CS-mount diameter

If the laser is a Gaussian wave, the divergence angle (half cone angle) is · angle = wavelength/(pi * beam radius). · So, to have a least possible ...

With this knowledge, the customer was able to assess their rental fleet, contract terms and usage to identify surplus rental units that were not needed. By doing so, they were able to reduce their rental fleet costs by 89% within one year.

Aug 20, 2020 — All of that is in the Type 3R specification as well as 4 and 4X, but IP67 is an indoor spec regarding dust (6) and water (7) ingress protection.

CS-mount camera

A leading manufacturer of building products and solutions was managing hundreds of lift trucksacross 26 locations, which proved to be a challenge. Add limited truck usage data and maintenance spend details to the mix, and things got even more complex.The company decided it was time to take a deeper dive into truck usage per location and address perpetually high maintenance costs, so they could make informed decisions to help improve their bottom line.

Both the C and CS mount are 1 inch wide (25.4mm) with 32 threads per inch (0.03125 inches or 0.79375mm). This dimension comes in handy if you need to insert a spacer to obtain proper focus. Unscrew the lens (or unscrew the camera from the mount in the case of telescope use and count the turns until proper focus is obtained. Multiply the above dimension by the number of turns to obtain the needed spacer or washer. (Washers are sometimes used as spacers if there are enough threads available.) Example: 1.25 turns x 0.79 mm = 0.9875 or ~1 mm. Many cameras (especially newer ones) have set screws to allow small adjustments in the distance between the lens and the image sensor.

2021928 — Understanding how different types of lens distortions work and the optical aberrations that they produce can help you avoid them in your own photographs.

Hundhausen put the customized Hyster big trucks to work optimizing productivity in the “Gates of Hell.” The steel roof and heat resistant front screen of the cab on the big trucks help protect operators and equipment from sparks and hot, flying debris.

C mount vs cs mountnikon

Powerful and reliable twin beam detector. 20m, 35m, 70m & 90m available.

To gain the insight needed, the customer decided to utilize Hyster® Fleet Optics™. This consultative service gave them a dedicated industry-specific fleet expert who would continually evaluate their lift truck data, providing details and recommendations to increase uptime and lower total cost of ownership. Detailed data analysis and services included:

c-mount thread dimensions

CS Mountadapter

If you are using a zoom lens and notice that the system goes out of focus as the zoom is changed the distance between the lens and the image sensor needs to be changed. Set the lens for infinity focus. Zoom to wide angle and point the camera at a distant object or star. Adjust the distance between the lens and the image sensor for proper focus. Go to maximum zoom. Slightly adjust the focus ring on the lens to refocus the image if needed. The system should now maintain focus from minimum to maximum zoom. You may need to repeat this process more than once to refine the focus.

Plasmid G protein alpha-o-YFP from Dr. Catherine Berlot's lab contains the insert G protein alpha-o internally tagged with EYFP and EE epitope and is ...

Chromatic aberration is a kind of defect commonly found in simple lens systems caused by a variation in the index of refraction with wavelength. Different ...

c/csmount

This Half White Diffusion Gel Filter for Inca/Sola 12 Fresnels from Litepanels is a 12" diameter translucent filter that softens shadows and reduces the ...

Shop magnifying glasses at Micro Center: headband magnifiers, soldering stand magnifiers, pocket magnifiers.

CS-Mount lens

Now the customer can focus on what’s most important to them, running their business, while leaving fleet management to the experts – Hyster Fleet Optics.

Another cost savings opportunity discovered was avoidable damage. Multiple facilities were revealed to have frequent and high lift truck repair costs. Hyster Fleet Optics was able to identify the factors causing the damage and high repair costs within each facility. And as a result, the company took action to reduce these avoidable expenses, resulting in 90% lower repair costs at these locations.

Aug 30, 2019 — It's the part that sits in closest proximity to the specimen being examined, gathering light to produce optimal images for observation and ...

CS mountto C-Mount adapter

Overview: An infrared camera can allow us to see wavelengths beyond what our eyes can detect. Near IR can be used for medical diagnostics, to study agriculture ...

Using Fleet Optics, Hyster was able to identify numerous trucks at various locations that the customer did not realize were long-term rentals but were still paying for on a monthly basis. This sometimes happens with large companies, where rental units are absorbed into their fleet without knowing they are rental units, while still paying hefty rental fees.

The physical difference is the CS mount lens is designed to be mounted ~5mm closer to the image sensor than a C mount lens. (C-mount lenses are designed to be mounted 17.526mm in front of the image sensor vs. 12.5mm for CS-mount.) You can always use a C mount lens on a CS mount camera by using a 5mm spacer ring (many cameras now have C/CS selectable adjustment screws or rings). You can never use a CS mount lens on an older style C mount camera unless you are willing to physically modify the camera. Cost wise the CS mount lens is much less expensive since it uses fewer glass elements. Quality of image is the same. C mounts are becoming less and less popular and are generally only used on the more telephoto focal lengths such as 25, 50 and 75mm, and bigger zooms.

For more details on Hyster Fleet Management Services, please contact HysterFleetSales@hyster.com or visit www.hyster.com.