202453 — They offer a 2960 × 1665 resolution which totals 4,928,400 pixels, so these are still 5 Megapixel cameras. A standard 5 Megapixel camera may ...

I have several recommendations (see My Recommended Lenses below) based on my tests and real world use. I’ve also included a resource section for tests done by others.

Note for the technically minded IR shooters: I think the 665nm conversion used in most of my tests is a useful one as it sits between the 590nm which tends to be more forgiving and the 830nm which tends to be more unforgiving regarding infrared issues.

Sony E 18-200mm f3.5-6.3 OSS LE (great for its absence of hotpsots at all apertures and focal lengths but only moderate performance for sharpness, as one might expect for this range. NOTE: Sony makes two other 18-200mm APS-C lenses. I only tested this one, not the PZ or older non-LE models )

Bright field vs dark fieldmask

Simon Weir’s tests of Fujifilm (XF) mount lenses A useful resource for Fuji shooters. He has information for both hot spots and sharpness

light circle background ... Round frame with glowing and light. Neon round frame with smoke... ... Vector Vibrant Neon Circle with Glow. Modern Round Frame with...

I have a Masters of Clinical Research, and a PhD in Molecular & Medical Genetics. However I love keeping up with a wide variety of scientific topics – making my work as a Managing Editor at BitesizeBio very enjoyable.

Dark fieldillumination

Hot spots are usually bright areas in the middle of the image and tend to get worse and more defined as you stop down. Some lenses don’t exhibit hot spots at all and thus are preferable for infrared. Or hot-spots may not appear at wider apertures but show up as you stop down (example below.) With zoom lenses you may get hot spots at some focal lengths and not others.

Dark field brighteffect monitor

In addition to my testing that I’ve provided here, the links that follow are a decent starting point to further help you choose lenses. One of the links is specific to Fujifilm X-mount lenses. The other two include several brands. For the most part they are all geared towards hot-spot performance. Simon Weir’s tests (Fuji mount only) provides some comments on sharpness too.

I’m rather compulsive about testing every lens I buy, both for visible light and infrared. There have been several times I’ve gone through 2 or 3 samples to get a really good one. I’ve got the visible light testing down as I’ve been doing that for decades. In recent years, I’ve figured out some good tests for infrared. Generally the number one issue is hot spots. With my studio being located in northern Arizona, more days than not, I have a clear blue north sky to shoot hot spot tests. I am able to test resolution using the same ISO 12233 targets as for visible light, in my studio. Because resolution can change with focus distance my studio test is limited to a practical range of about 3-18 feet (1-6 meters) so I will also do field tests to check lenses at greater distances. These are the controlled tests. I will also shoot various subjects in a less controlled way just to try different situations, sun angles, etc.

Microscopy is a huge and active field. Sometimes, it’s easy to forget the basics. Read our biologists’ guide to electron microscopy techniques.

Join UsSign up for our feature-packed newsletter today to ensure you get the latest expert help and advice to level up your lab work.

Panasonic Lumix G Vario 100-300mm f4-5.6 ver 1 (hot spots at 100mm but does well above 180mm. This version 1 lens is discontinued but may be available used.)

Fujifilm XF 16-80mm f4 OIS (no hot spots wide open through f5.6 at 16-24mm. Good through f8 at 35mm. 50-80mm good at all apertures)

The study of geometric probability in stereology may seem like a large, overwhelming area of focus but, don’t panic, it’s not! In fact, it is a very specific field that is likely to come easy to those that excel in mathematics or science (yes that means you). However, the concept is not one that most…

The most common issues or problems that show up with infrared that you won’t see in the same lens with visible light photography are “hot spots”, loss of acutance (sharpness), and sometimes excessive flare.

Sony E 18-135mm f3.5-5.6 OSS (My top choice for Sony APS-C. Excellent overall with no hot spots at any aperture and tested focal lengths)

Bright fieldmicroscope

Have you ever been shown how to use a microscope properly? Or do you just dive right onto the microscope with little or no training and scant knowledge of the basics, then twiddle knobs, snap photos and expect the publication-quality images to appear? If it’s the latter you are certainly not alone! If only there…

Why is this true? Camera lenses are designed to be optimized for visible light so that they render as accurately as possible, how we see with our eyes. Infrared light is transmitted by lenses, but normally focuses on a different plane than the camera’s sensor.

