UVintensitymeterfor water system

This is a pretty neat way to glow up. Light in the fiber optic cable zooms through the core by constantly bouncing off of the edge of the molded plastic, a principle called "total internal reflection" (which also kinda sounds like a very expensive meditation island retreat). When the light pipe doesn't have total reflection, you can get a nifty lighting effect from the light illuminating the plastic tubing.

UV light meterapp

If you buy less than a full reel, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!

The Gould-Bass DLM-1000 Digital Radiometer is a portable, 3-1/2 digit instrument that measures either blacklight intensity in the spectral range of 320-400 nanometers in microwatts per square centimeter or visible light intensity of 380-700 nanometers (photometric response) in Lux or foot-candles, depending upon the sensor selected.

UV light metercalibration

Hocker Inc. is a manufacturer’s representative that serves many industries, including Aerospace, Petro-Chemical, Testing Lab, Turbine, and Drilling. We repair magnetic particle equipment, automatic film processors, and blacklights. Also, we provide our customers with certification and calibration services.

UV meterfor sunscreen

The latest LSI circuit design and display technology is used to achieve the lowest possible component count. This, in turn, assures reliability, accuracy, stability, and rugged dependability. In combination with its functional and aesthetic design, the Gould-Bass DLM-1000 is the easiest to handle blacklight, and visible light measuring instrument available today. The “DigiGlo” LCD display provides constant fluorescent illumination with no battery draw.

Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the picture below. If you order a full 4 or 5 meters, you get the full reel with both connectors installed.

All you need is a way to get a ton of photons into your light pipe, and that's what this is! It's Fiber Optic Light Source in a cool white color. It's a high powered LED cluster, you need to power it with 9-12V and 100mA of current, the metal body acts as a heat sink. Then, installation is a breeze. Just loosen the clear knob on the LED emitter and slide one of our fiber optic tubes.