitamin D,[48] which is essential for life. Humans need some UV radiation to maintain adequate vitamin D levels. According to the World Health Organization:[49]

Ultraviolet absorbers are molecules used in organic materials (polymers, paints, etc.) to absorb UV radiation to reduce the UV degradation (photo-oxidation) of a material. The absorbers can themselves degrade over time, so monitoring of absorber levels in weathered materials is necessary.[citation needed]

What is asphericallens used for

Production of aspheric lenses is a very careful process that involves advanced technology and precise engineering. It starts with raw material and goes through several stages till the final product-a detailed guide on making an aspheric lens highlighting the most crucial steps that guarantee high quality lenses.

Aspheric lenses, with their unique and varied anatomical features, present a significant advancement in optical technology.  Unlike their spherical counterparts that maintain a constant radius of curvature, aspheric lenses boast a radius that changes according to a specific mathematical equation.  This equation, often a conic section or an aspheric polynomial, is pivotal in defining the lens’s surface shape, enabling it to correct aberrations more precisely than a spherical lens.

Direct UV-emitting laser diodes are available at 375 nm.[42] UV diode-pumped solid state lasers have been demonstrated using cerium-doped lithium strontium aluminum fluoride crystals (Ce:LiSAF), a process developed in the 1990s at Lawrence Livermore National Laboratory.[43] Wavelengths shorter than 325 nm are commercially generated in diode-pumped solid-state lasers. Ultraviolet lasers can also be made by applying frequency conversion to lower-frequency lasers.[citation needed]

Ultraviolet radiation is used for very fine resolution photolithography, a procedure wherein a chemical called a photoresist is exposed to UV radiation that has passed through a mask. The exposure causes chemical reactions to occur in the photoresist. After removal of unwanted photoresist, a pattern determined by the mask remains on the sample. Steps may then be taken to "etch" away, deposit on or otherwise modify areas of the sample where no photoresist remains.

Aspheric lenses have revolutionized the field of optics with their ability to correct spherical aberrations and improve optical performance. In this comprehensive guide, we delve into the world of aspheric lenses, including glass lens and plastic aspheric lenses, their advantages, manufacturing methods, specifications, and applications. Whether you’re a photographer using a camera lens, a scientist, or an engineer, understanding aspheric lenses and the optical axis is crucial in optimizing your optical systems.

Perennial news features for many television news organizations involve an investigative reporter using a similar device to reveal unsanitary conditions in hotels, public toilets, hand rails, and such.[97][98]

Revolutionary Curing Method: Say goodbye to waiting around for UV light curing! With our UV flashlight, you can cure with flexibility and speed.

Sensitive polymers include thermoplastics and speciality fibers like aramids. UV absorption leads to chain degradation and loss of strength at sensitive points in the chain structure. Aramid rope must be shielded with a sheath of thermoplastic if it is to retain its strength.[citation needed]

Improved Light Transmission: Aspheric lenses have improved light transmission due to their optimized surface profile. This results in higher light throughput, allowing more light to reach the image sensor or retina. Improved light transmission enhances overall image brightness and quality, particularly in low-light conditions.

'Black light' incandescent lamps are also made from an incandescent light bulb with a filter coating which absorbs most visible light. Halogen lamps with fused quartz envelopes are used as inexpensive UV light sources in the near UV range, from 400 to 300 nm, in some scientific instruments. Due to its black-body spectrum a filament light bulb is a very inefficient ultraviolet source, emitting only a fraction of a percent of its energy as UV.[citation needed]

To help prevent counterfeiting of currency, or forgery of important documents such as driver's licenses and passports, the paper may include a UV watermark or fluorescent multicolor fibers that are visible under ultraviolet light. Postage stamps are tagged with a phosphor that glows under UV rays to permit automatic detection of the stamp and facing of the letter.

UVB phototherapy does not require additional medications or topical preparations for the therapeutic benefit; only the exposure is needed. However, phototherapy can be effective when used in conjunction with certain topical treatments such as anthralin, coal tar, and vitamin A and D derivatives, or systemic treatments such as methotrexate and Soriatane.[119]

Photobiology is the scientific study of the beneficial and harmful interactions of non-ionizing radiation in living organisms, conventionally demarcated around 10 eV, the first ionization energy of oxygen. UV ranges roughly from 3 to 30 eV in energy. Hence photobiology entertains some, but not all, of the UV spectrum.

Pulsed light (PL) is a technique of killing microorganisms on surfaces using pulses of an intense broad spectrum, rich in UVC between 200 and 280 nm. Pulsed light works with xenon flash lamps that can produce flashes several times per second. Disinfection robots use pulsed UV.[114]

Unlike traditional spherical lenses, which have the same curvature across their surface, aspheric lenses have a varying curvature that follows a specific mathematical equation. This equation determines the shape of the lens surface and allows for precise correction of aberrations.

Diamond turning comes into play with highly accurate aspherical lenses. It uses a diamond-tipped tool to carve away nanometer by nanometer until it reaches the aspherical shape of the lens.

Because of its ability to cause chemical reactions and excite fluorescence in materials, ultraviolet radiation has a number of applications. The following table[87] gives some uses of specific wavelength bands in the UV spectrum.

In some types of nondestructive testing UV stimulates fluorescent dyes to highlight defects in a broad range of materials. These dyes may be carried into surface-breaking defects by capillary action (liquid penetrant inspection) or they may be bound to ferrite particles caught in magnetic leakage fields in ferrous materials (magnetic particle inspection).

The lower wavelength limit of the visible spectrum is conventionally taken as 400 nm, so ultraviolet rays are not visible to humans, although people can sometimes perceive light at shorter wavelengths than this.[4] Insects, birds, and some mammals can see near-UV (NUV), i.e., slightly shorter wavelengths than what humans can see.[5]

Aspheric lenses glasses

Corona discharge on electrical apparatus can be detected by its ultraviolet emissions. Corona causes degradation of electrical insulation and emission of ozone and nitrogen oxide.[89]

The antimicrobial effectiveness of filtered far-UVC (222 nm) light on a range of pathogens, including bacteria and fungi showed inhibition of pathogen growth, and since it has lesser harmful effects, it provides essential insights for reliable disinfection in healthcare settings, such as hospitals and long-term care homes.[115] UVC has also been shown to be effective at degrading SARS-CoV-2 virus.[116]

Oct 2, 2013 — Divergence angle would be ∼λ/d=532nm/100μm∼0.3∘. If you try doing the same with a red laser pointer, you'll see that its light diverges quite ...