The list of lenses below are ones that range from partially useable to excellent for infrared. Please read the comments to guide you.

Apr 13, 2024 — Working distance in a microscope is the space between the objective lens and the object you're observing. It's important because it affects how ...

Fixing suspension cells for imaging can be trickier than fixing adherent cells, as they can’t be cultured on a coverslip. Discover how you can stick them down with the help of centrifugation.

A fantastic lens for normal visible light photography may be terrible for infrared (aka “IR”) photography. Choosing the right lens can be tricky. If you’re planning to get an infrared conversion for your camera, make sure you have lenses that will work well for it or be ready to buy one or more additional lenses, depending what you plan to shoot with your infrared camera.

Random Pattern ProjectorOsela3D,,,,3D, ...

Read More Create Publication Quality Fluorescence Microscopy Images with the Help of Leica Microsystems’ Science Lab ResourceContinue

Joel Wolfson is an internationally published photographer who loves teaching as much as shooting. He shares his 30 years of experience as a working pro with other photographers and enthusiasts by way of his workshops, 1 on 1 training, video tutorials, articles, blog and speaking engagements. His technical articles have been translated for use in more than 30 countries yet he is best known for his artistic images of nature’s fleeting moments and unexpected views of everyday places around the globe. He is one of the pioneers of digital photography having conducted digital photography seminars for Apple and other corporations starting in the early 90s.  His roster of notable clients includes numerous publications and fortune 500 companies. He currently works with great affiliates like Arizona Highways, Topaz Labs, ON1, and Skylum to have more avenues for working with those wanting to pursue their love of photography. His goal is to make learning and improving one’s photography easy, fun and rewarding.

Bright fieldanddark fieldmicroscopy PDF

I’m including lenses I’ve formally tested as well as those I’ve found to work well for infrared but prior to implementing my more formal tesing. I’ve used all of them in real world shooting. The lenses I’ve formally tested are ones I purchased more recently for Fujifilm APS-C (XF mount) and Sony full frame (FE mount) cameras. My tests were done with 665nm conversions for both. I’ve also included a few lenses for Micro 4/3 using a 590nm converted camera, that I have found to work well in real world use.

While most of us have heard of super resolution microscopy, many of you may not have heard of MSIM, or Multifocal Structured Illumination Microscopy. This under-the-radar imaging technique is relatively quick, cheap (by comparison) and will allow you to get a lot of data, fast. So What is MSIM Anyway? MSIM, as I mentioned earlier,…

If you’re lucky, you find a lens that will work well for both visible light and infrared. For example the Sony 100-400mm f4-5.6 GM is stellar for both as long as you don’t try to use the 1.4X teleconverter for infrared. For a lot of my photography (both visible and infrared) I like to have a walkabout lens that covers a broad range of focal lengths so I don’t miss shots while changing lenses. For my Fuji system I keep the Fuji XF 18-135mm on my infrared body and the Fuji XF 16-80mm on my visible light body. The XF 18-135mm happens to be superb for infrared. In the case of the Sony full frame system, I really like the FE 24-240mm. It’s certainly less than perfect for infrared but the range is so handy I just try to avoid focal lengths and apertures that are troublesome. Though it isn’t ideal, with the overlap of the Sony/Zeiss 35mm f2.8 prime, 12-24mm, and 100-400mm I can cover most situations where the 24-240mm might fall short.

While it’s quite easy to find multiple reviews for any given lens, they rarely cover infrared performance. For this reason I have done a number of exacting tests myself on numerous lenses using infrared. In some cases I have sought out third party lenses when the manufacturer doesn’t have one in my desired focal length that works well in infrared. Sometimes I just end up buying a lens and trying it because I can’t find enough (or any) information about its infrared performance.

2023925 — The basic explanation: Focal length tells us the angle of view; Lens categories according to focal length; Technical explanation: What focal ...

Keep in mind that your results could be different, particularly with different camera models and IR conversions but this should be a good guideline. It is always best if you can try before you buy and if you can’t do that, then rent or make sure the store has a good return policy.

