Our Customer Stories - PB Engineering Solutions Limited - pb engineering

 2024-10-27 10:32:14

The 15th Beihang University Vision Forum for International Young Scholars will be held from December 16 to December 19, 2023 both online and offline.

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

[engl. coherence; lat. cohaerere zusammenhängen], [GES, KOG, PER], die Beziehung zw. Einzelheiten, die als zus.gehörig aufgefasst werden. In Abgrenzung von der ...

201659 — Carlo Calenda nasce a Roma nel 1973, figlio dell'economista Fabio Calenda e della regista Cristina Comencini, ha già ricoperto la carica di ...

N Back to top Numerical Aperture (NA), The maximum angle from which it can accept light. Lenses that accept light from higher angles have greater resolving power, thus NA defines resolving power. The maximum NA of objectives is 1.4, and it is limited by the physics of light and the refractive index of glass.

When the turret is rotated, it should be grasped by the ring around its edge, and not by the objectives. Using the objectives as handles can de-center and possibly damage them.

RT News

Airport Lighting Company sales@ ...

O Back to top Objective Lens, The objective lens is the single most important component of the microscope. Together with the condenser, it determines the resolution that the microscope's capability. Learning how to use the correct objective for a particular application is a prerequisite for good microscopy. Important information describing the objective lens is engraved on the side of its barrel. This is the best performance the objective is capable of and it will only yield this performance when used properly. Ocular Lenses, The ocular lenses are the lens closest to the eye and usually have a 10x magnification. Since light microscopes use binocular lenses there is a lens for each eye. It is important to adjust the distance between the microscope oculars, so that it matches your interpupillary distance. This will yield better image quality and reduce eye strain.

rt中文

The All-New Ford Ranger MS-RT delivers head-turning style and powerful performance. Bringing together a rugged exterior and refined cabin, the All-New Ranger MS-RT means zero compromise.

rt中文网

P Back to top Plan, There are many different kinds of objective lenses. Common designations include "plan" for flat field, "achromat" for partially color-corrected, and "apochromat" for highly color corrected. These designations may become combined as in "plan achromat."

The All-New Ford Ranger MS-RT provides strength and style, wherever the road or the job leads. Reliability and quality you can trust and MS-RT's bold and sporting on-road looks are what driving success looks like.

2024930 — F-number is a basic metric indicating the light-gathering ability of a lens, and is one of the basic approaches to configuring settings when taking a photo.

Advanced Illumination High Intensity In-Line Lights are ideal for imaging applications and are available at Edmund Optics.

Premium sports body styling adds to the vehicle’s sporty character from every angle. At the front, a striking bumper with an integrated splitter and a honeycomb front grille, flanked by LED headlights and signature C-Clamp DLR. Extended wheel arches and sculpted side-skirts give a pronounced side profile, increasing its width by 82mm over other models. To the rear a distinctive cab-spoiler, bumper with motorsport-style diffuser and ducktail spoiler. Class-leading design and motorsport heritage means 21” diamond-cut alloy wheels set in exclusive, noise-reducing premium tyres, gloss black mirror caps and door handles.

Parfocal, The specimen is focused for all objectives if it is focused for one objective. In other words, once the specimen is focused under one objective it will be in approximate focus under other objectives.

The condenser has an iris diaphragm that controls the angle of the beam of light focused onto the specimen. The iris diaphram is an adjustable shutter which allows you to adjust the amount of light passing through the condenser. The angle determines the Numerical Aperture (NA) of the condenser. This diaphragm, generally called the aperture diaphragm, is one of the most important controls on the microscope. Cover slip, Most objectives are designed for use with a cover slip between the objective and the specimen. The cover slip becomes part of the optical system, and its thickness is critical for optimal perfomance of the objective. The cover slip thickness designation on most objective lenses is 0.17 mm or 170 microns.

Russia Today

B Back to top Base, The base is the foundation on which the microscope stand is built. It is important that the base is relatively large, stable, and massive. When you are setting up a microscope for the first time ensure that the surface on which it is placed is level.

