An exclusive Honda rotary-slinger lubrication system keeps oil in a completely misted state and circulates it using pressure fluctuations generated by the movement of the piston.

The system consists of an oil level sensor inside the crankcase.  When the oil reaches a level that is too low for safe operation, the engine warns you or stops automatically.

Greenception GC-Pure 80W

WARNING: This product can expose you to chemicals including soots, tars, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm.

New V-shaped valves and a pent-roof combustion chamber enable air in cylinder to flow more smoothly and maximizes the mixing of fuel. The longer stroke design also enhances turbulence in the cylinder, helping the mixture of air and fuel.

GreenceptionGC

Honda iGX engines feature an integrated ECU (electronic control unit) with a self-tuning regulator (STR) governor system.

The idea of integrating the cylinder & head into one unit is radical. Radically smart. It eliminates the head gasket, head bolts, and allows for more airflow and better cooling.

Sep 20, 2023 — The FOV of an eyepiece is calculated using the formula: FOV = (Eyepiece field stop / Eyepiece focal length) x 57.3. The eyepiece field stop is ...

The lubrication system uses a high capacity pump with discrete chambers.  This facilitates consistent oil delivery.

The new integrated Fuel-Off position on the engine control allows the user to stop the flow of fuel to the engine when pressure washing is complete.

Small engine timing belts are usually external and are subject to wear caused by dirt.  Honda’s internal timing belt runs in oil, eliminating the need for conventional drive gears.

Honda Cycloflow™ technology enhances the air-fuel mixture and makes it easier to start the engine and idle smoothly while making it more resilient to poor quality fuel.

GreenceptionGC4

SAE J1939 CAN Bus (Controller Area Network) communication functionality provides ECU (Electronic Control Unit) connectivity with less wiring. It enables a variety of complicated electronic controls to be linked to improve operability.

Specifically designed for home-use power equipment applications, the GC160 provides an ideal source of power for a variety of consumer products.

The power is transmitted through forged-steel connecting rods and a forged-steel crankshaft, supported by a full-pressure lubrication system.

Cut Tape Fiber Optics are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for Cut Tape Fiber Optics.

How does it work - With the engine running and the switch placed in the Fuel-Off position, the fuel flow to the carburetor is stopped. The engine will continue to run until the majority of fuel remaining in the carburetor is consumed and the engine shuts down.

Moreover, the 10x optical zoom lens has a variable focal length that allows users to adjust the zoom level, providing flexibility in composition and the ability ...

The engine starts easily whether cold or hot and is ready to use immediately. Once the engine is up and running, the Auto Choke automatically returns to an optimal operating position.

The innovative design of Honda’s Mini 4-Stroke engines allows them to be used and stored in any position for full 360° usability. Upright, sideways, even upside down – the Mini 4-Strokes will still run great.

The iGX’s advanced electronic governor eliminates this by electronically controlling the throttle to achieve a higher effective power output.

Using the Fuel Off feature when shutting your pressure washer down helps prevent sticky carburetor buildup which makes for cleaner storage and easier future starting.

STR Governor (Self Tuning Regulator) minimizes engine droop seen with traditional mechanical governor systems by electronically regulating the throttle opening to maintain constant, stable engine speed even under changing load conditions, resulting in exceptional performance and enhanced user satisfaction.

GC-Pure

Built-in passages effectively return the circulated oil to the oil reservoir from every part of the engine.  An oil return port positioned in the center of the reservoir prevents oil from accidentally flowing into the combustion chamber.

The innovative ECU monitors and controls engine functions including Throttle, Choke, Ignition Timing, and Oil Alert.  On some models, it also offers programmable governor and throttle modes for unprecedented flexibility.  A diagnostic LED helps with trouble shooting.  Stepper motors precisely control throttle and choke position.

When you put it all together (with fewer parts) you get an engine with reduced emissions and greater-than-ever durability.

Honda’s All-New GCV pressure washer engines offer an overhead valve (OHV) layout. The OHV design, new V-shaped valves and a pent-roof shape of combustion chamber enable air in cylinder to flow more smoothly increasing combustion efficiency, allowing for higher compression ratios and greater power output.

GCx 9 PWR

Next, VERY CAREFULLY put the screws through the holes and grommets in the mirror and into the plugs in the wall tighten screws ONLY enough to hold the mirror ...

Diffraction involves the bending and spreading of waves around obstacles, while refraction is the change in direction of waves passing from one medium to another.Diffraction is a wave phenomenon that occurs when a wave encounters an obstacle or a slit. It is characterised by the bending of waves around the corners of an obstacle or aperture into the region of geometrical shadow of the obstacle. In other words, diffraction is the spreading out of waves past openings or around corners. This is most noticeable when the size of the obstacle or opening is comparable to the wavelength of the wave. For instance, when light passes through a narrow slit and is viewed on a screen, a series of light and dark bands are observed. This is due to the interference of light waves diffracted by the slit. On the other hand, refraction is the change in direction of a wave passing from one medium to another caused by its change in speed. For example, when light travels from air into water, it slows down, causing it to continue to travel with a different direction or path. This bending of light as it passes from one medium to another is what we call refraction. The amount of bending, or angle of refraction, depends on the speeds of light in the two different media. This can be quantified using Snell's law, which relates the ratio of the angle of incidence and the angle of refraction to the ratio of the velocities of the wave in the two different media.In summary, while both diffraction and refraction involve the bending of waves, they occur under different circumstances. Diffraction occurs when waves encounter obstacles or slits, leading to the spreading out of waves, while refraction occurs when waves pass from one medium to another, leading to a change in direction due to a change in speed.

