Polarized Light Microscopy - plane polarization

 2024-10-29 19:43:35

Multi-Axis Slide Packages are Available Upon Request. Call 1-800-513-3163 ask for Mike Quinn Basic linear slides are just that...basic. They are easy to understand, install and get the job done. Basic Slides come in 3 sizes and offer two, carriage sizes: single ( 2 bearings ) and double ( 4 bearings ). The end support blocks offer a simple clamping and mounting design in one. Lastly, you have 2 bearing packages: steel linear ball bearings or our Minuteman PTFE Composite, Self Lube linear bearings. Basic slides offer some special options: Lightweight ceramic coated aluminum shafting (only when used with Minuteman PTFE Composite Bearings) FDA/USDA/Washdown Compliant Ceramic Coated Aluminum Carriage Plate, Shafting, End Support Blocks and Minuteman White PTFE Composite Bearings Please call for additional information on these options: 1-800-513-3163

Since the 2000s, many big time filmmakers have dabbled with IMAX. Some going as far as to film a large chunk of their movies with these cameras, lenses, and film stock. Christopher Nolan is easily the patron saint of IMAX (and physical film). Almost all of his films from the last ten years have used IMAX photography extensively. The use of such large film stock to aid in spectacle has helped Nolan’s directing style stand out in contemporary cinema.

VistaVision from Paramount Pictures found a new way to use 35mm: horizontally. Film is typically shot and projected vertically, but VistaVision went horizontal in order to use more space on the film strip, which resulted in higher quality imagery and double the perforations (on each side).

FDA/USDA/Washdown Compliant Ceramic Coated Aluminum Carriage Plate, Shafting, End Support Blocks and Minuteman White PTFE Composite Bearings Please call for additional information on these options: 1-800-513-3163

We’re in a golden age of TV writing and development. More and more people are flocking to the small screen to find daily entertainment. So how can you break put from the pack and get your idea onto the small screen? We’re here to help.

There are a variety of film gauges that have existed since the beginning of photography and filmmaking. But before we dig too deep into the most popular and used formats, let us first provide a film gauge definition that works for all gauge types.

It does not get more traditional than 35mm, easily identified by four perforations on each side of the frame. It has remained the standard since movies were first invented in the 1890s. The majority of movies that were shot in the 20th century were done on 35mm film stock, which also resulted in variations and innovations during that century.

Often using a standard aspect ratio of 2.2:1, companies like Todd-AO were at the forefront of this very special film gauge, which intentionally emphasized spectacle. This meant that films shot and projected in this film gauge were meant to be shown at limited engagements, as well as show off the tech used to film the movie. There was also Ultra Panavision 70, which extended that ratio to 2.76:1, but not too many movies used either of these processes.

Film gauge is the literal width of a film strip, as measured in millimeters. This width can determine the quality of the film itself, how much light passes through it (during filming and projection), and the literal size of the film strip. All types of film gauges bring with them unique advantages and disadvantages. All of which contribute to the overall look and feel of any given production.

Due to its special look and feel, on top of being cheaper than 35mm, 16mm film gauges have stayed popular with different types of filmmakers. And unlike 8mm, there are very notable films that have been shot on standard and/or Super 16mm, with some filmmakers actually choosing it as a primary format.

Linear slide bearingsprice

LM76 will cut shafting to accommodate your stroke requirements P/N Load N Load lbs. BS6-S 44.5 10 BS6-D 89 20 BS8-S 47 10.5 BS8-D 95 21 BS12-S 110 24.5 BS12-D 127 28.5 NOTE: The BS 6 Slide is not available with the "M" ( PTFE ) Style Bearing.

However, the dream of ‘Scope-without-anamorphic' came with Super 35, a process which, like Super 16 and 8 before it, simply used more of the space in a film gauge. Taking all that native space available, films shot in Super 35 were often aiming for a 2.39:1 aspect ratio, but you can also use it for films in 1.85:1. In most cases, Super 35 gives your framing three perforations as opposed to the full four, most prominently for 2.39 films.

