use ofcollimatorin x-ray

The tightened grub screw and the "right-hand orientation rule" for the connector, ensure a high reproducibility in mode field position and angle, which is especially important for attaching and reattaching polarization-maintaining fibers reproducibly.

Thanks to the decisive advances of higher speeds and lower noise, CMOS sensors have been firmly established with their groundbreaking sensor technologies, superseding CCD sensors in many areas of industrial image processing. Along with high resolutions, frame rates and low power consumption, today's CMOS sensors also offer an excellent price-performance ratio.

Industrial cameras with CMOS sensors perform precise image evaluation at high speeds. Find the right camera for your application quickly with information on features, operation, and the performance review.

Beam collimatorcost

Generally, with any FC PC or FC APC type connector there is a freeplay when inserting the fiber into the fiber coupler. The free play in between the connector ferrule and receptacle is only a few microns, but necessary for inserting the ferrule without force. There is a difference between the receptable and key width for wide key (2.14 mm) and narrow key (2.0 mm) fibers. If you follow the so-called "right-hand orientation rule" you can reproducibly attach and reattach even PM fibers with narrow key receptacle to fiber couplers with wide key receptacle without difficulty.

Collimatedbeammeaning

When the ferrule tip is safely located in the inner cylinder of the receptacle, align the connector to the receptacle axis and carefully introduce the connector into the fiber coupler.

Collimatordiagram

High frame rates, exceptional image quality and ease of integration – that’s what our industrial cameras stand for. Their robust, industrial design is the basis for long-term stability and precise image analysis in your application. The portfolio includes CMOS-based matrix cameras in color and monochrome versions with resolutions up to 65 megapixel. 25 years of expertise make us understand your requirements to provide the optimum product for your application.

To prevent damage to the sensitive fiber end-face, always insert the fiber connector`s ferrule at an angle, with the connector key properly aligned to the receptacle notch.When the ferrule tip is safely located in the inner cylinder of the receptacle, align the connector to the receptacle axis and carefully introduce the connector into the fiber coupler. Then, orient the connector key in a way that it is pressed gently onto the right-hand side of the receptacle notch ("right-hand orientation rule").Gently screw on the connector cap nut onto the receptacle until it is finger-tight.Gently tighten the fiber grub screw to reduce the free play of the ferrule in the receptacle.

Beam collimatorfor sale

To make your vision application future-ready, simply rely on our high-performance industrial cameras with the latest CMOS sensors:

This downloads section only includes general downloads for the complete series.Please access the individual product pages (using the product configurator, the product list, order options or the search button if you have a complete order code). Here you will find specific downloads including technical drawings or stepfiles.

When the ferrule tip is safely located in the inner cylinder of the receptacle, align the connector to the receptacle axis and carefully introduce the connector into the fiber coupler. Then, orient the connector key in a way that it is pressed gently onto the right-hand side of the receptacle notch. The tightened grub screw and the "right-hand orientation rule" for the connector, ensure a high reproducibility in mode field position and angle, which is especially important for attaching and reattaching polarization-maintaining fibers reproducibly.