The cheaper and more common 395 nm UV LEDs are much closer to the visible spectrum, and give off a purple color. Other UV LEDs deeper into the spectrum do not emit as much visible light.[38] LEDs are used for applications such as UV curing applications, charging glow-in-the-dark objects such as paintings or toys, and lights for detecting counterfeit money and bodily fluids. UV LEDs are also used in digital print applications and inert UV curing environments. Power densities approaching 3 W/cm2 (30 kW/m2) are now possible, and this, coupled with recent developments by photo-initiator and resin formulators, makes the expansion of LED cured UV materials likely.[citation needed]

Ultraviolet radiation is used in several food processes to kill unwanted microorganisms. UV can be used to pasteurize fruit juices by flowing the juice over a high-intensity ultraviolet source. The effectiveness of such a process depends on the UV absorbance of the juice.

Profilometry: Profilometers, including contact and non-contact types, are used to measure surface roughness, waviness, and form errors. These measurements help assess the surface quality and ensure compliance with the desired specifications.

Other applications include the authentication of various collectibles and art, and detecting counterfeit currency. Even materials not specially marked with UV sensitive dyes may have distinctive fluorescence under UV exposure or may fluoresce differently under short-wave versus long-wave ultraviolet.

Aspheric lenses, designed to control the distance from the optical axis, maintain a constant focal length while minimizing aberrations, making them perfect for a myriad of applications, including photography, astronomy, eyewear, and more. By using aspheric lenses, optical systems can achieve higher resolution, improved light throughput, and enhanced image quality.

Manufacturing Tolerances: Understand the manufacturing tolerances of the aspheric lenses, including diameter tolerance, surface quality tolerance, and form error tolerance. Consider the impact of these tolerances on your system’s performance.

Ultraviolet rays are usually invisible to most humans. The lens of the human eye blocks most radiation in the wavelength range of 300–400 nm; shorter wavelengths are blocked by the cornea.[6] Humans also lack color receptor adaptations for ultraviolet rays. Nevertheless, the photoreceptors of the retina are sensitive to near-UV, and people lacking a lens (a condition known as aphakia) perceive near-UV as whitish-blue or whitish-violet.[4] Under some conditions, children and young adults can see ultraviolet down to wavelengths around 310 nm.[7][8] Near-UV radiation is visible to insects, some mammals, and some birds. Birds have a fourth color receptor for ultraviolet rays; this, coupled with eye structures that transmit more UV gives smaller birds "true" UV vision.[9][10]

UV is an investigative tool at the crime scene helpful in locating and identifying bodily fluids such as semen, blood, and saliva.[90] For example, ejaculated fluids or saliva can be detected by high-power UV sources, irrespective of the structure or colour of the surface the fluid is deposited upon.[91] UV–vis microspectroscopy is also used to analyze trace evidence, such as textile fibers and paint chips, as well as questioned documents.

Aspheric Lenses price

Ultraviolet helps detect organic material deposits that remain on surfaces where periodic cleaning and sanitizing may have failed. It is used in the hotel industry, manufacturing, and other industries where levels of cleanliness or contamination are inspected.[93][94][95][96]

The impact of UV on polymers is used for modification of the (roughness and hydrophobicity) of polymer surfaces. For example, a poly(methyl methacrylate) surface can be smoothed by vacuum ultraviolet.[105]

Wood's glass is a deep violet-blue barium-sodium silicate glass with about 9% nickel(II) oxide developed during World War I to block visible light for covert communications. It allows both infrared daylight and ultraviolet night-time communications by being transparent between 320 nm and 400 nm and also the longer infrared and just-barely-visible red wavelengths. Its maximum UV transmission is at 365 nm, one of the wavelengths of mercury lamps.[citation needed]

Ultraviolet lasers have applications in industry (laser engraving), medicine (dermatology, and keratectomy), chemistry (MALDI), free-air secure communications, computing (optical storage), and manufacture of integrated circuits.[citation needed]

Black lights are used in applications in which extraneous visible light must be minimized; mainly to observe fluorescence, the colored glow that many substances give off when exposed to UV light. UVA / UVB emitting bulbs are also sold for other special purposes, such as tanning lamps and reptile-husbandry.[citation needed]

The vacuum ultraviolet (V‑UV) band (100–200 nm) can be generated by non-linear 4 wave mixing in gases by sum or difference frequency mixing of 2 or more longer wavelength lasers. The generation is generally done in gasses (e.g. krypton, hydrogen which are two-photon resonant near 193 nm)[44] or metal vapors (e.g. magnesium). By making one of the lasers tunable, the V‑UV can be tuned. If one of the lasers is resonant with a transition in the gas or vapor then the V‑UV production is intensified. However, resonances also generate wavelength dispersion, and thus the phase matching can limit the tunable range of the 4 wave mixing. Difference frequency mixing (i.e., f1 + f2 − f3) has an advantage over sum frequency mixing because the phase matching can provide greater tuning.[44]

Amusement parks often use UV lighting to fluoresce ride artwork and backdrops. This often has the side effect of causing rider's white clothing to glow light-purple.[citation needed]

The shorter bands of UVC, as well as even more-energetic UV radiation produced by the Sun, are absorbed by oxygen and generate the ozone in the ozone layer when single oxygen atoms produced by UV photolysis of dioxygen react with more dioxygen. The ozone layer is especially important in blocking most UVB and the remaining part of UVC not already blocked by ordinary oxygen in air.[citation needed]

UV fluorescent dyes are used in many applications (for example, biochemistry and forensics). Some brands of pepper spray will leave an invisible chemical (UV dye) that is not easily washed off on a pepper-sprayed attacker, which would help police identify the attacker later.

The most deadly form of skin cancer, malignant melanoma, is mostly caused by DNA damage independent from UVA radiation. This can be seen from the absence of a direct UV signature mutation in 92% of all melanoma.[63] Occasional overexposure and sunburn are probably greater risk factors for melanoma than long-term moderate exposure.[64] UVC is the highest-energy, most-dangerous type of ultraviolet radiation, and causes adverse effects that can variously be mutagenic or carcinogenic.[65]

For humans, suntan and sunburn are familiar effects of exposure of the skin to UV light, along with an increased risk of skin cancer. The amount of UV light produced by the Sun means that the Earth would not be able to sustain life on dry land if most of that light were not filtered out by the atmosphere.[1] More energetic, shorter-wavelength "extreme" UV below 121 nm ionizes air so strongly that it is absorbed before it reaches the ground.[2] However, ultraviolet light (specifically, UVB) is also responsible for the formation of vitamin D in most land vertebrates, including humans.[3] The UV spectrum, thus, has effects both beneficial and detrimental to life.

