If you describe something as optic, it has something to do with eyes or vision. Your optic nerve, for example, sends information to your brain from your ...

Diffused lightExamples

In order to produce this light, I need a light source that is relatively small in comparison to my subject. I will use a magnum reflector that is specular and small in comparison with the subject.

It is important to understand that no light is perfectly diffused or specular. That depends on the surface you’re photographing as well as the modifier interior. Specular and diffused co-exist together and it’s a sliding scale from one to the other.

Therefore, producing soft but specular light is in most cases impractical and undesired. You can, however, use a modifier producing soft light for photographing metallic objects. They will give off specular reflection, while the light will also stay quite soft on other parts of the image. Nonetheless, that won’t be a soft specular light per se.

Both the hardware and software in B&R's vision solution are fully integrated in the control system. This is the only way to achieve absolute precision and ...

So, the only way to tell if the light is soft or hard is by looking at the dark shadow edges. If you think about it, it makes sense. Hard light denotes hard shadow-highlight transitions, while soft denotes soft shadow-highlight transitions. It has nothing to do with contrast or any other property of light.

Diffused lightceiling

As you can see, there is no difference between 2 or 3 layers. The only difference is actually the power. Power is critical, especially if you’re working with battery-powered lights.

Samyang MF 100mm F2,8 Makro Canon EF Optimaler Bildwinkel – perfekte Nahaufnahmen Das Samyang 100 mm Makro Objektiv ist eine klassische Portrait-Brennweite, ...

Diffusedlighting interior design

A grid will reduce the light spread, but diffusion will increase. So, how do photographers get diffused yet gridded light? The secret is in placing diffusion behind the grid. It is intuitive with softboxes, but with hard reflectors, many tend to put their diffusion after the grid. That defeats the purpose of the grid.

Diffused Lightfor Room

Specular reflections are simply known as direct reflections. They are extremely bright and can only be seen from a particular angle. Therefore, a specular light will be essentially the flash tube reflecting off a metal surface. It will generally be rather uneven with hotspots in the middle.

Adding diffusion will change the size of your light source and make it even. This is because the light transmitted through the fabric will strike the surface from a wider family of angles, decreasing contrast. Moreover, diffusion will negate the hundreds of hotspots on a reflector, which will technically make the light source larger. This is best seen in small rooms with white walls where the light can bounce.

Depth of field calculators ; Focal length: f = mm ; Aperture: N = f / ; Object distance: xo = m ; Circle of confusion: c = mm.

Diffused and soft light are often used interchangeably among photographers. Indeed, to an untrained eye, the two can sometimes appear to be the same. Furthermore, modifiers such as softboxes that give both soft and diffused light make it hard to spot the difference. Nonetheless, diffused light is not necessarily soft, and soft light is not necessarily diffused. As a photographer, I previously used diffused and soft interchangeably without ever giving it much thought. Of course, it is a lot easier to tell a difference between soft and hard light. But diffused and specular not so much.

Jan 24, 2024 — Standard image-conditioned diffusion models historically fail to adequately retain fine details critical to product realization. In response, ...

Although soft and diffused tend to co-exist in a lot of cases, it is still important to know the difference in order to have as many tools as possible to create your vision.

Some photographers that confuse diffused and soft light tend to add more and more layers of diffusion to their light in order to achieve softness. It only makes sense to add no more than 1 stop of diffusion — beyond that you will be losing power without any noticeable effect.

Z Cheng · 2024 · 3 — While in a remote phosphor LED, the phosphors are coated on a transparent carrier and separated from the LED chip. This remote structure design greatly enhances ...

Photographers tend to confuse specular light and call it a bunch of things it isn’t. In fact, there is no such thing as specular light — there are only specular reflections.

Diffused lightbulb

A trip to Marrakech inspires this jewelry collection with elegant and new shapes that remind us of a walk through a city filled with exoticism and mistery.

202288 — The clear aperture indicates the optical area meeting quality standards, with tolerances impacting performance and manufacturing complexity.

Now, I will not change anything except for adding a layer of baking paper on my reflector. It is still relatively the same size of the light source, although, technically it is bigger because the diffusion is the light source, not the individual points of reflection on the reflector.

A specular light will be very uneven in coverage. It is characterized by a bright highlight, often a small spot. More often than not, a specular reflector will produce abruptly graduated shadows (assuming it’s close enough to have some softness). The color will be a lot more saturated in this image.

What isdiffused lightfor plants

IRUSB is designed to be nearly invisible. It is smaller than a standard USB cable, doesn't need a power supply, and the IR/Motion head is tiny and colored to ...

Diffused lightphotography

Adding both diffusion layers to the 3-foot octabox will make the light a lot more even and result in light with gradated smooth shadow edges that are both soft and diffused. They are soft because the light source is large in comparison to the subject, while diffusion is defined by the light is a lot more even on the whole image.

abbreviation Chemical warfare. American Heritage Continuous wave. American Heritage Clockwise. American Heritage letter The third letter of the English ...

Diffused lightarchitecture

Light has two qualities: either soft or hard. Diffused or specular are a sliding scale and co-exist in 99% of all situations. You can combine soft with specular and hard with diffused, although a soft specular light will be hard to achieve (I couldn’t within my small living room studio).

When we diffuse light, the diffusion material is relatively big. It is common to have big diffusion materials lying around. So often adding a 12×12 scrim to a hard light source will on one hand diffuse but also make it extremely big and hence soft.

Everyone has their own definition of this light type, so before I start, let’s all agree on what these different types of light are.

A softbox may be the intuitive solution for this, but let me explain why it won’t work. A softbox with diffusion removed is nothing more than a flash tube with a poorly-lit interior of the softbox. For all intents and purposes, removing diffusion from a softbox will render it useless as you’ve exposed the flash head.

Hard light is light produced by a small light source relative to the subject, and the shadow to highlight transition will be very sudden. Shadow edges are defined.

Nonetheless, you can see that the light has become more even. It covers a larger area as well, and because my makeshift studio is very small, the contrast is also decreased.

Soft specular light is relatively hard to achieve. Let me detail why. As we established, a specular light is a light that is reflected in a small family of angles. Soft light on the other hand originates from a large light source. This implies that we would need to find a way to reflect a large light stamp in order to create soft but specular light.

Soft light is light produced by a large light source relative to the subject, the shadow to highlight transition will be gradual. The shadow edges are wider and fuzzier.

It is important to know that when you’re diffusing the light source with a scrim as well as trying to make it soft you need to move the scrim away from the light source. As your light source has become the scrim itself, you need to control the scrim-to-subject distance in order to control softness.