The following is the listing of our standard achromatic lenses.  They are all designed to achieve a wave-front aberration <1/4 wavelength.  You can also use lens design wizards to design custom achromatic lenses. Achromatic elements have a Minimum Order Quantity (MOQ) ranging from 100 to 1,000 units.

Laser burn papernearby

Laser burn paperprice

Achromatic doublet lenses ("achromat") are designed to eliminate chromatic and spherical aberrations inherent in singlet lenses.  When used on-axis,  an achromatic lens focuses an parallel input beam to a perfect "point", limited only by the effects of diffraction. This performance can be achieved over a broadband of wavelength.   Achromatic lenses can be used to collimate and focus laser beams.  They can also be used for high-quality imaging on-axis.  However,  the off-axis performance is significantly worse than the on-axis performance.  If your application requires good optical performance off-axis as well as on-axis,  multi-element lenses such as our digital imaging lenses are recommended.

For some applications it is desirable to have a high-quality lens with a lower f/# (for example,  collimating a diode laser with large divergence angle).  This can be done by adding a matching aplanatic meniscus lens to a doublet lens.  An aplanatic meniscus lens will shorten the focal length of the doublet lens (thus, lowering the F-num) without introducing additional spherical aberrations.