Photography by reflected ultraviolet radiation is useful for medical, scientific, and forensic investigations, in applications as widespread as detecting bruising of skin, alterations of documents, or restoration work on paintings. Photography of the fluorescence produced by ultraviolet illumination uses visible wavelengths of light.[citation needed]

All bands of UV radiation damage collagen fibers and accelerate aging of the skin. Both UVA and UVB destroy vitamin A in skin, which may cause further damage.[61]

What is asphericalglasses

The excimer lamp, a UV source developed in the early 2000s, is seeing increasing use in scientific fields. It has the advantages of high-intensity, high efficiency, and operation at a variety of wavelength bands into the vacuum ultraviolet.[citation needed]

The impact of ultraviolet radiation on human health has implications for the risks and benefits of sun exposure and is also implicated in issues such as fluorescent lamps and health. Getting too much sun exposure can be harmful, but in moderation, sun exposure is beneficial.[47]

CORE PLUS Membership 2 Months - Paid In Full. $169.99Price. Quantity. Add to Cart. 2 Month of our Core Plus Membership paid in full.

UV radiation is useful in preparing low-surface-energy polymers for adhesives. Polymers exposed to UV will oxidize, thus raising the surface energy of the polymer. Once the surface energy of the polymer has been raised, the bond between the adhesive and the polymer is stronger.

Aspheric lenses advantages disadvantages

These lenses are available in various shapes, including plano-convex, plano-concave, biconvex, biconcave, and meniscus, each tailored for specific optical tasks.  For instance, plano-convex aspheric lenses are often employed in applications requiring precise light focusing or collimation.  On the other hand, meniscus aspheric lenses are adept at controlling aberrations in more complex optical systems.

Wide Range of Applications: Aspheric lenses find applications in various fields, including photography, astronomy, microscopy, medical devices, and more. Their ability to correct aberrations, improve image quality, and provide design flexibility makes them suitable for a wide range of optical systems.

Shortwave UV lamps are made using a fluorescent lamp tube with no phosphor coating, composed of fused quartz or vycor, since ordinary glass absorbs UVC. These lamps emit ultraviolet light with two peaks in the UVC band at 253.7 nm and 185 nm due to the mercury within the lamp, as well as some visible light. From 85% to 90% of the UV produced by these lamps is at 253.7 nm, whereas only 5–10% is at 185 nm.[36] The fused quartz tube passes the 253.7 nm radiation but blocks the 185 nm wavelength. Such tubes have two or three times the UVC power of a regular fluorescent lamp tube. These low-pressure lamps have a typical efficiency of approximately 30–40%, meaning that for every 100 watts of electricity consumed by the lamp, they will produce approximately 30–40 watts of total UV output. They also emit bluish-white visible light, due to mercury's other spectral lines. These "germicidal" lamps are used extensively for disinfection of surfaces in laboratories and food-processing industries, and for disinfecting water supplies.[citation needed]

Photographic film responds to ultraviolet radiation but the glass lenses of cameras usually block radiation shorter than 350 nm. Slightly yellow UV-blocking filters are often used for outdoor photography to prevent unwanted bluing and overexposure by UV rays. For photography in the near UV, special filters may be used. Photography with wavelengths shorter than 350 nm requires special quartz lenses which do not absorb the radiation. Digital cameras sensors may have internal filters that block UV to improve color rendition accuracy. Sometimes these internal filters can be removed, or they may be absent, and an external visible-light filter prepares the camera for near-UV photography. A few cameras are designed for use in the UV.[citation needed]

Incandescent black lights are also produced, using a filter coating on the envelope of an incandescent bulb that absorbs visible light (see section below). These are cheaper but very inefficient, emitting only a small fraction of a percent of their power as UV. Mercury-vapor black lights in ratings up to 1 kW with UV-emitting phosphor and an envelope of Wood's glass are used for theatrical and concert displays.[citation needed]

Lastly, each of these aspheric lenses has to undergo rigorous quality control as well as testing to ensure it meets required optical standards. Such processes involve examining aspects like precision pertaining to surfaces used, transparency and types of aberrations.

By carefully considering these factors, you can select the most suitable aspheric lenses for your optical system and ensure optimal performance.

Provider of lasers and laser-based technology for use in the scientific, commercial, and industrial markets.

UVC LEDs are developing rapidly, but may require testing to verify effective disinfection. Citations for large-area disinfection are for non-LED UV sources[39] known as germicidal lamps.[40] Also, they are used as line sources to replace deuterium lamps in liquid chromatography instruments.[41]

"Ultraviolet" means "beyond violet" (from Latin ultra, "beyond"), violet being the color of the highest frequencies of visible light. Ultraviolet has a higher frequency (thus a shorter wavelength) than violet light.

Sorry, Sold Out. Email Me When Back In Stock. Four Coat of Arms on Mahogany Wood Coasters; Perfect Gift for the Home; 3.6" ...

Aspheric lenses play a vital role in modern optics, offering improved optical performance, reduced aberrations, and enhanced imaging capabilities. Their unique surface profile allows for the correction of spherical aberrations and the production of compact and lightweight optical systems. With advancements in manufacturing techniques, aspheric lenses are becoming more accessible and cost-effective. Whether in photography, microscopy, medical devices, or defense optics, aspheric lenses continue to push the boundaries of optical technology, enabling clearer, sharper, and more accurate imaging.

Complex Manufacturing Process: Aspheric lenses require more specialized manufacturing techniques compared to spherical lenses. The manufacturing process involves precise control of the lens surface profile, which can be challenging and time-consuming. This complexity often results in higher production costs for aspheric lenses.

UV detectors are sensitive to most fires, including hydrocarbons, metals, sulfur, hydrogen, hydrazine, and ammonia. Arc welding, electrical arcs, lightning, X-rays used in nondestructive metal testing equipment (though this is highly unlikely), and radioactive materials can produce levels that will activate a UV detection system. The presence of UV-absorbing gases and vapors will attenuate the UV radiation from a fire, adversely affecting the ability of the detector to detect flames. Likewise, the presence of an oil mist in the air or an oil film on the detector window will have the same effect.

Apr 22, 2021 — When display products are exposed to non-moving images or letters for a long time,. it can cause ghost images on the screen. After watching TV ...

Ultraviolet radiation is helpful in the treatment of skin conditions such as psoriasis and vitiligo. Exposure to UVA, while the skin is hyper-photosensitive, by taking psoralens is an effective treatment for psoriasis. Due to the potential of psoralens to cause damage to the liver, PUVA therapy may be used only a limited number of times over a patient's lifetime.

