Customneonbarsigns

Low power indication: when mouse battery power is low, the indicator LED will blink red. You need to charge the mouse battery by connecting the Type-C cable. During charging, the yellow LED in the wheel will flash. After the battery is fully charged, the indicator will return to the previous color mode. Pairing If your mouse loses connection, you need to use the pairing tool to pair the mouse and receiver again. Note: If you need to customize function, please download the software from the website. CAUTION Keep the battery dry. Avoid locating the battery terminals near metallic objects. Do not short-circuit and avoid metallic or water coming into the mouse to cause battery short. Use computer USB and specified cable to charge the mouse.

CustomOutdoorBarsigns

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

1: Left click 2: Right click 3: Middle click 4: Forward 5: Backward 6: Scroll up 7: Scroll down 8: Power off 9: Power on 10: DPI button 11: Indicator 12: Type-c connector

Custom barsigns

Left click Right click Middle click Forward Backward Scroll up Scroll down Power off Power On DPI button Indicator Type-c connector

Mouse instruction Take out the wireless USB Nano receiver from the package. Plug the receiver into your computer's USB port or use an extension adaptor. Turn on the mouse power by switching the power switch on the bottom of the mouse. Wait for computer installation to finish. DPI setting and indication DPI level: 400-800-1600-3200, total 4 levels DPI. Press the DPI button on the bottom to change DPI. The indicator color will indicate the DPI level as follows: 400 DPI: cyan color blink. 800 DPI: blue color. 1600 DPI: purple color. 3200 DPI: white color. Note DPI can be set by software, with a maximum DPI of 26000 dpi. DPI LED effects can be set by software, and the DPI LED can be turned off to save power. Polling rate 125-250-500-1000Hz can be set by software, default polling rate is 1000Hz. Wired and wireless function Wired and wireless mode switch automatically. When you plug the receiver into the computer without cable connection, it will work as wireless mode. If you connect the cable from the computer to the mouse, it will switch to wired mode automatically and work as wired mode.

Customneon sign

These are completely customizable LED Neon Acrylic signs. FOR SIGN PRICING BY SIZE.. Choose the Light bar option then Select a size

Mouse instruction Take out the wireless USB Nano receiver from the package. Plug the receiver into your computer USB port or use an extension adaptor. Turn on the mouse power by switching the power switch on the bottom of the mouse. Waiting for computer installation to finish. DPI setting and indication DPIlevel: 400-800-1600-3200, total 4 levels DPI. Press the DPI button on the bottom to change DPI. The indicator color will indicate the DPI level as below: 400DPI: cyan color blink. 800DPI: blue color. 1600DPI: purple color. 3200DPI: white color. Note DPI can be set by software, MAX DPI is 26000dpi PIled effects can be set by software and can turn off the DPI led to saving power Polling rate 125-250-500-1000Hz can be set by software, default polling rate is 1000Hz Wired and wireless function: The wired and wireless mode switch automatically, when you plug the receiver into the computer without a cable connection, it will work as wireless mode. If you connect the cable from the computer to the mouse, it will switch to wired mode automatically and work as wired mode. Low power and charging indication Low power indication: when the mouse battery power is low, the indicator led will blink Red color, then you need to charge the mouse battery by connecting type-c cable. During charging the yellow color led in the wheel will flash, after the battery charges full, the indicator will back to its previous color mode. Pairing If your mouse lose connection, you need to use the pairing tool to pair the mouse and receiver again Note: If you need customize function, pls download the software from the website CAUTIOn Keep the battery dry. Avoid locating the battery terminals near metallic object. Do not short-circuits and avoid metallic or water come into mouse to cause battery short Use computer USB and specified cable to charge the mouse There is a risk of explosion if the battery is replaced with the wrong model.Please Dispose of used batteries according to the instructions

Size: 122x66.8x42.8mm Weight: 55g Switch: Optical switch PAW3395 Max DPI: 26000 Default DPI: 400-800-1600-3200DPI IPS: 650ips Acceleration: 50g (Max) Polling rate: 125-250-500-1000Hz Interface: USB 2.0 Battery type: Li-ion Polymer Battery Battery capacity: 300mAh Rating: 5V =300 mA