The XM Series’ compact housing and design make it less susceptible to temperature and humidity, allowing for installation anywhere without a measuring room. Installation also doesn’t require any vibration-resistant construction, compressors, or other auxiliary equipment conventionally required when constructing a measuring room. Parallelism is also not required, making it possible to perform measurement simply by placing the machine on a tabletop.

Ultra Light OpticsBattery

Put the stylus on four or more points for point measurement of flatness. Increasing the number of measurement points enables precise, stable measurement even for wide measurement ranges.

Ultra light opticsreviews

The XM Series is a handheld coordinate measuring machine (CMM) that lets anyone easily measure 3D/GD&T features. The system is portable and shop-floor ready, so measureme...

Place the target on the precision plane table and secure it in place. Set the dial gauge so that its measuring part comes into contact with the measurement surface. Move the target so that the measurement surface is evenly measured, and read the dial gauge values. The largest deviation value is the flatness.

Ultra Light Opticstroubleshooting

Ultra Light OpticsOmega Cordless Hybrid

When measuring flatness, you are checking for unevenness in the surface, to see how precisely flat a surface is. The most protruding part and the most concaved part must be at a specific distance between two planes that are separated vertically.

The measured values may change depending on any changes in the measurement points, since the measurement points change depending on how you move the target. Therefore, it is difficult to obtain stable measured values.

The WM Series Coordinate Measuring Machine is a new handheld CMM designed accurate 3D and GD&T measurements over a large 15m (49 ft) area. Similar to the XM Series, the u...

Ultra light opticsloupes

KEYENCE’s XM Series Handheld Probe Coordinate Measuring Machine was created to allow anyone to perform accurate 3D measurements easily.

・Difficult to operate Coordinate measuring machines require specialized knowledge to operate, so they take time to master. And since only a limited number of people can operate them, they cannot always be used immediately when needed.

・Space and Metrology lab required Coordinate measuring machines are extremely large, so they require a large amount of space for installation. And the room temperature must be kept at 20°C (68°F) at all times, and countermeasures against vibrations are essential. For companies that do not already have a metrology lab, constructing one is not a simple undertaking

Ultra light OpticsFace Shield

Simply place the probe against the part according to the on-screen guidance on the monitor.Unlike conventional coordinate measuring machines, the XM Series requires no specialized knowledge.This allows anyone to perform 3D measurements easily immediately after installation.

The XM Series comes standard with a function for automatically creating inspection reports and work procedures that include camera images. Measurement points and items are laid out automatically, resulting in significant reductions in inspection report and operating instruction preparation time.

The XM Series’ handheld probe provides a high degree of flexibility, allowing for easy measurement of any target, regardless of shape.Anyone can measure a feature the same way it was originally measured simply by placing the probe against the location on the part displayed on the screen.

The above batteries will have different model numbers on the product pages since they are after market replacement batteries which are as good or better than the originals.  The current or mAh (milliamp hour) rating of a battery is an indication of the battery capacity or how long it will last on a charge, the higher the better.

The XM Series utilizes an ultra-robust camera that has been developed to minimize measurement errors caused by temperature changes. This has dramatically improved the flexibility of installation in various environments, reducing the time lost waiting for measurement at worksites and improving work efficiency.