For clothing, the ultraviolet protection factor (UPF) represents the ratio of sunburn-causing UV without and with the protection of the fabric, similar to sun protection factor (SPF) ratings for sunscreen.[citation needed] Standard summer fabrics have UPFs around 6, which means that about 20% of UV will pass through.[citation needed]

Vacuum UV, or VUV, wavelengths (shorter than 200 nm) are strongly absorbed by molecular oxygen in the air, though the longer wavelengths around 150–200 nm can propagate through nitrogen. Scientific instruments can, therefore, use this spectral range by operating in an oxygen-free atmosphere (pure nitrogen, or argon for shorter wavelengths), without the need for costly vacuum chambers. Significant examples include 193-nm photolithography equipment (for semiconductor manufacturing) and circular dichroism spectrometers.[citation needed]

Aspheric lenses offer several advantages over traditional spherical lenses, making them a popular choice in various optical systems. However, it is important to consider the disadvantages as well. Let’s explore the advantages and disadvantages of aspheric lenses in more detail.

Once the material has been decided upon, it is shaped into a rough lens blank. This can be done using molding or machining methods depending on the material and precision required.

UVC LEDs are relatively new to the commercial market and are gaining in popularity.[failed verification][111] Due to their monochromatic nature (±5 nm)[failed verification] these LEDs can target a specific wavelength needed for disinfection. This is especially important knowing that pathogens vary in their sensitivity to specific UV wavelengths. LEDs are mercury free, instant on/off, and have unlimited cycling throughout the day.[112]

Molded Polymer Aspheres are similar to PGM except they utilize polymer materials instead of glass. This results in lightweight and cost-effective lens options. • Advantages: MPA is cheaper than glass, yet allows sufficient light transmission so long as it’s durably made. • Use Cases: Mass-market eyewear or other optics for consumers.

EPROMs (Erasable Programmable Read-Only Memory) are erased by exposure to UV radiation. These modules have a transparent (quartz) window on the top of the chip that allows the UV radiation in.

In general, ultraviolet detectors use either a solid-state device, such as one based on silicon carbide or aluminium nitride, or a gas-filled tube as the sensing element. UV detectors that are sensitive to UV in any part of the spectrum respond to irradiation by sunlight and artificial light. A burning hydrogen flame, for instance, radiates strongly in the 185- to 260-nanometer range and only very weakly in the IR region, whereas a coal fire emits very weakly in the UV band yet very strongly at IR wavelengths; thus, a fire detector that operates using both UV and IR detectors is more reliable than one with a UV detector alone. Virtually all fires emit some radiation in the UVC band, whereas the Sun's radiation at this band is absorbed by the Earth's atmosphere. The result is that the UV detector is "solar blind", meaning it will not cause an alarm in response to radiation from the Sun, so it can easily be used both indoors and outdoors.

Choosing the right material for making an aspheric lens is the first step involved in this process. Materials may range from glass for precise optical instruments to polymers used in consumer eye-wear.

Precision polishing is employed to attain the exact mirror-like finish required for aspheric lenses. This technique smoothens carefully the surface removing any flaws hence reaching the desired optical clarity. • Advantages: Provides better surface finishing and works well with different lens sizes and materials. • Use Cases: Frequently applied to expensive optical devices such as aerospace and medical imaging equipment.

Some sources use the distinction of "hard UV" and "soft UV". For instance, in the case of astrophysics, the boundary may be at the Lyman limit (wavelength 91.2 nm, the energy needed to ionise a hydrogen atom from its ground state), with "hard UV" being more energetic;[21] the same terms may also be used in other fields, such as cosmetology, optoelectronic, etc. The numerical values of the boundary between hard/soft, even within similar scientific fields, do not necessarily coincide; for example, one applied-physics publication used a boundary of 190 nm between hard and soft UV regions.[22]

Elevated levels of ultraviolet radiation, in particular UV-B, have also been speculated as a cause of mass extinctions in the fossil record.[123]

Improved Optical Performance: Aspheric lenses provide improved optical performance compared to spherical lenses. By correcting aberrations such as coma, astigmatism, and distortion, aspheric lenses deliver higher image quality and resolution. This improvement in optical performance is particularly noticeable in wide-angle and high-power lenses.

Correction of Spherical Aberration: One of the key advantages of aspheric lenses is their ability to correct spherical aberration. Spherical aberration occurs when light rays passing through a spherical lens do not converge to a single point, resulting in blurred and distorted images. Aspheric lenses, with their non-spherical surface profile, can mitigate spherical aberration and produce sharper and clearer images across the entire field of view.

In particular, difference frequency mixing two photons of an ArF (193 nm) excimer laser with a tunable visible or near IR laser in hydrogen or krypton provides resonantly enhanced tunable V‑UV covering from 100 nm to 200 nm.[44] Practically, the lack of suitable gas / vapor cell window materials above the lithium fluoride cut-off wavelength limit the tuning range to longer than about 110 nm. Tunable V‑UV wavelengths down to 75 nm was achieved using window-free configurations.[45]

Colorless fluorescent dyes that emit blue light under UV are added as optical brighteners to paper and fabrics. The blue light emitted by these agents counteracts yellow tints that may be present and causes the colors and whites to appear whiter or more brightly colored.

After the process of machining, the lenses are then polished so that any imperfections within them can be eliminated and clearness of optical sort obtained as a result. This is highly relevant for aspheric ones because even minor surface defects can greatly affect their performance.

Versatility in Design: Aspheric lenses offer greater design flexibility compared to spherical lenses. Designers can optimize the surface profile of aspheric lenses to achieve specific optical properties and correct for various aberrations. This versatility allows for the customization of lenses to meet specific application requirements.

Several solid-state and vacuum devices have been explored for use in different parts of the UV spectrum. Many approaches seek to adapt visible light-sensing devices, but these can suffer from unwanted response to visible light and various instabilities. Ultraviolet can be detected by suitable photodiodes and photocathodes, which can be tailored to be sensitive to different parts of the UV spectrum. Sensitive UV photomultipliers are available. Spectrometers and radiometers are made for measurement of UV radiation. Silicon detectors are used across the spectrum.[20]

Many insects use the ultraviolet wavelength emissions from celestial objects as references for flight navigation. A local ultraviolet emitter will normally disrupt the navigation process and will eventually attract the flying insect.

The photochemical properties of melanin make it an excellent photoprotectant. However, sunscreen chemicals cannot dissipate the energy of the excited state as efficiently as melanin and therefore, if sunscreen ingredients penetrate into the lower layers of the skin, the amount of reactive oxygen species may be increased.[79][69][70][80] The amount of sunscreen that penetrates through the stratum corneum may or may not be large enough to cause damage.

