Material combustiblevscombustible

The basic requirements for a dust explosion to occur are that combustible dusts are suspended in air and are ignited. In practice, for a dust explosion to occur, a number of conditions must be met including:

Although every effort is made to ensure the accuracy, currency and completeness of the information, CCOHS does not guarantee, warrant, represent or undertake that the information provided is correct, accurate or current. CCOHS is not liable for any loss, claim, or demand arising directly or indirectly from any use or reliance upon the information.

Material combustiblepdf

Combustiblevs flammable

Deflagration is a term often used to describe combustible dust explosions. A deflagration is an "ordinary" fire such as a gas stove, burning wood or paper, and even the burning of gasoline vapour inside the cylinder of an automobile. In a deflagration, a burning substance releases heat, hot gases, and energetic particles or sparks that ignite and spread the fire.

Another example is Alberta's Occupational Health and Safety Code which defines combustible dust as "a dust that can create an explosive atmosphere when it is suspended in air in ignitable concentrations".

Material combustiblefire

There are many variables that must be considered - the particle size of the dust, the method of dispersion, ventilation system characteristics, air currents, ignition sources, confinement of the dust cloud, physical barriers, and so on. As a result, the often quoted "rule of thumb" about dust accumulation (such as being able to write in the dust, or the dust being the thickness of a paperclip, dime or quarter, or the amount of visibility through a dust cloud) is not always reliable.

The technical definitions for combustible dust vary. For example, the Hazardous Products Regulation (for Workplace Hazardous Materials Information System (WHMIS) 2015) defines combustible dust as " a mixture or substance that is in the form of finely divided solid particles that, upon ignition, is liable to catch fire or explode when dispersed in air".

The primary dust explosion is the first explosion. It occurs when there is a dust suspension in a confined space (such as a container, room, or piece of equipment) that is ignited and explodes.

Material combustibledefinition

Dispersion means the dust particles are suspended in air. (Note that flash fires may occur without the 5th element of confinement). Confinement means the dust is in an enclosed or limited space. This restriction allows pressure to build up, increasing the likelihood of an explosion.

Material combustiblemeaning

Note: It is very important to research the materials and products used in your workplace. Stating the possibility of a combustible dust hazard is now a requirement on the Safety Data Sheet (SDS) under WHMIS 2015. Older Material Safety Data Sheets (MSDSs) may not provide the same information so additional research may be necessary.  Other sources of information include to check if the material is classified as a combustible dust include referring to:

Figure 2 Figure 2 shows primary and secondary dust explosions. Figure from Occupational Safety and Health Administration (OSHA) and WorksafeBC.

Install smooth ceilings and other surfaces (instead of a rough finish) to minimize dust accumulation and to make cleaning easier.

A combustible dust is any material (finely divided solid particles) that has the ability disperse in air and catch fire and explode when exposed to an ignition source. Combustible dust may include materials that are in the physical states of powders, flakes, fines, fibers, etc.

Material combustibleexamples

Many materials can become combustible under specific situations. Workplaces may either purchase such materials for use, or generate dusts as part of their processes. Examples of materials include:

There are many, many more types of materials that may become a combustible dust. The US OSHA has created a poster which lists more examples.

Therefore any activity that creates dust should be investigated to see if there is a risk of that dust being combustible. Dust can collect on surfaces such as rafters, roofs, suspended ceilings, ducts, crevices, dust collectors, and other equipment. When the dust is disturbed and under certain circumstances, there is the potential for a serious explosion to occur. The build-up of even a very small amount of dust can cause serious damage.

Flammable andcombustible materialexamples

The Occupational Safety and Health Administration (OSHA) in the United States defines combustible dust as "a solid material composed of distinct particles or pieces, regardless of size, shape, or chemical composition, which presents a fire or deflagration hazard when suspended in air or some other oxidizing medium over a range of concentrations".

The National Fire Protection Agency (NFPA) defines combustible dust as “a finely divided combustible particulate solid that presents a flash-fire hazard or explosion hazard when suspended in air or the process-specific oxidizing medium over a range of concentrations” in Standard 652-2019, The Fundamentals of Combustible Dust.

The primary explosion will shake other dust that has accumulated. When this dust becomes airborne, it also ignites. This secondary dust explosion is often more destructive than the primary one.

In order to determine the level of risk from combustible dust, a risk assessment should be completed by a competent person (e.g., safety engineer, industrial/occupational hygienist, etc.).  A risk assessment is a process that determines:

In a dust explosion, the deflagration processes happens so rapidly that the heated air and gaseous fire products (such as carbon dioxide) produce extreme air pressure that can blow out walls and destroy structures.

Some of these materials are not "normally" combustible, but they can burn or explode if the particles are the right size and in the right concentration.

Dusts are created when materials are transported, handled, processed, polished, ground and shaped. Dusts are also created by abrasive blasting, cutting, crushing, mixing, sifting or screening dry materials. The buildup of dried residue from the processing of wet materials can also generate dusts. Essentially, any workplace that generates dust is potentially at risk.

The specific product or material may also cause health effects, such as lung disease or cancer, which is not addressed in this document.  Please see other OSH Answers on that specific product, or contact CCOHS’s Safety Infoline  (Inquiries Service) for more information.