Syntec Optics uses well-established principles to design, optimize and calculate the performance of optical coatings. An optical coating is one or more thin layers of material deposited on an optical component such as a lens or mirror, which alters the way in which the optic reflects and transmits light.

Customers reach out to Syntec Optics for their precision optics elements and systems needs. We assist them with the design for manufacturability approach and suggest the best suitable manufacturing method (diamond turning, molding) and materials (polymers, optical-grade glass). After fabrication, the precision optics are coated and assembled depending on the product requirements. If the application demands, the precision machining unit produces optomechanics. All components and systems then go through quality assurance, ensuring everything is as per specifications.

The objective in Figure 1 has mounting threads that are 20.32 mm in diameter with a pitch of 0.706, conforming to the RMS standard. This standard is currently ...

Many commercial LWIR lenses are currently two-element solutions.Diamond turning is a main component of the manufacturing requirements, although AR coatings are also a critical part of the process. Coating IR materials can be quite challenging and expensive because of the relatively thick layers that are required.

Syntec Optics is your answer for reduced development time and optimum performance of your optical assembly project. Our optical alignment and assembly capabilities include applications like mounting, alignment, beam manipulation and focusing. Efficient optical systems require carefully matched components.

Nikon's proprietary annealing process yields unsurpassed refractive index homogeneity. NICF Transmittance range. F2. 157 nm. ArF. 193 nm. KrF. 248 nm.

Our manufacturing team selects the most suitable optical materials – polymer or glass, depending on the application. Consequently, the material selection approach helps to achieve desired properties in high-precision optical components. In addition, we produce laser optics, achromatic lenses, infrared optics, and optical prisms. Customers benefit from our precise custom optics solutions.

Tooling and optics tolerances are tightly linked since achieving the latter requires the former. We build all tooling in house, including molds to produce lenses as small as 0.5 mm, which requires tolerances of a quarter of a fringe. Tolerances, however, are significantly affected by the overall design and the choice of materials.

Precision optics are used in optical systems for medical (diagnostic imaging, microfluidics, lab-on-a-chip, point-of-care devices), consumer (cameras, AR/VR headsets, LiDAR), defense (aiming, targeting, guides), and biometrics (fingerprint, iris, facial imaging) applications.

Optical Micro Lenses are often helpful with reducing weight & package size. The component reduction is obtainable with DFMA (assembly) features added to the lens design. Product examples include Imaging (Camera), Illumination, Scanning, Projection, Exploratory or Invasive optical products.

Contains a approximate 3" x 6" sample of each color and diffusion. Users will find all the familar data, such as wavelength chart and transmission data ...

helping YOU make the best cable assemblies in the world. The Fiber Optic Center (FOC) Technical Team is available for product demonstrations and manufacturing ...

Syntec Optics was commissioned to build a tool for a prism which would be used in an optoelectronic assembly. During the tool build, our customer decided to change the optical prescriptions of the aspheric surfaces. Such a change can delay the delivery of a tool by weeks.

Optics manufacturingnear me

Customers engage Syntec Optics to conduct diffractive designs. Once the suitable material is determined, the first step of the design investigation is to design a single element. The design is optimized at a single wavelength and aspheric terms are added to both surfaces. The correction with up to 6th order aspheres is quite good.

Precision Optics applications are rapidly expanding. They find numerous applications in medical, consumer, defense, and biometrics fields. Therefore, with our innovative approach, Syntec Optics developed high refraction diamond turning technology (HRDT). This technology helps maintain high-level precision in optical elements. Similarly, we also reinvented plastic optics applications and tolerances. As a result, many OEMs use our precision molded plastic optics solutions for their critical applications.

Syntec Optics is not merely an optical lens manufacturer but a complete high-precision optics solutions provider. It is a significant independent player in the optics and photonics industry. The vertically integrated structure reduces lead time and improves delivery timelines.

Optics manufacturingcompanies

Lenses, mirrors, prisms, spheres, aspheres, freeforms, cylinders, domes, wedges, wafers, windows, and microlens arrays are some examples of precision optics.

Optical Bandpass Filters are used to transmit selective wavelengths of the spectrum while attenuating all other wavelengths. Syntec Optics produces complex optical coatings on plastics. Bandpass filters on the glass are relatively straight forward to produce. Coating design on plastic substrates is complicated.

PE-Cyanine®5 (PE-Cy5) is a red-emitting tandem fluorophore that combines phycoerythrin (PE) and Cy5. The donor molecule, PE can be excited by the 488-nm blue, ...

Optical lensmanufacturingprocess PDF

Syntec Optics has deep expertise in anti-reflective coatings. Anti-reflection coatings are used to reduce reflection, increase transmission and enhance the contrast of your optical systems suppressing residual reflection or eliminating ghost images.

Our deep experience with polymer optics affirms the links between success, collaboration, and integration. These concepts are at the center of how we work. Integration leads to reducing costs while exceeding requirements. Collaboration continuously taps the wisdom of all team members.