Many pigments and dyes absorb UV and change colour, so paintings and textiles may need extra protection both from sunlight and fluorescent lamps, two common sources of UV radiation. Window glass absorbs some harmful UV, but valuable artifacts need extra shielding. Many museums place black curtains over watercolour paintings and ancient textiles, for example. Since watercolours can have very low pigment levels, they need extra protection from UV. Various forms of picture framing glass, including acrylics (plexiglass), laminates, and coatings, offer different degrees of UV (and visible light) protection.[citation needed]

UV sources for UV curing applications include UV lamps, UV LEDs, and excimer flash lamps. Fast processes such as flexo or offset printing require high-intensity light focused via reflectors onto a moving substrate and medium so high-pressure Hg (mercury) or Fe (iron, doped)-based bulbs are used, energized with electric arcs or microwaves. Lower-power fluorescent lamps and LEDs can be used for static applications. Small high-pressure lamps can have light focused and transmitted to the work area via liquid-filled or fiber-optic light guides.

Photolithography is used in the manufacture of semiconductors, integrated circuit components,[104] and printed circuit boards. Photolithography processes used to fabricate electronic integrated circuits presently use 193 nm UV and are experimentally using 13.5 nm UV for extreme ultraviolet lithography.

It is a known problem that high levels of output of the UVa part of the spectrum can both cause cellular and DNA damage to sensitive parts of their bodies – especially the eyes where blindness is the result of an improper UVa/b source use and placement photokeratitis.[citation needed] For many keepers there must also be a provision for an adequate heat source this has resulted in the marketing of heat and light "combination" products.[citation needed] Keepers should be careful of these "combination" light/ heat and UVa/b generators, they typically emit high levels of UVa with lower levels of UVb that are set and difficult to control so that animals can have their needs met.[citation needed] A better strategy is to use individual sources of these elements and so they can be placed and controlled by the keepers for the max benefit of the animals.[121]

Extreme UV (EUV or sometimes XUV) is characterized by a transition in the physics of interaction with matter. Wavelengths longer than about 30 nm interact mainly with the outer valence electrons of atoms, while wavelengths shorter than that interact mainly with inner-shell electrons and nuclei. The long end of the EUV spectrum is set by a prominent He+ spectral line at 30.4 nm. EUV is strongly absorbed by most known materials, but synthesizing multilayer optics that reflect up to about 50% of EUV radiation at normal incidence is possible. This technology was pioneered by the NIXT and MSSTA sounding rockets in the 1990s, and it has been used to make telescopes for solar imaging. See also the Extreme Ultraviolet Explorer satellite.[citation needed]

Asphericallens photography

Ultraviolet (UV) light is electromagnetic radiation of wavelengths of 10–400 nanometers, shorter than that of visible light, but longer than X-rays. UV radiation is present in sunlight, and constitutes about 10% of the total electromagnetic radiation output from the Sun. It is also produced by electric arcs, Cherenkov radiation, and specialized lights, such as mercury-vapor lamps, tanning lamps, and black lights.

Reduced Lens Aberrations: Same as achromatic lenses, aspheric lenses help minimize various aberrations, including chromatic aberration, field curvature, and astigmatism. Chromatic aberration, which causes color fringing, is reduced in aspheric lenses, resulting in more accurate color reproduction. Field curvature, the curvature of the focal plane, is also better controlled in aspheric lenses, resulting in sharper focus across the entire image. Astigmatism, which causes distorted and elongated images, is corrected or minimized in aspheric lenses, leading to clearer and more accurate images.

Medical organizations recommend that patients protect themselves from UV radiation by using sunscreen. Five sunscreen ingredients have been shown to protect mice against skin tumors. However, some sunscreen chemicals produce potentially harmful substances if they are illuminated while in contact with living cells.[69][70] The amount of sunscreen that penetrates into the lower layers of the skin may be large enough to cause damage.[71]

The eye is most sensitive to damage by UV in the lower UVC band at 265–275 nm. Radiation of this wavelength is almost absent from sunlight at the surface of the Earth but is emitted by artificial sources such as the electrical arcs employed in arc welding. Unprotected exposure to these sources can cause "welder's flash" or "arc eye" (photokeratitis) and can lead to cataracts, pterygium and pinguecula formation. To a lesser extent, UVB in sunlight from 310 to 280 nm also causes photokeratitis ("snow blindness"), and the cornea, the lens, and the retina can be damaged.[83]

Reptiles need UVB for biosynthesis of vitamin D, and other metabolic processes.[120] Specifically cholecalciferol (vitamin D3), which is needed for basic cellular / neural functioning as well as the utilization of calcium for bone and egg production.[citation needed] The UVA wavelength is also visible to many reptiles and might play a significant role in their ability survive in the wild as well as in visual communication between individuals.[citation needed] Therefore, in a typical reptile enclosure, a fluorescent UV a/b source (at the proper strength / spectrum for the species), must be available for many[which?] captive species to survive. Simple supplementation with cholecalciferol (Vitamin D3) will not be enough as there is a complete biosynthetic pathway[which?] that is "leapfrogged" (risks of possible overdoses), the intermediate molecules and metabolites[which?] also play important functions in the animals health.[citation needed] Natural sunlight in the right levels is always going to be superior to artificial sources, but this might not be possible for keepers in different parts of the world.[citation needed]

Ultraviolet traps called bug zappers are used to eliminate various small flying insects. They are attracted to the UV and are killed using an electric shock, or trapped once they come into contact with the device. Different designs of ultraviolet radiation traps are also used by entomologists for collecting nocturnal insects during faunistic survey studies.

Suspended nanoparticles in stained-glass prevent UV rays from causing chemical reactions that change image colors.[citation needed] A set of stained-glass color-reference chips is planned to be used to calibrate the color cameras for the 2019 ESA Mars rover mission, since they will remain unfaded by the high level of UV present at the surface of Mars.[citation needed]

Despite these disadvantages, the benefits of aspheric lenses often outweigh the drawbacks in many optical systems. The improved optical performance, correction of aberrations, compact design, and versatility make aspheric lenses a valuable tool in various industries.

