103e701

Spire Metering Technology offers one of the broadest, most affordable lines of flow measurement and energy metering products in the industry today. Through continuous innovation, we transform complex cutting-edge technologies into affordable, reliable solutions for accurate flow and energy measurement.

Recommended Materials (Not Included): - Clear Shoe Goo (For LED Strips)  - Butyl Tape (3M Window Weld) - General Soldering Equipment (Solder, Wires, Etc)

2. Cut the Styrene Panel down to size and bend to shape using a heat gun. This process does not need to be perfect, only to ensure that there is enough area to put the LED strips. They need to sit sufficiently far enough behind the diffusion panel.

103e705

3. Lay down the LED strips. Make sure they are placed in such a way that they match the design of the diffusion layout. If you are cutting them to a shorter size, make sure they are cut in the designated cutting areas. If you are animating each section of the diffusion panel, keep them separated.

103e715

The 103E is a DIN rail four wire three phase smart energy meter. It is a new addition to Spire Metering's ePrime Series smart meter product family. It utilizes state-of-the-art technology within the electronic kWh metering industry. 103E offers all the measurement capabilities required to accurately monitor electricity consumption. All three phases can be monitored at the same time.

4. Place your diffusion panel over it. Feel free to test it at this point. If you can see the individual LED's still, then the Styrene Panel needs to be placed further back. If it looks fine, then take some butyl tape and make a border along the walls of the tail light housing. This is to seal any light from escaping out of the edges of the diffusion panel. Use shoe goo to hold the Diffusion Panel and Styrene Panel in place.

Included with DIY Kits: - Illumaesthetic LED Diffusion Panel - High Density LED Strip (Color of Choice) - Styrene Backing Panel - Dimming Modules (If Applicable)

103e.227

1. With the included Styrene Panel, mock up the approximate size and shape of the panel since it needs to be cut down and bent to fit and sit behind the diffusion panel. It should look like a smaller version of the diffusion panel when completed.

The ePrime Series smart electricity meters offer a reliable energy measurement solution for both single phase and three phase circuits. These meters are designed for residential and commercial energy consumers tied to distribution networks. The 101E/103E meters have a variety of output options, such as M-Bus, MODBUS, Pulse, RF, GSM and PLC, thus making them ready for AMR/AMI system integration. Furthermore, the meters are manufactured in accordance with relevant DIN/IEC and MID standards, and are an ideal economic solution for your electricity consumption monitoring and billing purposes.

The 103E enables you to measure active and reactive energy with high accuracy for single phase and three phase applications. It also achieves excellent long-term stability, as the unit is designed for DIN, IEN, and EN standards. The device can communicate using a variety of output options, including M-Bus, MODBUS, Pulse, RF, etc. The clear, large LCD display is easy to read, and the device can measure usage starting at very low currents, making these meters well suited for photovoltaic energy systems in addition to general use.