Automaticoil skimmer

We are happy to come to your site and demonstrate our range of products. Please complete the form and we'll be in contact shortly to arrange a date and time.

Silt or sediment is a contaminant. When pumping water out of excavations, you have a legal obligation to filter out sediment before discharging into surface water drains or natural waterways. When working by the roadside, you also have a responsibility to keep pavements and roads clean and safe. Muddy or oily water can create a slip or skid risk.

Floating oil skimmerworking principle

Sediment or silt filters need to be monitored. As the filter bag fills, flow rate will gradually decrease and the filter will look visibly full. Before the bag gets too full, pumping should be paused and the filter emptied. Refit the filter and commence pumping again. If the filter is left unmonitored there is a risk that the pressure will build and the hose will become detached. The reusable cable ties – provided for securing the filter to the discharge hose – are designed to break before the filter bursts. In between jobs, use a hose to wash the inside of the filter to prolong its lifespan.

Bestfloating oil skimmer

Filters are designed to be used with a 2” pump. If you need greater throughput, consider using a Green Rhino Manifold to harness four, six or eight filters at once. Manifolds are available with 4” or 6” connectors.

Failure to abide by the law can lead to fines, prosecution, loss of contracts and clean-up costs. If you work in utility maintenance, fines and unbudgeted costs can wipe out your wafer-thin margins.

Use the reusable cable ties provided with the dewatering filter. Tighten two around the collar of the filter to around 2/3rd the width of the hose. If pressure builds inside the filter, these are designed to break and release the pressure before damaging the filter. For this reason, do not use other methods such as chains or rope to secure the filter. If you have problems with filters becoming regularly detached then the flow rate is too high and/or you are not emptying the filter when full. If the flow rate is too high, consider using a Green Rhino Manifold to increase throughput.

SkimOILFloating Oil Skimmer

Sediment or silt filters need to be monitored. As the filter bag fills, flow rate will gradually decrease and the filter will look visibly full. Before the bag gets too full, pumping should be paused and the filter emptied. Refit the filter and commence pumping again. If the filter is left unmonitored there is a risk that the pressure will build and the hose will become detached. The reusable cable ties – provided for securing the filter to the discharge hose – are designed to break before the filter bursts. In between jobs, use a hose to wash the inside of the filter to prolong its lifespan.

Floatingweiroil skimmer

Floating oil skimmerfor sale

Your workers are under pressure to get the work done. Help encourage compliant behaviour by providing environmental solutions that are hard-wearing, effective and quick to deploy.

Beltoil skimmer

Green Rhino dewatering filters offer an easy to deploy solution which can be scaled up to achieve higher flow rates. Up to eight sediment dewatering filters can be harnessed using the Green Rhino Manifold System. This reusable system delivers the flow rate and filtration capacity of a settlement tank without the expensive hire costs.

These rugged and reusable sediment filter bags provide an easy-to-use and cost-effective alternative to settlement tanks and vacuum tankers. Green Rhino dewatering filters clean water to regulator-approved standards. You may also know these filters by other names such as sediment dewatering filter bags, silt bags, filter socks or silt socks.

With a Green Rhino Sediment Filter and a pump you have a dewatering solution you can deploy within minutes. It’s the easy way to comply with the law and much more cost-effective than using third party contractors to clean or remove the contaminated water.

The Tri-Ball Float captures the oil where it accumulates most, at the surface of the coolant.  All steel construction and compact design make this an ideal floating skimmer attachment.  The Tri-Ball Vortex Floating Skimmer Attachment can be used with any coalescing systems.

Filters are designed to be used with a 2” pump. If you need greater throughput, consider using a Green Rhino Manifold to harness four, six or eight filters at once. Manifolds are available with 4” or 6” connectors.

The Skimpy Oil Traffic Controller saves coolant and work. The Universal Clamp works great for mounting both the skimmer and the oil traffic controller.

Floating oil SkimmerPrice

Sediment filters are the easy way to stay compliant with environmental regulations when dewatering excavations. They fit over the end of your discharge hose and filter out sediment. The cleaned water can be discharged directly into the environment or surface water drains.

Use the reusable cable ties provided with the dewatering filter. Tighten two around the collar of the filter to around 2/3rd the width of the hose. If pressure builds inside the filter, these are designed to break and release the pressure before damaging the filter. For this reason, do not use other methods such as chains or rope to secure the filter. If you have problems with filters becoming regularly detached then the flow rate is too high and/or you are not emptying the filter when full. If the flow rate is too high, consider using a Green Rhino Manifold to increase throughput.