As a defense against UV radiation, the amount of the brown pigment melanin in the skin increases when exposed to moderate (depending on skin type) levels of radiation; this is commonly known as a sun tan. The purpose of melanin is to absorb UV radiation and dissipate the energy as harmless heat, protecting the skin against both direct and indirect DNA damage from the UV. UVA gives a quick tan that lasts for days by oxidizing melanin that was already present and triggers the release of the melanin from melanocytes. UVB yields a tan that takes roughly 2 days to develop because it stimulates the body to produce more melanin.[citation needed]

UV radiation was discovered in February 1801 when the German physicist Johann Wilhelm Ritter observed that invisible rays just beyond the violet end of the visible spectrum darkened silver chloride-soaked paper more quickly than violet light itself. He announced the discovery in a very brief letter to the Annalen der Physik[11][12] and later called them "(de-)oxidizing rays" (German: de-oxidierende Strahlen) to emphasize chemical reactivity and to distinguish them from "heat rays", discovered the previous year at the other end of the visible spectrum. The simpler term "chemical rays" was adopted soon afterwards, and remained popular throughout the 19th century, although some said that this radiation was entirely different from light (notably John William Draper, who named them "tithonic rays"[13][14]). The terms "chemical rays" and "heat rays" were eventually dropped in favor of ultraviolet and infrared radiation, respectively.[15][16] In 1878, the sterilizing effect of short-wavelength light by killing bacteria was discovered. By 1903, the most effective wavelengths were known to be around 250 nm. In 1960, the effect of ultraviolet radiation on DNA was established.[17]

Ultraviolet lamps are used to sterilize workspaces and tools used in biology laboratories and medical facilities. Commercially available low-pressure mercury-vapor lamps emit about 86% of their radiation at 254 nanometers (nm), with 265 nm being the peak germicidal effectiveness curve. UV at these germicidal wavelengths damage a microorganism's DNA/RNA so that it cannot reproduce, making it harmless, (even though the organism may not be killed).[110] Since microorganisms can be shielded from ultraviolet rays in small cracks and other shaded areas, these lamps are used only as a supplement to other sterilization techniques.

Common soda–lime glass, such as window glass, is partially transparent to UVA, but is opaque to shorter wavelengths, passing about 90% of the light above 350 nm, but blocking over 90% of the light below 300 nm.[30][31][32] A study found that car windows allow 3–4% of ambient UV to pass through, especially if the UV was greater than 380 nm.[33] Other types of car windows can reduce transmission of UV that is greater than 335 nm.[33] Fused quartz, depending on quality, can be transparent even to vacuum UV wavelengths. Crystalline quartz and some crystals such as CaF2 and MgF2 transmit well down to 150 nm or 160 nm wavelengths.[34]

UVB radiation can cause direct DNA damage.[62] This cancer connection is one reason for concern about ozone depletion and the ozone hole.

Gas lasers, laser diodes, and solid-state lasers can be manufactured to emit ultraviolet rays, and lasers are available that cover the entire UV range. The nitrogen gas laser uses electronic excitation of nitrogen molecules to emit a beam that is mostly UV. The strongest ultraviolet lines are at 337.1 nm and 357.6 nm in wavelength. Another type of high-power gas lasers are excimer lasers. They are widely used lasers emitting in ultraviolet and vacuum ultraviolet wavelength ranges. Presently, UV argon-fluoride excimer lasers operating at 193 nm are routinely used in integrated circuit production by photolithography. The current[timeframe?] wavelength limit of production of coherent UV is about 126 nm, characteristic of the Ar2* excimer laser.[citation needed]

Very hot objects emit UV radiation (see black-body radiation). The Sun emits ultraviolet radiation at all wavelengths, including the extreme ultraviolet where it crosses into X-rays at 10 nm. Extremely hot stars (such as O- and B-type) emit proportionally more UV radiation than the Sun. Sunlight in space at the top of Earth's atmosphere (see solar constant) is composed of about 50% infrared light, 40% visible light, and 10% ultraviolet light, for a total intensity of about 1400 W/m2 in vacuum.[23]

The atmosphere blocks about 77% of the Sun's UV, when the Sun is highest in the sky (at zenith), with absorption increasing at shorter UV wavelengths. At ground level with the sun at zenith, sunlight is 44% visible light, 3% ultraviolet, and the remainder infrared.[24][25] Of the ultraviolet radiation that reaches the Earth's surface, more than 95% is the longer wavelengths of UVA, with the small remainder UVB. Almost no UVC reaches the Earth's surface.[26] The fraction of UVA and UVB which remains in UV radiation after passing through the atmosphere is heavily dependent on cloud cover and atmospheric conditions. On "partly cloudy" days, patches of blue sky showing between clouds are also sources of (scattered) UVA and UVB, which are produced by Rayleigh scattering in the same way as the visible blue light from those parts of the sky. UVB also plays a major role in plant development, as it affects most of the plant hormones.[27] During total overcast, the amount of absorption due to clouds is heavily dependent on the thickness of the clouds and latitude, with no clear measurements correlating specific thickness and absorption of UVA and UVB.[28]

Precision Glass Molding is a technique that can produce many aspheric lenses at once. It consists of heating the glass blank until it becomes moldable then pressing it into a mold with the desired form. • Advantages: PGM is cost-effective for large-scale manufacturing and promotes uniformity among lenses. • Use Cases: Complex lens shapes on consumer electronics like camera lenses and smartphone optics.

Sunscreen reduces the direct DNA damage that causes sunburn, by blocking UVB, and the usual SPF rating indicates how effectively this radiation is blocked. SPF is, therefore, also called UVB-PF, for "UVB protection factor".[72] This rating, however, offers no data about important protection against UVA,[73] which does not primarily cause sunburn but is still harmful, since it causes indirect DNA damage and is also considered carcinogenic. Several studies suggest that the absence of UVA filters may be the cause of the higher incidence of melanoma found in sunscreen users compared to non-users.[74][75][76][77][78] Some sunscreen lotions contain titanium dioxide, zinc oxide, and avobenzone, which help protect against UVA rays.

Vitamin D can also be obtained from food and supplementation.[50] Excess sun exposure produces harmful effects, however.[49]

Ultraviolet radiation can aggravate several skin conditions and diseases, including[81] systemic lupus erythematosus, Sjögren's syndrome, Sinear Usher syndrome, rosacea, dermatomyositis, Darier's disease, Kindler–Weary syndrome and Porokeratosis.[82]

Electronic components that require clear transparency for light to exit or enter (photovoltaic panels and sensors) can be potted using acrylic resins that are cured using UV energy. The advantages are low VOC emissions and rapid curing.

Butterflies use ultraviolet as a communication system for sex recognition and mating behavior. For example, in the Colias eurytheme butterfly, males rely on visual cues to locate and identify females. Instead of using chemical stimuli to find mates, males are attracted to the ultraviolet-reflecting color of female hind wings.[117] In Pieris napi butterflies it was shown that females in northern Finland with less UV-radiation present in the environment possessed stronger UV signals to attract their males than those occurring further south. This suggested that it was evolutionarily more difficult to increase the UV-sensitivity of the eyes of the males than to increase the UV-signals emitted by the females.[118]

Avantier produces UV bandpass filters that are specialized optical components designed to selectively transmit ultraviolet (UV) light within specific wavelength ...