EXAMPLE PART NUMBER: BS 8 - S - M (Bearing Style) - Max Stroke - EB2 BS 6 S D Bearing Style MAX Stroke End Block x 2 Basic Slide 6mm Shaft Hard Chrome Plated Steel Single Block Double Block M = Minuteman PTFE Composite B = Linear Ball Bearing Distance the carriage plate has to travel EB2 NOTE: Shaft Length = Width of End Blocks x 2 + Carriage Block Length + MAX Stroke Basic Slides come in kit form. Given the length of travel you desire, LM76 will cut shafting to accommodate your application. Thus you need to specify the amount of system travel you need to end up with. Bearing Options - See Difference between Linear Ball and PTFE Composite B = Steel Jacketed Linear Ball Bearing M = Minuteman PTFE Composite - Self Lube LM76 will cut shafting to accommodate your stroke requirements P/N Load N Load lbs. BS6-S 44.5 10 BS6-D 89 20 BS8-S 47 10.5 BS8-D 95 21 BS12-S 110 24.5 BS12-D 127 28.5 NOTE: The BS 6 Slide is not available with the "M" ( PTFE ) Style Bearing.

Originally produced during the Great Depression of the Pre-Code 1930s, 8mm film was created for amateur filmmakers to easily pick up and use. It features one perforation per frame, and can even use just one on the left as opposed to having one on each side.

Just so you know, there have been a variety of film gauges in photography, but we don’t want to make your head spin, which is why we will be covering the most popular and well-known film gauges still in use today.

Darren Aronofsky has used this film gauge a lot, which adds to his distinctive directing style. These 16mm shot films includ his first, Pi (1998), as well The Wrestler (2008), Black Swan (2010), and mother! (2017).

The Royal Ocean Film Society has a humorous but informative video that explains the appeal of 16mm, while also talking about why it’s still used and what effect that has on the film and its audience.

Before (and even after) 8mm, there was 16mm, which has two perforations on each side of the frame. While also targeted towards amateur filmmakers in the 1920s, it was used for lower-budget productions, ranging from educational films, commercials, and television programs.

Basic Slides come in kit form. Given the length of travel you desire, LM76 will cut shafting to accommodate your application. Thus you need to specify the amount of system travel you need to end up with. Bearing Options - See Difference between Linear Ball and PTFE Composite B = Steel Jacketed Linear Ball Bearing M = Minuteman PTFE Composite - Self Lube LM76 will cut shafting to accommodate your stroke requirements P/N Load N Load lbs. BS6-S 44.5 10 BS6-D 89 20 BS8-S 47 10.5 BS8-D 95 21 BS12-S 110 24.5 BS12-D 127 28.5 NOTE: The BS 6 Slide is not available with the "M" ( PTFE ) Style Bearing.

Some interesting techniques with 35mm kept happening, like Techniscope, which used two perforations in order to shoot films with a wider 2.39:1 ratio without anamorphic lenses (at the risk of extremely grainy footage).

LinearBearing Block

The widescreen revolution of the 1950s resulted in many studios cropping standard 35mm film from 1.37 to 1.66:1, 1.85, or 2:1. This style of having a native 1.37 ratio and cropping, either during or in post-production, is still in use today, extending to the new world of digital.

Before we go any further into the weeds of this subject, let us provide you with a comprehensive and helpful video courtesy of Fandor. The video below covers the generals of film gauges and why they matter for a film’s look and mood.

Linear slide bearingscatalogue

Basic linear slides are just that...basic. They are easy to understand, install and get the job done. Basic Slides come in 3 sizes and offer two, carriage sizes: single ( 2 bearings ) and double ( 4 bearings ). The end support blocks offer a simple clamping and mounting design in one. Lastly, you have 2 bearing packages: steel linear ball bearings or our Minuteman PTFE Composite, Self Lube linear bearings. Basic slides offer some special options: Lightweight ceramic coated aluminum shafting (only when used with Minuteman PTFE Composite Bearings) FDA/USDA/Washdown Compliant Ceramic Coated Aluminum Carriage Plate, Shafting, End Support Blocks and Minuteman White PTFE Composite Bearings Please call for additional information on these options: 1-800-513-3163

Linear bearings

Like 8mm, 16mm had a popular variation in Super 16; it takes up more of that exposed area to produce a better quality image. While standard 16mm has a native aspect ratio of 1.37:1, Super 16 managed to go widescreen with 1.66:1 (which can be easily cropped to 1.85:1).

