Borosilicateglass

Crown glasses are optical glasses with low chromatic aberration (Abbe number above 55 or 50) which tend to have low refractive index.[11] Many optical components such as lenses, mirror substrates, optical windows, and prisms are made from crown glasses. They are particularly useful for imaging applications as they minimize chromatic aberrations.[11]

Online Monitoring System In addition to layer thickness control through oscillating crystals and monochromatic optical detection, LASER COMPONENTS also has an optical broadband monitoring system available. During the coating process, the entire visible spectrum is monitored and the layer thickness precision increased to over 0.1%. This makes the production of complex coating systems significantly easier. In conjunction with the low drift layers of the IAD coating process, this monitoring system can expand the product spectrum and significantly increase the reliability of the coating process. With its help we are able to coat high power laser optics in such a compact way that the water virtually has no chance of embedding itself. With process temperatures of less than 100°C it is also possible to equip fully assembled fibers, plastic lenses, and glued and assembled optics with a hard, laser-proof coating.

ZEISS glasses

In the late 1800s, German physicist Ernst Abbe, a colleague of Carl Zeiss, created the Abbe number, a measure of the magnitude of chromatic dispersion for the visible spectrum.[9] Also known as the V-number, the Abbe number combines the refractive indices of a material at three wavelengths (486.1 nm blue from hydrogen, 589.2 nm yellow from sodium, and 656.3 nm red from hydrogen) to approximate the amount of chromatic aberration a material will have when visible light passes through it (Figure 3).[8] The Abbe number is inversely related to the amount of chromatic aberration. A high Abbe number indicates low chromatic aberration, and a low Abbe number indicates high chromatic aberration.

Sep 2, 2021 — The objective collects light from the sample and typically has a magnification of 40-100 x. Some compound microscopes feature multiple objective ...

Opticalframe brand

In order to protect the eyes from this radiation, lenses with ultraviolet-absorbing capabilities can be used. Intraocular lens implants, for instance, have chromophores that absorb ultraviolet light. Nearly all dark sunglasses absorb most incident ultraviolet light. Certain coated clear-glass lenses and clear plastic lenses made of CR-39 or polycarbonate also have strong ultraviolet-absorbing capabilities.[16]

All content on Eyewiki is protected by copyright law and the Terms of Service. This content may not be reproduced, copied, or put into any artificial intelligence program, including large language and generative AI models, without permission from the Academy.

This compound lens can be optimized at a distance of either two wavelengths (achromatic lens), three wavelengths (apochromatic lens), or four wavelengths (superachromatic lens).[14] This point of optimization where chromatic aberration is minimized is called the circle of least confusion.[15] The achromatic lens is the most commonly used commercial lens, referred to as a doublet, and can drastically reduce the chromatic focal shift.[13]

An optical flat is a piece of glass, pyrex, or quartz having one or both surfaces carefully ground and polished plano, generally flat to less than a tenth of a ...

Plastic lenses gained popularity in the 1970s and have the benefits of weighing half as much as glass lenses due to their lower specific gravity and having high optical quality.[17] CR-39 which stands for Columbia resin #39 is the most commonly used plastic polymer lens material. The lenses block 80% of ultraviolet light without treatment, and can be tinted and coated to provide further ultraviolet light blocking. Plastic lenses tend to have a lower index of refraction, which require thicker lenses. The lens surface is also softer and thus easier to scratch, however scratch-resistant coatings are available to create a harder surface. CR-39 lenses in particular do not have the shatter resistance of polycarbonate or Trivex, increasing risk to wearers.[16]

Stainedglass

The Abbe diagram is created to compare various glass types based on Abbe number and refractive index for a certain wavelength.[1] As demonstrated in Figure 4, there is a general trend of increased dispersion (a lower Abbe number) in high-index glasses.[10] Using the Abbe diagram, glasses are generally categorized as crown glass (last letter “K”) or flint glass (last letter “F”) based on their Abbe number.[1]

IAD Sources Depending on coating requirements, two different IAD sources are available at LASER COMPONENTS: An ECR source (electron cyclotron resonance) predominantly delivers ions in the range of under 100 eV. Because of the relatively (to the cold cathode sources) low ion energy, the coatings produced with this source have a low remaining porosity. This allows high damage thresholds to be achieved, particularly in the nansosecond range. Alternatively, a cold cathode source is available that provides energy in the range of up to 200 eV, through which extremely compact layers can be produced that completely avoid water retention. Layers of this kind are characterized by just a marginal thermal drift.

This is a great lens for those looking for a nice balance lift in target orange and pink. This lens has been improved to provide additional glare reduction ...