Optical Lensmanufacturingmachine

Syntec Optics has developed thin film technology for plastic optical systems. Thin film technology is a process by which very thin layers (nanometers in thickness) are deposited on a substrate. Electronic semiconductor devices and optical coatings are the main applications benefiting from thin film deposition.

Precision optics are optical components of various geometries and materials. They are used in optoelectronics, electro-optics, and optomechanical systems for light imaging, sensing, detection, and transmission applications in different wavelength bands.

Syntec Optics offers deep expertise in both moldings opaque and optical polymers. For over ten years, we have been manufacturing complex custom optical components, such as plastic Plano prisms and additional plastic optics and combining them as required to form complete optoelectronic solutions.

Precision optics are manufactured using a number of processes depending on the application and material requirements: plastic injection molding, glass molding, and diamond turning.

The measure of our skill as a custom optics manufacturer is ultimately the success of our customers. Browse to see examples of how Syntec adds value.

Syntec develops many designs during its investigation process after the camera applications are reviewed. Material selection is key, germanium (Ge), which has almost twice the index of refraction compared to ZnS (i.e. 4 to 2.2). The two element Ge design provides significant improvement in imaging.

EdmundOptics

Syntec Optics is an American optical manufacturer of precision optics. Since its inception in 1981, it has grown into what has now become a fully-integrated offering of precision optics manufacturing. Our precision optical solutions include optical components of various geometries, polymer optics, glass optics, diamond turning optics (both prototype and production), optical systems, and optomechanics. Our in-house optical design, optical assembly, and optical coating services make it a complete development solution for customers. To ensure quality, we have excellent metrology and testing setup.

Precision molding of lenses using Chalcogenide glass affords considerably less expensive production cost in large quantities compared to SPDT (single point diamond turning) and a definitive and competitive price-performance ratio. Chalcogenide glass has attractive optical properties over broad IR spectrum.

Make use of our high-quality and easy to use 1/16 Inch Allen Wrench tool for easy installation. Shop more on our website!

Product Features · Connect a USB 2.0/3.0 Type-A port to a USB 3.1 Type-C port. · Sync and charge USB 2.0 and 3.0 flash drives, keyboards, mice, and other ...

Optics manufacturingprocess pdf

Not all polymers are created equal. Also, each type has many grades that affect important characteristics such as flow, purity and environmental durability. Syntec combines and processes different types to achieve your unique goals, and regularly finds breakthroughs with broad applicability.

Imaging optics applications are increasingly using freeform optics. Augmented and virtual reality head-mounted displays greatly benefited from freeform optics. One freeform element replaces several conventional rotationally symmetric elements. As a result, optical engineers can make miniaturized optical devices. Syntec Optics has overcome the challenges in manufacturing such complex surfaces.

Precisionoptics manufacturing

EVA (Ethylene Vinyl Acetate) foam grip enables better hold on rod under wet working conditions. Patented built-in push-lock pin system on extension tubes ...

Opticalmanufacturingjobs

Polymer optics offer serious advantages in terms of their lightweight, low cost and high malleability. The key manufacturing techniques of injection molding or diamond turning ensure 100% repeatable levels of precision, levels difficult to achieve using more traditional glass solutions.

The Siegmund 4mm Hex Wrench is the most practical tool for tightening bolts quickly and safely. The 4mm Hex Wrench is perfect for clamping of clamping bolts and screw clamps.

Synchronizing assembly with your distribution needs is a critical factor in your program’s success. Whether you require one-time or ongoing optical assembly, Syntec Optics can offer a precision electro-optical assembly-line in a cleanroom environment, enabled by skilled technicians supervised by expert engineers.

Laowa Makroobjektive ... Das äußerst kompakte 2:1 Tele-Makro-Objektiv für spiegellose Vollformatkameras mit einem Bildwinkel von 28,55 Grad ist ein sehr kleines ...

This is accomplished by high-power IR floodlights, commonly known as heat lamps. Similar bulbs can also be used to warm animals or people in cold weather. A ...

We develop the best, most cost-effective solutions to today’s optical engineering challenges. These solutions may utilize some of the unique capabilities of plastic such as aspherical surfaces, diffractive surfaces and molded in mechanical features that promote alignment accuracy and economical assembly.

A Fresnel Lens is a lens that uses a series of annular rings of spherical lenses set at various angles to produce a lens with a very short focal length relative to its diameter. The Fresnel lens will also be much thinner (using less material) than its corresponding spherical lens.

Customers engage Syntec Optics to conduct optical design development of LWIR lenses. An example is a request for the following specification: 25 mm EFL, f/1 and a FOV. The camera chip size is 640×512 with 17 μm pixels so the diagonal is 13.93 mm, which yields a nominal FOV of ±15.57°.

The Equal Employment Opportunity Clause required under Executive Order 11246, and the employee notice clause pertaining to employee rights under the National Labor Relations Act, set forth in 29 CFR Part 471 Appendix A to Subpart A, are incorporated by reference in this purchase order. By accepting this purchase order, vendor additionally certifies that, to the extent applicable, this contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability, that it complies with the authorities cited above, and that it does not maintain segregated facilities or permit its employees to perform services at locations where segregated facilities are maintained, as required by 41 CFR 60-1.8.