*To adjust the holster cant, you will need to remove Molle Loks first.  Adjust the cant by loosening the 5/8” and1/2” flathead screws for plate mount, set to your cant angle preference and then retighten the screws.  Reinstall Molle Loksfollowing the procedure above.

Video instructions can be found HERE*To adjust the holster the holster cant, you will need to remove Molle Loks first.  Adjust the cant by loosening the 5/8” and 1/2” flat head screws for plate mount, set to your cant angle preference and then retighten the screws.  ReinstallMolle Loks following the procedure above.

Installation:1. Remove belt attachment w/1/8" allen wrench retaining Safariland threaded posts for step 4.2. Ensure 6 threaded posts are firmly installed into the T7 plate.3. Align T7 plate with holster, blocking toward holster.4. Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.5. Install 1/2" flat head screw and Safariland threaded post into bottom hole.6. Attach both Molle Loks to the plate with 6-5/16" flat head screws.

Step 4: Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.Step 5: Install 1/2" flat head screw and Safariland threaded post into bottom hole.