Function ofstagein microscope

The SXV-AO-USB is the 3rd generation of Active Optics from Starlight Xpress. The original design has been further developed for use with larger imaging sensors and with USB connectivity, future proofing the design further.

With the AO switched on. (The short coloured spikes on the bright stars were produced when the AO switched off for image download)

Structure andfunction of eyepiece in microscope

The optical components of the microscope are used to observe, enlarge, and generate an image from a sample put on a slide. These parts consist of the following:

The optical corrections are controlled by 4 stepper motors, so the small amount of movement, combined with the lightweight mass of the optical window, allows the corrections to be implemented very quickly and much more accurately than the mount drive system is capable of achieving.

What iseyepiece in microscope

Function ofbody tubein microscope

If you subscribe, we will use and store your information to send related content, information about our products and offers. You can unsubscribe at any time.

No processing was applied, other than cropping, so that the images are essentially ‘raw’. The mount used was a Celestron CI700 with a C11 SCT at F10

Function ofarmin microscope

If you have a new USB AO unit that needs programming, please download the current USB AO utility and firmware version version 201.

Ideally suited to longer focal lengths optical systems, the benefits of the Active Optics on the final image can also be seen with shorter focal length systems on less accurate mounts.

The patented principle uses the refractive index of the optical window to move the incoming light path from the telescope on to the main imaging sensor. When combined with a sensitive guide camera, like the Lodestar PRO, you have a high performance tracking system that is far superior compared to autoguiding on its own. Mount correction is also included so the system is self contained and can run all night, even if there is drift due to poor alignment on the mount.

This combination uses ideally suited to using the LodestarPRO or Ultrastar PRO to view the edge of the telescope field via a 10mm square prism and provides accurate positional feedback to the control software. Unlike cameras with an integrated guider chip, the OAG puts the guide camera ahead of any filters that the user fits into the camera ring recess and so its sensitivity is always at maximum. The guide camera mounting is designed to be parfocal with a SX camera when used in this combination – fine focus adjustment is provided by moving the threaded guider mount along the prism tube. If you do not need the OAG barrel (e.g. when using a filter wheel such as the MIDI or MAXI filter wheel by SX which has a built in OAG or a camera with a built-in OAG or guide chip), you can fit the 72mm or T adaptor directly onto the rear of the AO assembly.

Microscopeparts and functions

Function ofnosepiecein microscope

The guide camera images a star through an off-axis guider (OAG), either supplied with the AO Unit, or through an OAG built into a filter wheel such as the MIDI or MAXI filter wheels from SX. The software calculates the centroid of the guide star rapidly and accurately, and if the guide star moves, the optical window can be adjusted to compensate for the movement of the guide star. As the guide camera and imaging camera are looking through the same optical system, any corrections made for the guide star are automatically translated through to the main imaging camera.

The AO Unit comes complete with 3 adapters: • Male T-thread (42x.75mm) for the camera side • Female T-thread (42x.75mm) & Female SCT Thread for telescope side If you would like an additional adapter choose one from the the list below:

Here are some ‘extreme’ images from an Ultima 2000 on a fork mount with poor polar alignment and rapid gear errors. The camera was an SXV-M8C and the images have been resampled to 50% of full size for display.

WARNING – this version of the update is applicable to ONLY older versions of the AO unit (pre-USB input). DO NOT load the update into a USB version or it will become unusable!! The warning in PHD2 should be ignored.

The structural components of a microscope are used to hold and support the instrument and its parts. The optical components are used to magnify and view the images of the specimens.