Infrared photography tutorials, tools, and tips.

20231010 — Fresnel prisms and lenses are optical components used in various applications, such as vision correction and light manipulation.

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

Glass refractive indexformula

May 17, 2024 — As of right now, Vision is still planned on being fully supported after October 2025. The statements you are referencing are from 2020 -- given ...

Refractive indexof diamond

The UX exposure box I made gives me a maximum black at about 12 minutes with Fixxons transparency material that I use for my digital negatives. Right now, the height is about 4 inches from the negative. This may change but it doesn’t really matter much if it is 4 or 6 inches. The LED strips are 3/8ths of an inch wide and I centered them on an inch strip (30 inches for 30 strips). The video shows the lights really stacked on top of each other, but so far I have gotten pretty even light with some space in-between. I also staggered where they begin and end so that the coverage is more even and not just strips of LEDS horizontally. The video does a good job of explaining this. You do not need the battery or the extra stuff he shows in the video, just the power transformer.

2022220 — The part of optics dealing with the ray aspect of light is called geometric optics. Light can travel in three ways from a source to another ...

Crownglass refractive index

Once you are done, test with the power supply. You should have three positive and three negative connections on the power supply.  The one 12 AWG cord (with the red and black cord inside) from the right should go into the positive connections on the power supply and the one cord from the left should go into the two negative terminals. Which side doesn’t matter as much as long as the wires soldered to the negative side of the LED terminal is plugged into the negative connection on the power supply; same with the positive. Then connect the power cable, black is live, white is neutral and green is ground. Plug it in and step back. The lights take about 2 seconds to turn on. Once it is all working, flip the board over and attach the power supply to the board and you are done.

Its primary function is to further magnify the image produced by the objective lens. Ocular lenses are often interchangeable, allowing users to customize their ...

Chuck Robertson is an internationally respected speaker and past EO Guest Speaker. He is a visiting professor at various seminaries, and senior review leader ...

OOK 50162 20 Gauge, 50ft Copper Hobby Wirehttp://www.amazon.com/gp/product/B000WC8ULM?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00Check update at top: Wit-Lighting 16.4ft 5050 LED Strip UV Purple 395nm-405nm 5M 300 SMD Flex Light Waterproof IP65 12V DC DC 12V 5A for 5M 300LED light strip Viewing Angle : 120° Wavelength:395-405nm Long life span 50,000+ hours (Shipping says it will take a month but I got it in two days) This is what I used, but would not recommend, they turn yellow and lose brightness in a year.http://www.amazon.com/gp/product/B00MRJ0AB6?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00500w DC12v Output Switching Power Supply Adapter Non-waterproof LED Driver transformer for LED Strip Light (for reels of 6 or more) http://www.amazon.com/gp/product/B00MPBT9N6?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00Power Cordhttp://www.amazon.com/Superior-Electric-EC123-Feet-Electrical/dp/B002S9J5I4/ref=sr_1_2?ie=UTF8&qid=1453911246&sr=8-2&keywords=12awg+power+tool+replacement+cordCmple 12 AWG CL2 Rated 2-Conductor Loud Speaker Cable for In Wall Installation (White, 100')12AWG Copper Speaker Wirehttp://www.bhphotovideo.com/c/product/1008537-REG/cmple_681_n_12_awg_cl2_rated.html

Temperedglass refractive index

Refractive indexof water

The video is an excellent source for some of what you need and how to wire it. The process I did required soldering. I learned how to solder a long time ago and it’s really not hard. You may be able to do it without soldering but I do not trust the long-term ability of the clips to keep the connection. I created a really large UV light box at about 30x36 inches but it’s easier if you do something like 20x24. I made mine that large to fit over the vacuum frame I have.

I have a Nuarc 40-1K and an fluorescent exposure box I made and decided that I needed something quieter, cooler and less power hungry so I made a UV LED exposure box. I put this information together from these two links:

Connect led strips togetherhttp://www.amazon.com/Connector-Single-Color-Strip-Adaptor/dp/B0085ZX8EM/ref=pd_sim_60_1?ie=UTF8&refRID=1A8TXKYN14J7DC1AP0VG

It has a very important role in imaging, as it forms the first magnified image of the sample. The numerical aperture (NA) of the objective indicates its ...

Refractive indexof oil

Refractive indexof air

Most flint, the mineral, is found in the form of fine-grained, dark-gray lumps mixed with calk and limestone. Early man used it to make spear heads and to start fires by striking it against hard metals. The name "flint glass" was given to the glassware that was perfected in the late 1670s. It contained a powdered flint that was added to the glass compound during the making process. The flint made the glass both heavy and clearer. At a later date in American history, lead was added to the glass. Lead was found to give the glass more clarity, resonance and weight. Lead was then replaced by lime during the civil war when lead was in shorter supply.

Power supply – can power 5 reels of lights at a time (Shipping says it will take a month but I got it in two days)http://www.amazon.com/Lemonbest-Power-Transformer-Lighting-billboards/dp/B00NHDYMG0/ref=sr_1_72?s=hi&ie=UTF8&qid=1432303393&sr=1-72&keywords=led+power+supply

Refractive indexof Perspex

The index of refraction is the ratio of the speed of light in air to its speed through another media. Flint glass has a relatively high refractive index of roughly 1.66, although some flint glasses are known to have refractive indexes as low as 1.45 and as high as 2.00.

I made this box about a year ago and after 1 years use, I am not sure I would still recommend doing this. I went to add some more lights to the unit this week and noticed that the lights, which have a plastic waterproof coating over them had yellowed and that the new lights which were the same as the original were much brighter. I read the reviews of the LEDS on Amazon and a lot of people complained about the same thing. They only thing I can think of is to use LEDS without the waterproof cover and that are of better quality.

UPDATE: I would also strongly suggest getting a plastic ABS box and drill some holes in it for ventilation.https://www.amazon.com/gp/product/B005T990I0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Comments Section ... Ghosting can be due to your Rx being off. It can also be due to cornea changes due to contact lens overwear, uncontrolled ...

When you cut the LED strips, make sure it is between the two copper points (about every three LEDs). Make sure all the strips go in the same direction. How can you tell? Well when you line them up, you will see at the ends of the LED strips, two copper dots, one negative and one positive. The ends should match, so for instance all the negative copper terminals should be on the top and the entire positive terminal on the bottom. This way it makes it easy to line up and solder. You are going to take the 12 AWG wire (basically speaker wire) and have it go through holes you have to make in the center of the short sides. The speaker wire is a paired wire, one wire to go to the top and one to go towards the bottom. It doesn’t matter which is which. Start on one side and strip the red and black off so that it reaches just past the leds. Give it about an inch from the top of the LEDS. Staple this down and start soldering the small copper wire to each one. For the one side you want the negatives and the other side the positives. You do not do all of them on both sides.

Sep 14, 2017 — Focal length is the optical distance from the front element of a lens to the point where light rays entering the lens converge to form a ...

Liquid crystal (LC) is a state of matter whose properties are between those of conventional liquids and those of solid crystals. For example, a liquid ...

There are many uses for flint glasses. Flint glass can be fashioned into rhinestones, which are used as diamond simulants. Other uses include crystal chandeliers, crystal silverware and achromatic lenses and prisms.