There have been a few variations on 8mm film, but the most popular and well known is Super 8. Created in the mid-1960s, it uses more of the exposed area on the strip, meaning greater quality of film.

Heavy dutyLinear Sliderails

While traditional 70mm film gauges are still used, these days the most common type of 65mm filmmaking comes from IMAX. Taking a cue from VistaVision, IMAX movies are shot horizontally with fifteen(!) perforations on the top and bottom of the film strip. Needless to say, there are no bigger film gauges than IMAX, which is why the clarity and sound of IMAX pictures are second to none.

When shooting a motion picture on physical celluloid, there are different types you can choose from. Each type will be a certain width, which contributes to its quality, size, grain count, and more. When identifying the different types of celluloid used in filmmaking, we refer to these strips by their film gauge, which is often, but not always, recognized by how many perforations it has. But what is film gauge, why does it matter, how else can it be identified, and which one should you choose?

Wes Anderson also used Super 16 for his film Moonrise Kingdom (2012), which gave the period piece a distinctive look unique in Anderson’s filmography. The film was also shot in 1.85:1, a ratio Anderson is not very known for. More recently, Jonah Hill’s directorial debut, Mid90s (2018), was shot on standard 16mm and presented in 1.33:1.

LinearGuide Rail

While most film studios in the 1950s and ‘60s were making things happen with 35mm, a few select companies were working with 65mm, better known as 70mm. A format twice as large as 35mm, the amount of perforations are usually five per frame side.

As cool as it was, VistaVision was not meant to last, as Paramount abandoned it after a few years. Check out this video on the restoration of Richard III, shot in VistaVision and directed by its star, Laurence Olivier.

A visual medium requires visual methods. Master the art of visual storytelling with our FREE video series on directing and filmmaking techniques.

Linearguide Rail Canada

LinearBearing Rail

Even when 20th Century Fox licensed the use of the anamorphic widescreen technique to create CinemaScope, 35mm film was still being used in a creative way. Panavision would later eclipse CinemaScope, being the primary and favorite of filmmakers for decades for filmmaking with anamorphic lenses.

35mm helped standardize the Academy ratio, which made sure all major motion pictures were in the 1.37:1 aspect ratio (which is the native ratio of standard 35mm film gauges for making movies).

As a result, it became fairly well known and used among amateurs, especially since it could provide color images. This also fueled its usage for serious productions on TV, getting a lot of use out of British stations and various industries.

In the video below, writer/director David Lowery explains in brief detail why he decided to use Super 16 for his film The Old Man and the Gun (2018), which gives off a dirty but warm feel reminiscent of how films looked in the time period the film is set in.

As a lower quality film gauge, it tends to produce a very soft image. This also appears very grainy and maybe even dirty. In general, 8mm filmmaking was meant for filming your family during a cookout more than a lavish full production. But that’s also why it was marketed to amateurs: it was cheaper than the higher quality 16mm format (which we’ll get to soon).

Now that you know about the most prominent film gauges in filmmaking, it might do you some good to learn more about aspect ratios. We cover the most basic ratios you’re bound to see and use, along with how they are used and what effect they give off in the films they appear in.

Bearing Options - See Difference between Linear Ball and PTFE Composite B = Steel Jacketed Linear Ball Bearing M = Minuteman PTFE Composite - Self Lube LM76 will cut shafting to accommodate your stroke requirements P/N Load N Load lbs. BS6-S 44.5 10 BS6-D 89 20 BS8-S 47 10.5 BS8-D 95 21 BS12-S 110 24.5 BS12-D 127 28.5 NOTE: The BS 6 Slide is not available with the "M" ( PTFE ) Style Bearing.

Probably the most important feature of Super 8 is that it provided its film in a cartridge, which used a loading system. So, not only was Super 8 a better way to shoot in 8mm, but inserting and replacing the film itself was also tremendously easier.

Rafael Abreu received his M.A. in Cinema Studies from New York University. He’s written reviews, scripts, and analytical essays focusing on all aspects of cinema. He can’t stop talking about aspect ratios.