If you want to stop people driving over grass verges or parking on them then these are for you. They can be made from many materials, such as wood, metal and plastic. They block vehicles from driving onto the area preventing the ground from being damaged.

Designate lanes using a single or double solid white line, as well as a stenciled “BUS ONLY” marking (refer to MUTCD 3D.01). In some jurisdictions, markings may be required for each permitted user (e.g. “TAXI, LRT, BUS ONLY”).

Provision for curbside loading can improve compliance, such as timed freight parking on the other side of the street or around the corner from loading destinations.

All fixed bollards will need occasional cleaning to ensure that reflective surfaces stay visible. Otherwise, they are mostly a maintenance-free item.

You can see traffic bollards all over the UK road network. They are often seen on islands with a "keep left" arrow installed. Other types include lane delineators to help separate different lanes of traffic.

Wider sidewalks, especially those buffered with plantings or furnishings, increase pedestrian safety and comfort adjacent to curbside transit lanes.

There are many ways to install bollards, this varies depending on the type chosen and the material or surface you are fixing them into.

Curbside lanes may be separated with hard barriers (e.g. concrete curbs), which may be intermittent or continuous. Where nearly continuous, curbs should at least be omitted for short segments to allow buses to pass, or to allow buses to pass break-downs or incursions.

A curbside transit lane can have differing, flexible uses throughout the day, such as parking or a shared bus-bike use. However, full-time lane dedication improves integrity in some conditions.

Parking bollards are used to serve two purposes. They prevent access to parking spaces that are reserved for specific persons. Flexible parking bollards are fitted to parking bays to provide an indication of where the front of the bay is. This will not damage a vehicle should contact be made.

T2 lanerules nz

When you need a bollard that can be run over, it should be flexible. Installing a flexible bollard allows it to stand back up and recover from an impact. This makes flexible bollards ideal for parking areas and roadsides. Most flexible bollards are also reflective.

TransitlaneT3 meaning

Commercial car sales lots use security bollards to prevent vehicles from being stolen. Home users often use bollards in the same way on their driveway to ensure that cars and vans are not stolen.

Curbside transit lanes can be implemented with varying levels of separation, increasing service capacity and allowing riders to board directly from the curb.

This means that we have something to suit every budget and application. So that you, the customer can get the right item for your needs at a price you can afford.

All our bollards include fitting information and instructions making installation easy. This also ensures that you get great results from our bollards.

On very high frequency corridors where bus traffic is significant enough to create congestion, double transit lanes can be implemented curbside. The second bus lane should be designed as an offset transit lane.

In some areas, it is not always desirable to have bollards permanently installed. Where this is the case removable bollards are ideal. They can quickly and easily be removed and provide access to traffic that would normally be excluded. This is ideal for areas where high street events require vehicle access.

At Start Traffic, we offer a wide range of bollards for all scenarios. The range of bollards that we offer come in many shapes, sizes and materials. Which material you require depends on the application you want to use the bollard for.

Image

We only stock quality products that we would be happy to use ourselves. This allows us to sell our range of quality bollards with confidence.

Hinged bollards and removable bollards may need routine checking to ensure their mechanical functions work as intended, but this is simple and easy to carry out.

We stock and can source an unmatched selection of styles, materials, and quality of bollards. Our extensive stock covers everything from heritage bollards to security and flexible traffic bollards. We work tirelessly with many of the leading manufacturers to ensure that all our bollards are competitively priced without compromising on quality, ensuring you get great value for money and a great product.

These are a subset of security bollards that are ideal for home use or parking restriction. Most frequently made from metal these hinged bollards pivot and lay flat allowing vehicles to pass over them. They can then be raised to once again block access.

What is aT2 lanenz

Use security bollards to improve (as the name suggest) security. Security bollards are seen in commercial premises and domestic installations. They are used to restrict vehicle access, preventing either goods or the vehicles themselves from being moved in or out. A big favourite with car dealerships.

Enforcement is critical to the lane’s integrity. Vehicle-mounted video enforcement has demonstrated efficacy in improving transit lane compliance.