LifePixel hot spot testing database The testing was done by LifePixel themselves, of various Canon, Nikon, Fujifilm, and Sony lenses

I have found that potential lens issues when shooting infrared are situational. By this I mean depending on the lighting, subject matter, and the specific conversion, issues with lenses may show up to a greater or lesser degree. For example, if you’re shooting a nature scene that has lots of trees in the center area of your image, you may not see a hot spot that might be visible if that same area was clear blue sky or with different lighting angles. Hot spots, in particular, can be more or less prevalent depending on the lighting. And typically hot spots are less noticeable with black and white. Generally hot spots are the worst with cameras converted to “pure” infrared in the 830nm-850nm range. So if you get a conversion with a lower number/frequency such as a 590nm, it is possible you may not have problems or as many problems with a given lens. Additionally you may encounter different results with a “full spectrum” conversion.

Many infrared shooters like the dreamy look of softer edges and don’t seek to have the same apparent sharpness they’d expect with visible light. With the infrared image that I used for my example below I had good success getting sharpness comparable to visible light using Topaz Sharpen AI. I don’t show the sharpened results here because I want viewers to be able to see the infrared versus visible light difference. However, with such amazing tools available to us, it can now be an artistic choice.

Fujifilm XF 27mm f2.8 R WR 2nd gen (only useable at f2.8 no hot spot wide open but hot spot from f4-f16. More defined as you stop down. It is so well defined at the smallest apertures, it could be spotted out in many cases)

Disclosure about product links and affiliations: Many of the links I provide are affiliate links which means I get a small commission, with no additional cost to you, if you click it and end up buying something. It helps keep the lights on as well as supporting this blog and my other free educational resources and articles. So if you use them, thanks! It is always my goal to report my results in a straighforward manner whether or not it favors a particular product.

Bright fieldlighting

Bright field vs dark field vsphase contrast

Factory direct replacement optics for CO2 and Fiber Laser Systems. Shop Now. News. 15504 full Engraver Optics. Find the right lens for your laser.

Lensmaker Equation Calculator ... This equation is used for determining the focal length of a thin lens (thickness = 0) with radii of curvature r1 and r2.

Panasonic Lumix G Vario 14-45mm f3.5-5.6 (excellent throughout range of focal length and apertures. This lens is discontinued but you may find them used)

Finally, the flare issue is highly variable and dependent on the situation much like visible light. In my experience, some lenses may be more prone to flare using infrared than with visible light. For me it’s not a deal breaker if the lens is otherwise good for infrared. I treat it as I would with visible light: I try to avoid shooting directly into the sun or other light sources. For those times I want a sun star I just try it and see if I get excessive flare or not.

The method is based on the representation of the optical element surfaces by bicubic splines and on the subsequent optimization of their parameters using a ...

Bright field vs dark fieldreddit

2023815 — Ask your helper to measure from the bony protrusion at the back of your neck, straight down your spine to where your thumbs point towards your ...

Find innovative products for band saws, lathes and machinery including pattern generators and alignment tools at Carter Products. Browse online today!

In the end, shooting infrared comes down to aesthetics and your personal preferences. Hot spots can be annoying but soft edges and/or a hazy feel are often considered part of the charm of infrared photography, especially in black and white. My aim for this article is to arm you with enough information to make informed choices based on the way you shoot or intend to shoot while participating in the amazing world of infrared photography.

Something else I’ve noticed but isn’t widely reported is loss of acutance with the same lens compared to its visible light performance, especially as you go out from the center of the image. Because people use different terminology for resolution or acutance, for ease of explanation, let’s call is apparent sharpness. It is not always strictly how well the lens resolves that leads to loss of apparent sharpness. It can also be lack of contrast, other optical factors or a combination of these. For example, a subtle broad and gradual hot spot will cause a loss of apparent sharpness in the central area by reducing contrast there.

Although digital camera sensors are capable of “seeing” infrared and ultraviolet parts of the spectrum, camera manufacturers put filters in front of the sensor that filter most of this out. When you get your camera converted to infrared, the conversion company replaces these filters with ones that allow the sensor to see a specific part of the infrared spectrum and may also include part of the visible spectrum. When you look at the choices offered, you can actually choose how much of the spectrum your converted camera will see. This offers a variety of looks from which you can choose. Because of the intricate and delicate nature of converting digital camera sensors for infrared, it is very important to choose a reputable and experienced conversion company.

Interested in the detailed structure of your tissue? High-resolution imaging techniques, such as brain electron microscopy, provide an intricate view of your tissue. While it may be a rather complicated procedure with nasty chemicals, the advantages of epon embedding can make it the best choice for morphological studies. The hard blocks are excellent for structural…

Kolari Vision hotspot database This is a compilation database they put together of numerous major equipment brands and various third party lenses.