Vista professional outdoor Lighting

FX Luminaire's latest game-changing innovation in LED lighting is the Luxor lighting controller featuring zoning and dimming capabilities and a full color digital interface. Look for it at upcoming trade shows where FX is featured.

After removal, an additional laser output, having less than 0.1% of incident beam power will be reflected. That beam could be used for simultaneous measurement of laser power via Ophir Power Meter in addition to beam profiler.

The beam blocker is designated to keep one wedge surface protected during handling and shipping. It can be left attached for low power laser operations. However, in the case of high-power laser irradiation scattered light might interfere with beam profile measurement and cause offset. In case of such offset, we recommend removing the beam blocker.

With Luxor controlling an LED landscape lighting system, lights don’t simply turn on and off, they come alive. Luxor offers both zoning and dimming capabilities that allow for virtually limitless design possibilities. Zoning allows lights to be programmed into preset groups, which can be activated for special occasions such as parties, or activities such as barbequing. Dimming allows lights to automatically emit any desired illumination percentage anytime, anywhere within a system. So, group A can be set to 100% illumination at 7:00 p.m., and automatically shift to 60% at 9:00 p.m., and so on.

For the most versatile and easy-to-use zoning and dimming control system ever created, Luxor is the clear choice for the professional designer, and the most discerning clients.

Regular laser safety precautions should apply. Please note, that the main incident beam will exit the LBS-400 refracted approximately 6°. Provision must be made to safely contain the transmitted beam by beam dump or power meter.

Yes, the main function of LBS-400 beam splitter is Beam profiling, however, it performs a 3-way beam splitting:Less than 0.01% (1/103) of the beam is reflected in one direction and less than 1% in another while the remaining 99% of the incident laser beam is transmitted.This allows user to measure one of the 3 beams, depending on available power measurement equipment and setup convenience.

The LBS-400 beam sampler attachment for cameras allows you to measure UV or IR wavelength laser beams with diameters up to 1 in. and powers ranging from 10 mW to ~500W(1). The beam sampler is designed so that the preferential polarization selection effect of a single wedge is canceled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam.

What makes Luxor the most advanced lighting control solution available is its proprietary ZD Technology. This highly advanced technology allows the controller to “talk” to the LED lights and alerts them to adjust their illumination based on events scheduled in the controller. With the capacity to schedule virtually limitless events, the options for the designer are all but endless.

The beam sampler operates by reflecting the incoming beam from the front surfaces of a pair of wedges through 90 degrees into the camera. Approximately 99% of the beam is transmitted through each beam sampler with 0.01% passed on to the camera. A set of adjustable filters are provided to make final intensity adjustments to the beam before it reaches the camera imager.

After removal, an additional laser output, having less than 0.1% of incident beam power will be reflected. That beam could be used for simultaneous measurement of laser power via Ophir Power Meter in addition to beam profiler.

Yes, opt-in.  By checking this box, you agree to receive our newsletters, announcements, surveys and marketing offers in accordance with our privacy policy

The LBS-400 beam sampler attachment for cameras allows you to measure UV or IR wavelength laser beams with diameters up to 1 in. and powers ranging from 10 mW to ~500W(1). The beam sampler is designed so that the preferential polarization selection effect of a single wedge is canceled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam. (1) For Gaussian beam diameter <1/2 the clear aperture and depending on ND filter and camera saturation limits the maximum power may be as high as 1200W.

©2024 Hunter Industries Inc. Hunter, the Hunter logo, and other marks are trademarks of Hunter Industries Inc., registered in the U.S. and certain other countries. | Privacy Policy |

Regular laser safety precautions should apply. Please note, that the main incident beam will exit the LBS-400 refracted approximately 6°. Provision must be made to safely contain the transmitted beam by beam dump or power meter.

FxLuminaire

The beam blocker is designated to keep one wedge surface protected during handling and shipping. It can be left attached for low power laser operations. However, in the case of high-power laser irradiation scattered light might interfere with beam profile measurement and cause offset. In case of such offset, we recommend removing the beam blocker.

Choose products to compare anywhere you see 'Add to Compare' or 'Compare' options displayed. Compare All Close

In order to provide better service and products, please provide the following brief information. Any future resource requests will be automatically available.

Unique Lighting

The beam sampler operates by reflecting the incoming beam from the front surfaces of a pair of wedges through 90 degrees into the camera. Approximately 99% of the beam is transmitted through each beam sampler with 0.01% passed on to the camera. A set of adjustable filters are provided to make final intensity adjustments to the beam before it reaches the camera imager.

(1) For Gaussian beam diameter <1/2 the clear aperture and depending on ND filter and camera saturation limits the maximum power may be as high as 1200W.

Yes, the main function of LBS-400 beam splitter is Beam profiling, however, it performs a 3-way beam splitting:Less than 0.01% (1/103) of the beam is reflected in one direction and less than 1% in another while the remaining 99% of the incident laser beam is transmitted.This allows user to measure one of the 3 beams, depending on available power measurement equipment and setup convenience.