First Contact polymer solution can be poured, sprayed or brushed on an optic. Nothing touches the optic surface except the liquid polymer solution. When properly applied, it is impossible to scratch the optic's surface, regardless of the contaminants present.

216diffusion

First Contact™ red polymer cleaning kits for optics use a polymer to safely clean an optic to unprecedented levels. The polymer solution conforms to surface contours, encapsulates foreign particulates, and dissolves organic contaminants as it drys to a robust film. Peeling off the red polymer film reveals a pristinely clean surface no mater how contaminated the optic was before cleaning.

A magnifying glass produces an upright, magnified virtual image. The virtual image produced is on the same side of the lens as the object. For a ...

Soild Apollo’s Round opal diffuser is designed to easily mount in all Round Aluminum Profiles. The opal design precisely controls the light output while also protecting the LED light strip from the elements.

Opal diffusionprice

A 3mm hex key is required for many Cassin products like X-Trigger, X-WGT (head weight) and Blade Runner Front point. It's also a standard size for many ...

Our brush applicator polymer cleaning kits include a nail polish style brush applicator bottle, polymer refill bottles, peel tabs and a carrying case. The red polymer can be poured or brushed on the optic. After allowing the polymer to dry to a thin film, a peel tab is applied to remove the film from the optic. Our standard RFCR optic cleaning kit includes 73 ml of designer red polymer solution and 30 pull tabs. Our deluxe RFCD optic cleaning kit includes everything in the standard cleaning kit plus 2 additional 29 ml polymer solution refill bottles and 20 additional peel tabs.

Opal diffusionvs frost

The motorized security shutters secure residential access points, including doorways, garages, and wide entryways. You can roll up the shutters to enjoy ...

How to open task manager and Magnifier with shortcuts #digitcomputeracademy #shortcutkeys #LearnWithUs #shortcuts #careergrowth #digitalmarketing #keyboard ...

Our polymer cleaner can be used to protect a coated optic's surface. Once dried, the inert polymer forms a strong and flexible covering that adheres intimately to the surface. The polymer film prevents airborne contaminants from settling on the optic. It also protects the optic from damage from fingerprints, particulate and abrasion. The dried polymer film provides an excellent barrier to oxygen, sulfur, and water vapor. It can be used during shipping or storage to prevent oxidation and chemical damage.

Opal diffusionlee filters

Yes, opt-in.  By checking this box, you agree to receive our newsletters, announcements, surveys and marketing offers in accordance with our privacy policy

First Contact polymer solution can be poured, sprayed or brushed on an optic. Nothing touches the optic surface except the liquid polymer solution. When properly applied, it is impossible to scratch the optic's surface, regardless of the contaminants present.

Choose products to compare anywhere you see 'Add to Compare' or 'Compare' options displayed. Compare All Close

4'x4opal diffusion

First Contact™ red polymer cleaning kits for optics use a polymer to safely clean an optic to unprecedented levels. The polymer solution conforms to surface contours, encapsulates foreign particulates, and dissolves organic contaminants as it drys to a robust film. Peeling off the red polymer film reveals a pristinely clean surface no mater how contaminated the optic was before cleaning.

216 vs 250diffusion

Our polymer optic cleaning kits are a cost effective tool for cleaning laser optics. You can apply the polymer, let it dry, and remove it when you want to use the optic. The polymer film will protect the optic while keeping it perfectly clean until peeled off. This allows you to clean optics on your own schedule, and not just before use. It is also possible to clean a mounted optic.

That's where the magnifying glass comes in. A magnifier with a 2X power, for example, enlarges an object and lets us see it as though it were two times closer ...

Magnifying Glass. Close up of a ladybug. Filters. Brand. Explore One (1) · National Geographic (4). Availability. In stock (3) · Out of stock (2). Price.

The coverage you can expect depends on the shape, size and roughness of the optic. One milliliter of red polymer solution can clean about 6 flat and smooth 1-inch optics. A bit more is required if the surface is rough or for larger optics. There is no maximum or minimum size of optic that can be cleaned. First Contact red polymer has been used to clean the surface of fiber optics as well as 6-foot hexagonal mirrors used in telescopes.

OpalDiffuser sheet

20201118 — Eyepiece (ocular lens) with or without Pointer: The part that is looked through at the top of the compound microscope. Eyepieces typically have ...

The wavelength and the frequency are related by the speed of sound; high frequency implies short wavelength and low frequency implies a long wavelength. The ...

OpalFrostdiffusion

Our brush applicator polymer cleaning kits include a nail polish style brush applicator bottle, polymer refill bottles, peel tabs and a carrying case. The red polymer can be poured or brushed on the optic. After allowing the polymer to dry to a thin film, a peel tab is applied to remove the film from the optic. Our standard RFCR optic cleaning kit includes 73 ml of designer red polymer solution and 30 pull tabs. Our deluxe RFCD optic cleaning kit includes everything in the standard cleaning kit plus 2 additional 29 ml polymer solution refill bottles and 20 additional peel tabs.

Right-hand circularly polarized light is defined such that the electric field is rotating clockwise as seen by an observer towards whom the wave is moving. Left ...

Brackets, Braces and Plates. For solid and straight assembly ... Short Corner Brace. 2 products. See All Options ...

First Contact red polymer was developed over several years using designer polymers and a complex solvent system. The polymer solution adheres strongly to itself and particulate contaminants but has very minimal adhesion to the surface of an optic. The polymer dries to a red flexible film that can be peeled off easily, revealing a pristine optic surface. The polymer has been carefully developed to work with high quality lenses, mirrors and diffraction gratings. It is designed to dry at a controlled rate to avoid thermal coating stress that could damage an optic. First Contact red polymer optic cleaner is safe for use with optical glass, metals, Si, Ge, KBr. KRS-5, ZnSe and NaCl, as well as thin films like AR and reflective coatings. It can be used on smooth or rough surfaces, flat or curved surfaces, and continuous or non-continuous surfaces. The fluid polymer conforms easily to the optic's surface, while the dried film releases from the optic with a simple peel.

The coverage you can expect depends on the shape, size and roughness of the optic. One milliliter of red polymer solution can clean about 6 flat and smooth 1-inch optics. A bit more is required if the surface is rough or for larger optics. There is no maximum or minimum size of optic that can be cleaned. First Contact red polymer has been used to clean the surface of fiber optics as well as 6-foot hexagonal mirrors used in telescopes.

Durable Plastic Design The plastic construction protects the LED light strip from moisture and unwanted handling. The design is durable and can withstand a variety of elements.

First Contact red polymer was developed over several years using designer polymers and a complex solvent system. The polymer solution adheres strongly to itself and particulate contaminants but has very minimal adhesion to the surface of an optic. The polymer dries to a red flexible film that can be peeled off easily, revealing a pristine optic surface. The polymer has been carefully developed to work with high quality lenses, mirrors and diffraction gratings. It is designed to dry at a controlled rate to avoid thermal coating stress that could damage an optic. First Contact red polymer optic cleaner is safe for use with optical glass, metals, Si, Ge, KBr. KRS-5, ZnSe and NaCl, as well as thin films like AR and reflective coatings. It can be used on smooth or rough surfaces, flat or curved surfaces, and continuous or non-continuous surfaces. The fluid polymer conforms easily to the optic's surface, while the dried film releases from the optic with a simple peel.