High index polycarbonate lenses were popularized in the 1980s due to light weight, thin profile, superior impact resistance, and ultraviolet protection. These lenses are often recommended for children, young adults, individuals with active lifestyles, and as safety eyewear. They are very durable and can be up to 30% thinner than regular glass or plastic lenses.[17] Disadvantages include high chromatic aberration indicated by its low Abbe number, which results in color fringing most noticeable in strong prescriptions. Additionally, polycarbonate is the most easily scratched plastic, thus requiring a scratch-resistant coating.[16]

Features With this process it is possible to produce cw/fs coatings in addition to various high-power coatings. This is achieved through the deposition of different materials. The coating modifications can affect the bandwidth, dispersion behavior, scatter losses, and damage threshold.

Our first in-house production facility was a coating machine for hard dielectric coatings which was put into operation in 1986. Soon the name LASER COMPONENTS was ranked among the top suppliers of laser optics. Many large laser technology manufacturers count on our optics, which cover the complete spectral range from 248 nm (UV) to 3.0 µm (MIR). Our specialties include the manufacture of glass parabolic mirrors for thin disk lasers, adaptive optics, and Gaussian mirrors.

Sputter Coating Process In the sputtering method, noble gas ions are shot at the coating material. The impact of the ions disperses the material, which subsequently settles on the substrate to be coated. Due to their extremely high kinetic energy the impacting particles are very mobile. This mobility aids in the filling of holes and the avoidance of any defects in the growing layer. This ultimately leads to the formation of exceedingly smooth layers which are particularly homogeneous in their optical properties. Using this coating method several hundred layers may be placed on top of each other, creating optical coatings for selected requirements.

This interface card is standard on all AR automated units. It provides USB or RS-232 instrument control. USB cable does not come standard. SKU# 39063.

Trivex was introduced in 2001 and is a highly impact-resistant material with a low specific gravity delivering strong optical quality and minimal chromatic aberration indicated by its high Abbe number. Trivex is also able to block nearly all ultraviolet light. A disadvantage of Trivex lenses is its low index of refraction, thus requiring thicker lenses for higher powers. At the ±3.00 Diopter prescription range, this material allows for a comparably thin lens. Trivex is the lightest material available and meets high-velocity impact standards. A scratch-resistant coating is required for this lens.[16]

Analytically, the focal length is described by the lens maker's equation: 1/f = (n - 1)(1/R1 + 1/R2), where R1 and R2 are the radii of curvature, f is the focal ...

Top Rated · Logitech C920x Pro HD Webcam - Black · Logitech ConferenceCam Connect 960-001013 Video Conferencing Camera · Logitech C920S Pro HD 1080p Webcam (960 ...

Flint glasses are optical glasses with high chromatic aberration (Abbe number below 50) which tend to have a high refractive index (typically greater than 1.55).[12] Corrective glass lenses are often made from flint glass as the higher refractive index allows for a lighter weight. Dispersive prisms are also often constructed from flint glass to achieve a high angular dispersion.[12]

ZEISS lenses

For applications which use high levels of power and require a low wavelength drift, high mechanical resilience, or low dispersion layers, we recommend applying the IAD process (ion-assisted deposition). Moreover, IAD coating has the advantage that it can be performed at low temperatures, which makes it possible for sensitive substrates or optical fibers to be coated.

Chromatic aberration can be corrected by combining the crown and flint glass elements to make a compound lens. This is achieved by apposing the two lenses and shaping them so that the chromatic aberration of one is neutralized by the other. The ultimate goal is to reduce the chromatic focal shift—the distance between focal points of dispersed wavelengths by a lens—between different wavelengths on the visible spectrum.[13]

Specific gravity is a ratio of a material’s density to the density of water at 4 degrees Celsius. Density and specific gravity can both compare substances in terms to the amount of mass per unit volume. Density is simply mass per unit volume, however specific gravity is a ratio and thus has no units. A lens with a low specific gravity means that an identically sized lens of a high specific gravity would be heavier. This property is relevant in designing lenses as a lighter lens is preferable for eyeglass wearers.[16]

The human eye does not perceive ultraviolet radiation, however the effects of ultraviolet exposure can be harmful to the eye. Transmission of ultraviolet radiation through ophthalmic lenses may be reduced or blocked depending on the lens material.[17]

Top LIDT Comparative measurements by various renowned institutes and laser manufacturers prove that thanks to our optimized manufacturing processes, we achieve the highest possible laser induced damage thresholds (LIDT). Technologies In our custom-made high-vacuum chambers with their electron beam guns, we coat substrates supplied with diameters ranging from 4 to 390 mm. The department currently uses six coaters – including two with ion beam sputtering technology, which allows us to manufacture the dense layers required for next-generation lasers.

I'm yet to understand the science behind how as an entrepreneur, I get more business calls and sales when I'm outside compared to when I work from home. I might ...