Drive-By-Wire unlike conventional models, has no throttle cable. An ECU controls a throttle motor via an electrical signal. Ideal throttle control is possible, from conventional type user-operated throttle control, to a variety of automatic control by the ECU.

GreenceptionGC16

Electronic Fuel Injection eliminates the need for a manual choke, making starting simple. In addition, starting is improved as the fuel is sealed within the injector and fuel hose reducing fuel deterioration, and making smooth engine startup possible even after long-term storage.

Jun 6, 2022 — The "Zeiss Pre-Moistened Lens Cleaning Cloths" is the only product I have found to flawlessly clean three of my most difficult lens surfaces ...

Honda’s hemispherical combustion chamber was inspired by our proven racing technology.  It offers the highest V-Twin compression ratio on the market.

Honda’s simple design has made the GC and GS Series lighter and more compact than any engine in their class. Plus, simple construction has minimized the number of parts, making the engine more reliable and easier to operate.

Honda’s GC and GS engines use the world’s first small engine internal timing belt, designed to last the lifetime of the engine.

In addition to the milder operating noise of 4-Stroke engines in general, the Mini 4-Stroke’s belt-driven OHC design further reduces unpleasant mechanical noise.   Its lighter piston and other moving parts help keep vibration to a comfortable level.

The results include better all-around environmental performance and operating costs that actually decrease the more the engine is used!

Greenception GCx 16 Erfahrungen

Buy TE Connectivity FASTIN-FASTON .110 Uninsulated Male Spade Connector, Tab, 2.8 x 0.8mm Tab Size, 0.3mm² to 0.56mm² 160174-2. Browse our latest Spade ...

SAE J1939 CAN Bus (Controller Area Network) communication functionality provides ECU (Electronic Control Unit) connectivity with less wiring. It enables a variety of complicated electronic controls to be linked to improve operability.

GCSignal Controller

Speaking of cooling, improved cooling means better combustion management. Cooling is also improved by each of the lightweight aluminum pushrods being housed in a separate tube to achieve enhanced airflow.

Electronic Fuel Injection (EFI), which detects the state of the engine using sensors supplies the optimum amount of fuel to the engine according to its working conditions. EFI Improves fuel economy, reduces exhaust gas, and achieves excellent usability and easy maintenance.

This system, which is connected to the camshaft, reduces compression by opening the exhaust valve slightly when the engine is being started.  This reduces the amount of force needed to start the engine and improves starting performance.

Control panel mounted LED indicator informs the user about potential problems using 10 different trouble codes. The indicator is designed to stop the engine, or alert the operator of potential issues, helping to protect and extend engine life.

The SAE J1349 standard measures net horsepower with the manufacturer’s production muffler and air cleaner in place. Net horsepower more closely correlates with the power the operator will experience when using a Honda engine powered product. The power rating of the engines indicated in this document measures the net power output at 3600 rpm(7000 rpm for model GXH50, GXV50, GX25 and GX35) and net torque at 2500 rpm, as tested on a production engine. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operation speed of the engine in application, environmental conditions, maintenance and other variables.

Efficient 4-Stroke technology not only offers superior fuel economy, it also requires no mixing of oil in the engine’s fuel supply.  This substantially reduces both oil consumption and the emission of unburned oil in the exhaust.

The OHV layout, with enhanced valve positioning and combustion chamber, the new GCV170 pumps out an increase in torque of 18 percent and a nine percent horsepower gain over the GCV160; GCV200: also showed a strong increase in torque of 13 percent and 10 percent horsepower gain over the GCV190

Receiver Operating Characteristic (ROC) curve. The X axis is false positive rate (FPR), Y axis is true positive rate (TPR). For certain classifier, we can get a ...

Definition: A millimeter (symbol: mm) is a unit of length in the International System of Units (SI). It is defined in terms of the meter, as 1/1000 of a meter, ...

Nov 20, 2015 — The reflected IR covers wavelengths from approximately 0.7 µm to 3.0 µm. The thermal IR region is quite different than the visible and reflected ...

A truly innovative combination of a compact combustion chamber, overhead cam configuration and uniblock construction significantly reduces fuel and oil consumption as compared to conventional side-valve engines.

Mar 1, 2016 — Light is absorbed and promotes electrons between the Fe2+ 3d orbitals (the 3d orbitals are split into different energies by the environment).