Alle ordrer indeholder et miljøbidrag på 34,95 kr. inkl.moms. Vi har valgt et fast miljøbidrag uafhængigt af ordrens omfang og leveringssted for at gøre det nemt for vores kunder at gennemskue miljøbidragets størrelse.

Rp lighting

There are a few reasons for this, but it's primarily because leading-edge dimmers have a higher minimum load, and the lower wattage of LED bulbs means they are not guaranteed to function correctly when paired with them.

Maxima lighting solutions

The gang is the number of switches (or dials) on the dimmer. If you just have one light fixture in a room, then you just need a dimmer switch with one gang. If you have multiple light fixtures (e.g. several spotlights, or a ceiling and wall light), then you can dim them independently using dimmer switches with more than one gang.

Traditionally, dimmer switches have a minimum electrical load that must be met to guarantee that the switch operates smoothly. A switch with a minimum load of 10 watts, for example, needs a bulb (or bulbs) totalling a minimum of 10W connected to it for it to function correctly. Anything lower than this and you may experience a flickering or stuttering dim.

Gennemfør et køb, så er du registreret som kunde og kan næste gang logge ind når du skal handle hos Lomax. Du kan også oprette en profil

Hinkley lighting

If you're not sure where to start with dimmable LED lighting, the following guide will hopefully provide some answers. If you need any further help, don't hesitate to contact our friendly and knowledgeable customer services team.

Cwi lighting

The maximum load is the opposite. Ensure that the total wattage of the bulbs and fittings connected to a dimmer switch do not exceed this maximum load, in order to prevent faults. With LED bulbs, this is slightly more complicated, as the maximum load can't necessarily be taken at face value. Read on for more details

ARTCRAFT lighting

Spejlkuplen har en observationsdistance på 21-30 m, hvilket gør den perfekt egnet til overvågning af salgs- udstillings- og butikslokaler. På plane flader kan spejlkuplen monteres med skruer. Derudover tilbydes et kædemontagesæt, der muliggør ophængning op til fem meter under loftet.

No, not all LED bulbs are dimmable. LED bulbs are manufactured with different circuits that determine whether they are dimmable or non-dimmable, and they are not interchangeable. If you try to dim a non-dimmable light bulb, it may create an unpleasant flickering effect, and is likely to damage the bulb itself.

There are two types of dimmer switch available: leading-edge and trailing-edge dimmers. Some retrofit LED light bulbs and fittings have drivers that allow them to work with either type, but for a better chance of the dimmer operating correctly, choose a trailing-edge dimmer.

The low wattage of LED bulbs means that in theory, you could connect numerous bulbs to the same dimmer switch. If you have a dimmer switch with a 400W maximum load, for example, then surely you could connect 80 5W LED bulbs to it (80 x 5W = 400W)? This is not the case, however. LED lights generate an inrush (or spike) of power when switched on, which may exceed the stated wattage of the bulb momentarily.

Når du handler hos Lomax, opsparer du altid mindst 5 % i bonus, og vi sætter automatisk din bonus ind på din kundekonto. Du opsparer bonus på alle dine køb i ét kvartal, hvorefter du kan handle for det opsparede beløb i det efterfølgende kvartal.

Ellers koster fragt:   Levering til udleveringssted: 49,-  Levering til arbejdsplads: 39,- Hjemmelevering: 59,- Levering til Lomax butik: 0,-

Nora lighting

Access lighting

Gennemfør et køb, så er du registreret som kunde og kan næste gang logge ind når du skal handle hos Lomax. Du kan også oprette en profil

Kichler lighting

Dimmable lights provide some additional versatility, allowing you to find the perfect brightness for the mood you want to set. With the rapid development of dimmable LED lighting comes smoother control, silent running, soft start and multi-way dimming. it is now easier than ever to find the right setup for your LED lighting.

A rule of thumb commonly used to calculate a load for LED dimmers is to divide the stated maximum load by 10. For example a 400W dimmer switch should have no more than 40W of LED bulbs connected to it, which would equate to eight 5W bulbs.

Miljøbidraget er beregnet og sandsynliggjort ud fra de miljøomkostninger, som Lomax samlet set årligt forventer at afholde. Disse miljømæssige omkostninger dækker over:

All LED light bulbs should clearly indicate whether they are suitable for dimming or not, both on the packaging and in online product descriptions.