Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

For checking the quality of optical flats, one may inspect them in interferometers, ideally using an even better reference surface. In some cases, one uses reference surfaces based on a liquid like mercury, which can be extremely flat but is difficult to handle.

Even optical flares beta from a robust material such as fused silica should be handled with great care in order to avoid any surface damage. For example, one should always store optical flats in a suitable box, in which it is wrapped with a soft material.

With further production steps, such as the application of a dielectric coating, they optical flats also be turned into high-quality optical elements themselves. For example, a Twyman–Green interferometer requires a very flat reference mirror, which can be made from an optical flat.

During interferometric measurements, both the optical flat and the tested surface should be very clean; see the article on cleaning of optics.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.

Artifex Engineering offers precisely flat reference plates for optical testing. Our optical flats are available as single surface and dual surface options. We will gladly customize to your requirements. Additionally we offer standard optical flats in N-BK7 and fused silica. Visit our product page for more information. We look forward to your inquiry.

This is the Scorpion Vision Web shop. We ship globally. Delivery is free for all UK ONLINE orders (subject to a minimum order value of £20).

Optical flats are mainly used as highly flat reference surfaces in interferometers for checking the flatness of optical elements such as optical windows, laser mirrors, prisms, optical filters or laser crystals. For example, one may place an optical flat close to an inspected surface, but slightly tilted against that surface, so that surfaces with ideal quality would result in a regular pattern of straight interference fringes when the assembly is illuminated with monochromatic light. Any deviations from that pattern then indicate deviations from perfect flatness.

Using our advertising package, you can display your logo, further below your product description, and these will been seen by many photonics professionals.

Used as a reference surface, Knight Optical's optical flats are provided in single-or double-sided Zerodur and quartz varieties with λ/10 or λ/20 flatness available. Our stock catalogue includes 26 mm to 302 mm diameter optical flats which are packaged in a protective wooden box. Custom optical flats are also available with differing dimensions and flatness specifications. We also stock monochromatic light units which are used to view the fringe patterns on the surface of the optical flat when testing a surface.

Different degrees of surface quality can be obtained. A typical flatness specification would be λ/10, but even higher qualities are available. Usually, the surface quality should be substantially better than the specifications of the objects to be tested, so that obtained deviations from flatness are largely dominated by the quality of those objects.

If you would like to return or have any questions about your returning your item, please contact returns@scorpion.vision

Note: the article keyword search field and some other of the site's functionality would require Javascript, which however is turned off in your browser.

Optical flats are plates with one or two surfaces of particularly high optical quality and flatness. The degree of flatness is quantified with the distance between two parallel imaginary planes, where one is tangential to the highest point of the surface and the other one to the lowest point. That flatness measure is normally at least λ/10, and sometimes even substantially better – e.g. down to a few nanometers. The surface roughness is also usually very low.

Taxes may apply to your order depending on the shipping destination. Please note that the customer is responsible for any applicable taxes and duties. Goods are shipped with incoterms DAP.

Typically, an optical flat has a cylindrical shape, a diameter of a couple of centimeters, a thickness of a few millimeters, and is made of fused silica or some other clear optical glass. It thus looks like a mirror substrate. However, different types of optical flats are available:

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Note: this box searches only for keywords in the titles of articles, and for acronyms. For full-text searches on the whole website, use our search page.

Removing the unknowns and all the risk by providing expertise and friendly support by qualified and experienced optical and automation machine vision specialists.