Россия сегодня

The All-New Ford Ranger MS-RT guarantees a superior level of handling and controllability on the road, without compromising its 1-tonne payload and 3.5tn towing capacity.

2012323 — Well, but the field of view in turn changes your focal length requirements, and thus you will get a shallower depth of field on a larger ...

T Back to top Tube, the tube houses many of the optical components of the microscope. The optical tube length of most biomedical microscopes is 160 millimeters but tube geometry varies considerably due to relay lenses and proprietary design features. In most modern microscopes the tube is folded to make the microscope easier to use. Early microscopes had straight tubes such as this model built by Robert Hooke in the mid 17th century. Tube length, describes the optical tube length for which the objective was designed. This is 160 mm (6.3 inches) for modern biomedical microscopes. Turret, Most microscopes have several objective lenses mounted on a rotating turret to facilitate changing lenses. An audible click identifies the correct position for each lens as it swings into place. When the turret is rotated, it should be grasped by the ring around its edge, and not by the objectives. Using the objectives as handles can de-center and possibly damage them.

S Back to top Stage, The stage is the platform that supports the specimen. It is usually quite large to minimize vibration and it attaches to the microscope stand. The stage has an opening for the illuminating beam of light to pass through. A spring loaded clip holds the specimen slide in place on the stage. Other types of stage clips are designed for use with petri-dishes, multiwell plates, or other specialized chambers. Most stages have a rack and pinion mechanism that can move the specimen slide in two perpendicular (X - Y) directions. On many microscopes, stage movement is controlled using two concentric knobs located to the side or below the stage. Stand, The stand is the basic structure of the microscope to which everything is attached. The stand, also known as the arm, is the part of the microscope that you grab to transport the microscope.

Microscope Anatomy & Function Glossary Back to Quicktime VR Microscope A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z A Back to top B Back to top Base, The base is the foundation on which the microscope stand is built. It is important that the base is relatively large, stable, and massive. When you are setting up a microscope for the first time ensure that the surface on which it is placed is level. C Back to top Condenser, The condenser under the stage focuses the light on the specimen, adjusts the amount of light on the specimen, and shapes the cone of light entering the objective. One way to think about the condenser is as a light "pump" that concentrates light onto the specimen. The condenser has an iris diaphragm that controls the angle of the beam of light focused onto the specimen. The iris diaphram is an adjustable shutter which allows you to adjust the amount of light passing through the condenser. The angle determines the Numerical Aperture (NA) of the condenser. This diaphragm, generally called the aperture diaphragm, is one of the most important controls on the microscope. Cover slip, Most objectives are designed for use with a cover slip between the objective and the specimen. The cover slip becomes part of the optical system, and its thickness is critical for optimal perfomance of the objective. The cover slip thickness designation on most objective lenses is 0.17 mm or 170 microns. D Back to top E Back to top F Back to top Focus (coarse), The coarse focus knob is used to bring the specimen into approximate or near focus. Focus (fine), Use the fine focus knob to sharpen the focus quality of the image after it has been brought into focus with the coarse focus knob. G Back to top H Back to top I Back to top Illuminator, There is an illuminator built into the base of most microscopes. The purpose of the illuminator is to provide even, high intensity light at the place of the field aperture, so that light can travel through the condensor to the specimen. J Back to top K Back to top L Back to top M Back to top Magnification, The degree to which the image of the specimen is enlarged by the objective. For example, 40 specifies 40 times (40x) the actual size of the specimen. As magnification increases, resolution (NA) must also increase so that more information can be obtained. Magnification without increased resolution yields no additional information and is called "empty magnification." N Back to top Numerical Aperture (NA), The maximum angle from which it can accept light. Lenses that accept light from higher angles have greater resolving power, thus NA defines resolving power. The maximum NA of objectives is 1.4, and it is limited by the physics of light and the refractive index of glass. O Back to top Objective Lens, The objective lens is the single most important component of the microscope. Together with the condenser, it determines the resolution that the microscope's capability. Learning how to use the correct objective for a particular application is a prerequisite for good microscopy. Important information describing the objective lens is engraved on the side of its barrel. This is the best performance the objective is capable of and it will only yield this performance when used properly. Ocular Lenses, The ocular lenses are the lens closest to the eye and usually have a 10x magnification. Since light microscopes use binocular lenses there is a lens for each eye. It is important to adjust the distance between the microscope oculars, so that it matches your interpupillary distance. This will yield better image quality and reduce eye strain. P Back to top Plan, There are many different kinds of objective lenses. Common designations include "plan" for flat field, "achromat" for partially color-corrected, and "apochromat" for highly color corrected. These designations may become combined as in "plan achromat." Parfocal, The specimen is focused for all objectives if it is focused for one objective. In other words, once the specimen is focused under one objective it will be in approximate focus under other objectives. Q Back to top R Back to top S Back to top Stage, The stage is the platform that supports the specimen. It is usually quite large to minimize vibration and it attaches to the microscope stand. The stage has an opening for the illuminating beam of light to pass through. A spring loaded clip holds the specimen slide in place on the stage. Other types of stage clips are designed for use with petri-dishes, multiwell plates, or other specialized chambers. Most stages have a rack and pinion mechanism that can move the specimen slide in two perpendicular (X - Y) directions. On many microscopes, stage movement is controlled using two concentric knobs located to the side or below the stage. Stand, The stand is the basic structure of the microscope to which everything is attached. The stand, also known as the arm, is the part of the microscope that you grab to transport the microscope. T Back to top Tube, the tube houses many of the optical components of the microscope. The optical tube length of most biomedical microscopes is 160 millimeters but tube geometry varies considerably due to relay lenses and proprietary design features. In most modern microscopes the tube is folded to make the microscope easier to use. Early microscopes had straight tubes such as this model built by Robert Hooke in the mid 17th century. Tube length, describes the optical tube length for which the objective was designed. This is 160 mm (6.3 inches) for modern biomedical microscopes. Turret, Most microscopes have several objective lenses mounted on a rotating turret to facilitate changing lenses. An audible click identifies the correct position for each lens as it swings into place. When the turret is rotated, it should be grasped by the ring around its edge, and not by the objectives. Using the objectives as handles can de-center and possibly damage them. U Back to top V Back to top W Back to top X Back to top Y Back to top Z Back to top Back to Quicktime VR Microscope