Specialized UV gas-discharge lamps containing different gases produce UV radiation at particular spectral lines for scientific purposes. Argon and deuterium arc lamps are often used as stable sources, either windowless or with various windows such as magnesium fluoride.[37] These are often the emitting sources in UV spectroscopy equipment for chemical analysis.[citation needed]

Using a catalytic chemical reaction from titanium dioxide and UVC exposure, oxidation of organic matter converts pathogens, pollens, and mold spores into harmless inert byproducts. However, the reaction of titanium dioxide and UVC is not a straight path. Several hundreds of reactions occur prior to the inert byproducts stage and can hinder the resulting reaction creating formaldehyde, aldehyde, and other VOC's en route to a final stage. Thus, the use of titanium dioxide and UVC requires very specific parameters for a successful outcome. The cleansing mechanism of UV is a photochemical process. Contaminants in the indoor environment are almost entirely organic carbon-based compounds, which break down when exposed to high-intensity UV at 240 to 280 nm. Short-wave ultraviolet radiation can destroy DNA in living microorganisms.[106] UVC's effectiveness is directly related to intensity and exposure time.

Put your optical component needs in the hands of Chineselens Optics and our dedicated marketing team will quickly provide you with a customised response and solution.

Aspheric lenses go way beyond being an advancement in optics; they form a bedrock in many applications requiring high precision and efficiency. They have lighter weight allowing for thin structures that reduce aberrations hence providing clearer images. Here is how different field uses aspheric lenses:

Certain inks, coatings, and adhesives are formulated with photoinitiators and resins. When exposed to UV light, polymerization occurs, and so the adhesives harden or cure, usually within a few seconds. Applications include glass and plastic bonding, optical fiber coatings, the coating of flooring, UV coating and paper finishes in offset printing, dental fillings, and decorative fingernail "gels".

Limited Availability: Aspheric lenses may not be as widely available as spherical lenses, particularly in certain sizes and specifications. This limited availability can make it more challenging to source specific aspheric lenses for custom applications or niche markets.

A black light lamp emits long-wave UVA radiation and little visible light. Fluorescent black light lamps work similarly to other fluorescent lamps, but use a phosphor on the inner tube surface which emits UVA radiation instead of visible light. Some lamps use a deep-bluish-purple Wood's glass optical filter that blocks almost all visible light with wavelengths longer than 400 nanometers.[35] The purple glow given off by these tubes is not the ultraviolet itself, but visible purple light from mercury's 404 nm spectral line which escapes being filtered out by the coating. Other black lights use plain glass instead of the more expensive Wood's glass, so they appear light-blue to the eye when operating.[citation needed]

UV degradation is one form of polymer degradation that affects plastics exposed to sunlight. The problem appears as discoloration or fading, cracking, loss of strength or disintegration. The effects of attack increase with exposure time and sunlight intensity. The addition of UV absorbers inhibits the effect.

The differential effects of various wavelengths of light on the human cornea and skin are sometimes called the "erythemal action spectrum".[59] The action spectrum shows that UVA does not cause immediate reaction, but rather UV begins to cause photokeratitis and skin redness (with lighter skinned individuals being more sensitive) at wavelengths starting near the beginning of the UVB band at 315 nm, and rapidly increasing to 300 nm. The skin and eyes are most sensitive to damage by UV at 265–275 nm, which is in the lower UVC band. At still shorter wavelengths of UV, damage continues to happen, but the overt effects are not as great with so little penetrating the atmosphere. The WHO-standard ultraviolet index is a widely publicized measurement of total strength of UV wavelengths that cause sunburn on human skin, by weighting UV exposure for action spectrum effects at a given time and location. This standard shows that most sunburn happens due to UV at wavelengths near the boundary of the UVA and UVB bands.[citation needed]

Overexposure to UVB radiation not only can cause sunburn but also some forms of skin cancer. However, the degree of redness and eye irritation (which are largely not caused by UVA) do not predict the long-term effects of UV, although they do mirror the direct damage of DNA by ultraviolet.[60]

The electromagnetic spectrum of ultraviolet radiation (UVR), defined most broadly as 10–400 nanometers, can be subdivided into a number of ranges recommended by the ISO standard ISO 21348:[19]

Light-emitting diodes (LEDs) can be manufactured to emit radiation in the ultraviolet range. In 2019, following significant advances over the preceding five years, UVA LEDs of 365 nm and longer wavelength were available, with efficiencies of 50% at 1.0 W output. Currently, the most common types of UV LEDs are in 395 nm and 365 nm wavelengths, both of which are in the UVA spectrum. The rated wavelength is the peak wavelength that the LEDs put out, but light at both higher and lower wavelengths are present.[citation needed]

Surface Accuracies: Consider the desired surface accuracies, including form errors, waviness, and surface roughness, to ensure optimal performance. The surface quality of aspheric lenses affects their ability to correct aberrations and deliver high-quality images.

What is asphericallenses

In humans, excessive exposure to UV radiation can result in acute and chronic harmful effects on the eye's dioptric system and retina. The risk is elevated at high altitudes and people living in high latitude areas where snow covers the ground right into early summer and sun positions even at zenith are low, are particularly at risk.[57] Skin, the circadian system, and the immune system can also be affected.[58]

Radius and Metrology Techniques: Choose the appropriate radius of curvature based on your system’s requirements. Understand the metrology techniques required for accurate measurement and verification of the aspheric surfaces.

Vitamin D promotes the creation of serotonin. The production of serotonin is in direct proportion to the degree of bright sunlight the body receives.[51] Serotonin is thought to provide sensations of happiness, well-being and serenity to human beings.[52]

The discovery of the ultraviolet radiation with wavelengths below 200 nm, named "vacuum ultraviolet" because it is strongly absorbed by the oxygen in air, was made in 1893 by German physicist Victor Schumann.[18]

In pollution control applications, ultraviolet analyzers are used to detect emissions of nitrogen oxides, sulfur compounds, mercury, and ammonia, for example in the flue gas of fossil-fired power plants.[100] Ultraviolet radiation can detect thin sheens of spilled oil on water, either by the high reflectivity of oil films at UV wavelengths, fluorescence of compounds in oil, or by absorbing of UV created by Raman scattering in water.[101] UV absorbance can also be uesd to quantify contaminants in wastewater. Most commonly used 254 nm UV absorbance is genrally used as a surrogate parameters to quantify NOM.[99] Another form of light-based detection method uses a wide spectrum of excitation emission matrix (EEM) to detect and identify contaminants based on their flourense properties.[99][102] EEM could be used to discriminate different groups of NOM based on the difference in light emission and excitation of fluorophores. NOMs with certain molecular structures are reported to have fluorescent properties in a wide range of excitation/emission wavelengths.[103][99]

In an experiment by Hanson et al. that was published in 2006, the amount of harmful reactive oxygen species (ROS) was measured in untreated and in sunscreen treated skin. In the first 20 minutes, the film of sunscreen had a protective effect and the number of ROS species was smaller. After 60 minutes, however, the amount of absorbed sunscreen was so high that the amount of ROS was higher in the sunscreen-treated skin than in the untreated skin.[79] The study indicates that sunscreen must be reapplied within 2 hours in order to prevent UV light from penetrating to sunscreen-infused live skin cells.[79]

Interferometry: Interferometric methods, such as white light interferometry and phase-shifting interferometry, are used to measure the surface shape and deviations from the desired aspheric profile. Interferometers provide high-resolution measurements and are widely used in the optics industry.