The lane adjacent to the curb can be dedicated to transit vehicles, especially on through corridors where parking is either not provided or not well utilized.

T2 lanefine

If 13 feet of width is available, full-time curbside bus lanes may be separated with left-side, traversable barriers, such as rumble strips. Separation is not appropriate in all contexts, and must be developed with special care for its impact on walking and bicycling access. If curbing or other hard separation is used, including mountable curbs, bus lanes should be designed to allow passing at selected points. The impact on snowplowing operations should be evaluated when considering the use of curbs to separate the bus lane from other traffic, in climates where snow is a possibility.

T2 lanefine nz

Where snow is a consideration, lanes must be cleared in such a way that plowed snow does not block the lane for transit vehicles. Stop locations must also be kept completely clear of snow at boarding areas.

Where rain pooling is an issue, gutters and drainage in bus lanes next to the curb must be kept clear to avoid splashing onto the sidewalk. Concrete gutters or lanes may be preferable for curbside bus lanes.

Image

T2 lanecameras

Timber bollards are excellent for use on heritage sites and woodland sites. They are low maintenance and excellent for protecting verges from unauthorised parking.

On streets with wide sidewalks and furnishing zones that provide space for shelters and strong lateral separation between passing buses and pedestrians in the sidewalk through-zone.

Transitlanesign

The pricing varies depending on the type of bollard and fixing that is required. Our cheapest verge marking posts cost as little as £15.75 + VAT compared to some of our more industrial-grade items which can cost up to and exceed £400.00.

Driveway bollards share a lot of similarities with security posts. They are used by home users to prevent expensive vehicles caravans or equipment from being stolen.

Industrial sites use bollards to protect expensive assets and ensure that vehicles are unable to access sites without passing security points.

These are decorative bollards and can also be reflective, anti-ram and even removable. Street bollards can be seen on high streets and pedestrianised areas all around the UK. They are often used to guide vehicles through pedestrian areas improving safety.

Image

If you are replacing cast steel items we have an excellent low-maintenance range of plastic items that look just like cast steel! These cost far less than their original counterparts.

Can you park in aT2 lane

Because bus stops are typically located directly on the adjacent sidewalk, stops must leave enough room for waiting passengers and passing pedestrian traffic.

The desired width of a curbside bus lane next to a mixed-traffic lane is 10–12 feet, including a gutterpan if present. Bus-only lanes should not typically exceed 12 feet in width. If target operating speeds between stops are low, typically below 25 mph, 11-foot lanes are preferable to 12-foot lanes. If buses operate in an adjacent lane, a 12-foot curbside lane is desired.

Our metal bollards are made from painted steel, galvanised steel or stainless steel. The desired look and application will dictate which material the bollard is made from.

As we have already mentioned bollards come in a huge variety of finishes and materials intended for many different applications. With so many options available, it is often confusing for the first-time buyer. For this reason, we have set out a simple guide to the types, materials, applications and installations that we offer.

The many types of bollards that are available are used by almost every sector of industry and even private homes. They are used by hospitals and schools to prevent inappropriate parking on verges.

© Start Traffic Ltd trading as Start Safety 2009 - 2024Registered in England with company number 6896587 and VAT registration number GB 970779374.

Anti-ram bollards are fitted with a strong internal post. They are used to prevent shop fronts or other assets from being damaged by an impact. Almost always seen outside shopping centres to prevent ram-raiding.

Plastic bollards make up a large portion of our flexible bollard range. Many of our flexible plastic bollards can be run over and stand back up again. Other plastic bollards can be fitted with a steel core, so they are still anti-ram.

We have the full range shown above in stock on the shelf ready to ship out next day, we offer special delivery services and can even arrange same day delivery on many products.

Give our trained sales team a call on +44 (0)1905 794875, they will help you in choosing a suitable system for your needs and will also be happy to discuss discounts for bulk quantity requirements and special delivery need.

Use Reflective bollards to warn of hazards and guide traffic. They are also used on pedestrian walkways and cycle routes. The reflective banding improves the visibility of the bollard ensuring it is seen even at a distance.