Glass had been the material most widely used for ocular lenses until the 1970s. Glass provides superior optical quality and has the most scratch-resistance surface, however it has several limitations including heavy weight, increased thickness, and low impact resistance. Glass lenses must be treated to comply with the American National Standards Institute impact resistance standards.[17] Chemical or thermal tempering can increase the shatter resistance, however this effect is lost if the lens is scratched or worked on with any tool after tempering. Individuals with myopia who desire thin glasses may opt for high-index glass, however the highest-index glass lenses cannot be tempered and require patients to sign a waiver accepting the risk of breakage. Additionally, high-index glass does not block ultraviolet light without a coating.[16]

To limit thermal gradients when heating viewports, we recommend the viewing area and the flange be covered with many layers of aluminum foil to act as a ...

Ultraviolet light can be broadly categorized into UVA (400-320 nm), UVB (320-290 nm), and UVC (290 nm to 10 nm). Ultraviolet light makes up 5% of all solar radiation falling on the Earth; among the 5%, 90% is composed of UVA and 10% of UVB. Nearly all UVC is absorbed by the ozone layer of the atmosphere. UVC exposure typically occurs from manufactured resources. Ultraviolet light can cause damage to tissue by disrupting molecular bonds and incapacitating their function. These molecules can also be damaged by action of free radicals produced as a byproduct of ultraviolet light in the presence of oxygen and a photosensitizing pigment.[16]

Corrective spherocylindrical lenses are commonly used to treat refractive errors such as myopia, hyperopia, presbyopia, and astigmatism. Both lenses and prisms are also frequently used to improve eye alignment and treat diplopia in strabismus. Eyeglasses also serve an important role in protecting the eyes from physical trauma and harmful radiation. Lenses can be produced using a variety of materials and designed with several optical profiles to optimize use in specific applications. Critical lens properties include refractive index, Abbe number (chromatic dispersion), specific gravity, and ultraviolet absorption.[1]

The E-beam process, also referred to as the PVD process (Physical Vapour Deposition), is the most commonly used coating technology in the field of laser technology. Due to their fast layer growth and flexible capacity, coatings can be produced with high damage thresholds at reasonable prices.

A common misperception is that lens materials with a higher index of refraction have a higher physical density (mass over volume). In reality, it is not the physical density but rather the optical density of the material that determines the speed of a light wave through a medium. The optical density, or absorbance, of a material is a logarithmic ratio of light intensity entering versus exiting a particular material. The change in intensity is due to the tendency of atoms to dissipate some of the energy through vibration as light passes through it.[3]

Refraction is defined as the change in direction of a wave of light as it passes from one medium to another.[2] The amount that the light changes direction depends on the indices of refraction of each medium, and is described quantitatively by Snell's law (Equation 1). The index of refraction of a material describes how fast light travels through a material and is defined by the speed of light in a vacuum (3 x 108 meters per second) divided by the speed of a given wavelength of light in the medium (Equation 2).[2] The indices of refraction of a few materials and lenses are listed in Figure 1.

Welcome to LASER COMPONENTS USA, Inc., your expert for photonics components. Each product in our wide range of detectors, laser diodes, laser modules, optics, and more is worth every Dollar ($/USD). Our customized solutions cover all conceivable areas of application: from sensor technology to medical technology. You can reach us here:

Ion beam sputtering (IBS) is an extremely precise and reproducible coating method. Unlike in any other coating technology, process parameters, such as application of energy, layer growth rate, and oxidation level, can be independently and exactly regulated. This leads to compact layers with the lowest possible wavelength drift.

Chromatic dispersion, also referred to as chromatic aberration, is a phenomenon where the speed and direction of light propagation in an optical medium depends on the wavelength of light. The interaction of the particular wavelength of light with electrons in the medium gives rise to this phenomenon.[5] When a single beam composed of multiple wavelengths of light passes through a lens, each wavelength of light will change direction and speed to different extents. As a result, the index of refraction for a given medium will vary based on the wavelength of light going through it.[6] In Figure 2, a single lens demonstrates chromatic aberration as different wavelengths of light have different focal lengths after passing through the lens.[4] Each wavelength of light will thus be focused at a different distance away from the lens. This can be visualized on images at bright to dark boundaries as “fringes” of color.[6][7]

High-index materials are defined by a refractive index of 1.60 or higher, and can be either glass or plastic. The main utility of high-index lenses is for high-power prescriptions to create thin and cosmetically attractive lenses.[16] The weight, optical quality, and impact resistance of high-index lenses vary based on the material used. For high-index glass, the specific gravity tends to run high, which means that these lenses are often heavy compared to other materials. None of the high-index materials pass the American National Standards Institute’s impact resistance standards.[16]

Crownglass

2: From the wavelength of the He-Ne laser line, λ = 6.328 x 10-7 m, calculate its frequency. Thus we get a band of frequencies eligible to participate in ...

Browse Encyclopedia ... Focal length is the optical distance in millimeters between a camera lens and the sensor or film. It determines the height and width of ...