UV fluorescent dyes that glow in the primary colors are used in paints, papers, and textiles either to enhance color under daylight illumination or to provide special effects when lit with UV lamps. Blacklight paints that contain dyes that glow under UV are used in a number of art and aesthetic applications.[citation needed]

Optical Requirements: Determine the specific optical properties required for your application, such as focal length, numerical aperture, and wavelength range. Consider the impact of aspheric aberrations on your system’s performance.

202059 — The primary magnifier is Donogan optivisors. I've got two heads pieces and probably four or five different lenses. You do want to get the glass lenses.

UV rays also treat certain skin conditions. Modern phototherapy has been used to successfully treat psoriasis, eczema, jaundice, vitiligo, atopic dermatitis, and localized scleroderma.[53][54] In addition, UV light, in particular UVB radiation, has been shown to induce cell cycle arrest in keratinocytes, the most common type of skin cell.[55] As such, sunlight therapy can be a candidate for treatment of conditions such as psoriasis and exfoliative cheilitis, conditions in which skin cells divide more rapidly than usual or necessary.[56]

The aspheric design allows for the correction of spherical aberration—a common issue in spherical lenses where light rays converge at different points, leading to blurred or distorted images.  By fine-tuning the surface profile of aspheric lenses, optical designers achieve a level of control over the light path that is impossible with traditional spherical lenses.

There is no doubt that a little sunlight is good for you! But 5–15 minutes of casual sun exposure of hands, face and arms two to three times a week during the summer months is sufficient to keep your vitamin D levels high.

The manufacture of aspheric lenses is a combination of art and science. These specialized techniques not only ensure high-quality optics, but also account for the special problems posed by aspheres. Here are five key methods used in making aspheric lenses.

UV has also been shown to reduce gaseous contaminants such as carbon monoxide and VOCs.[107][108][109] UV lamps radiating at 184 and 254 nm can remove low concentrations of hydrocarbons and carbon monoxide if the air is recycled between the room and the lamp chamber. This arrangement prevents the introduction of ozone into the treated air. Likewise, air may be treated by passing by a single UV source operating at 184 nm and passed over iron pentaoxide to remove the ozone produced by the UV lamp.

Laser welding requires a small beam spot capable of deep penetration, so a high-intensity laser beam with low diffusion is considered high quality. The quality ...

The green fluorescent protein (GFP) is often used in genetics as a marker. Many substances, such as proteins, have significant light absorption bands in the ultraviolet that are of interest in biochemistry and related fields. UV-capable spectrophotometers are common in such laboratories.

In the fast-moving optical technology world, custom aspheric lenses are the epitome of innovation, addressing very particular and special requirements. However, these lenses are not just ready-to-wear types; they are meticulously constructed and designed in order to meet their user’s exact desires. This article follows how custom aspheric lens designs originate from and who benefits from them.

The accurate measurement of aspheric surfaces is vital in verifying their quality and performance. Metrology techniques such as interferometry and profilometry are commonly used for aspheric surface characterization.

Multi-layer Diffractive Optical Element is a technology that combines the characteristics of aspherical and fluorite elements. Find out more.

Technology for VUV instrumentation was largely driven by solar astronomy for many decades. While optics can be used to remove unwanted visible light that contaminates the VUV, in general, detectors can be limited by their response to non-VUV radiation, and the development of solar-blind devices has been an important area of research. Wide-gap solid-state devices or vacuum devices with high-cutoff photocathodes can be attractive compared to silicon diodes.[citation needed]

As a rule, anti-reflective or other special coatings are usually applied on aspheric lenses to improve their efficiency. This stage enhances the transmission of light while reducing reflections, especially in such applications as eyeglasses and camera lenses.

Reduced Flare and Ghosting: Aspheric lenses are known for their ability to reduce flare and ghosting, which are common optical artifacts caused by internal reflections within the lens elements. By minimizing these artifacts, aspheric lenses deliver images with improved contrast and clarity, particularly in challenging lighting conditions.

What is asphericalvs aspheric

In the past, UVA was considered not harmful or less harmful than UVB, but today it is known to contribute to skin cancer via indirect DNA damage (free radicals such as reactive oxygen species).[66] UVA can generate highly reactive chemical intermediates, such as hydroxyl and oxygen radicals, which in turn can damage DNA. The DNA damage caused indirectly to skin by UVA consists mostly of single-strand breaks in DNA, while the damage caused by UVB includes direct formation of thymine dimers or cytosine dimers and double-strand DNA breakage.[67] UVA is immunosuppressive for the entire body (accounting for a large part of the immunosuppressive effects of sunlight exposure), and is mutagenic for basal cell keratinocytes in skin.[68]

By employing accurate and reliable metrology techniques, manufacturers can validate the quality of aspheric lenses and guarantee their performance in optical systems.

Disinfection using UV radiation is commonly used in wastewater treatment applications and is finding an increased usage in municipal drinking water treatment. Many bottlers of spring water use UV disinfection equipment to sterilize their water. Solar water disinfection[113] has been researched for cheaply treating contaminated water using natural sunlight. The UVA irradiation and increased water temperature kill organisms in the water.

Lasers have been used to indirectly generate non-coherent extreme UV (E‑UV) radiation at 13.5 nm for extreme ultraviolet lithography. The E‑UV is not emitted by the laser, but rather by electron transitions in an extremely hot tin or xenon plasma, which is excited by an excimer laser.[46] This technique does not require a synchrotron, yet can produce UV at the edge of the X‑ray spectrum. Synchrotron light sources can also produce all wavelengths of UV, including those at the boundary of the UV and X‑ray spectra at 10 nm.[citation needed]

In sunscreen, ingredients that absorb UVA/UVB rays, such as avobenzone, oxybenzone[29] and octyl methoxycinnamate, are organic chemical absorbers or "blockers". They are contrasted with inorganic absorbers/"blockers" of UV radiation such as carbon black, titanium dioxide, and zinc oxide.[citation needed]

Other UV sources with more continuous emission spectra include xenon arc lamps (commonly used as sunlight simulators), deuterium arc lamps, mercury-xenon arc lamps, and metal-halide arc lamps.[citation needed]