Sputnik

M Back to top Magnification, The degree to which the image of the specimen is enlarged by the objective. For example, 40 specifies 40 times (40x) the actual size of the specimen. As magnification increases, resolution (NA) must also increase so that more information can be obtained. Magnification without increased resolution yields no additional information and is called "empty magnification."

Imagery displays the All-New Ford Ranger MS-RT in Conquer Grey. Imagery and information shown throughout this website may not reflect latest specifications, colours may vary, options and/or accessories may be featured at additional cost.

塔斯社

Equipped with the latest in performance, safety and comfort, the All-New Ford Ranger MS-RT cabin gives you confidence to succeed. Hand-crafted eco-leather and suede interior, bespoke sports seat bolsters, and a heated sports steering wheel go alongside Ford’s SYNC 4 connectivity via a 12” touchscreen making communication and entertainment effortless.

2024416 — METRO Blue Line. Schedules & Maps; Alerts; Show my train. Schedules. Choose how you want to view the schedule. View entire schedule. View ...

I Back to top Illuminator, There is an illuminator built into the base of most microscopes. The purpose of the illuminator is to provide even, high intensity light at the place of the field aperture, so that light can travel through the condensor to the specimen.

Just when you thought the Ford Ranger MS-RT couldn’t get any more iconic, we’ve combined the striking motorsport design with enhancements to deliver the imposing characteristics that our customers love.

F Back to top Focus (coarse), The coarse focus knob is used to bring the specimen into approximate or near focus. Focus (fine), Use the fine focus knob to sharpen the focus quality of the image after it has been brought into focus with the coarse focus knob.

C Back to top Condenser, The condenser under the stage focuses the light on the specimen, adjusts the amount of light on the specimen, and shapes the cone of light entering the objective. One way to think about the condenser is as a light "pump" that concentrates light onto the specimen.