LivecameraViewer

The sensor size is determined by both the number of pixels on the sensor, and the size of the pixels. Different sized pixels are used for different applications, with larger pixels used for higher sensitivity, and smaller pixels used for higher spatial resolution (find out more on Pixel Size and Camera Resolution).

SLRcamera

Field of view defines the maximum area of a sample that a camera can image, determined by the focal length of the lens and the sensor size.

Webcamera

There are two processes which can be used to enhance UV sensitivity for wavelengths >200 nm: UV photon conversion, and anti-reflection coatings.

Sensor size is determined by both the size of the pixels and number of pixels on the sensor. This can be optimized for each application, with larger sensors optimal for sensitivity limited applications, and smaller sensors optimal for resolution limited applications.

LiveCamera

The gain relates the number of photoelectrons released to the gray levels displayed, and can be used to enhance contrast for low-light imaging.

View camerahistory

Figure 3 shows a simplified version of how these assumptions allow for AFOV calculation. By using trigonometry, the AFOV can be expressed as:

70 mm COB lens family for high lumen output retail and hospitality applications SAKURA is a 70 mm silicone COB lens developed specifically for the retail and hospitality industries. It delivers medium and wide beams as well as a beautiful 15-degree spot beam with high candela peak. Optimized for 14.5 mm and compatible with up 22 mm LES size COBs, SAKURA can be easily attached to the luminaire using the specifically designed black adaptor ring. SAKURA is designed to operate in environments requiring high heat resistance where high power COBs (>30 W) and fixtures with challenging thermal design are used. For example, window displays that are exposed to direct bright sunlight require high power lighting to maintain focus on the items being displayed. This requires powerful luminaires that generate considerable heat that needs silicone optics to handle the heat generated.

Field of view (FOV) is the maximum area of a sample that a camera can image. It is related to two things, the focal length of the lens and the sensor size. Figure 1 shows a comparison between the field of view and the size of the sensor. Assuming that the focal length of the lens is the same, the larger the sensor the larger the field of view.

There are many subcategories of UV light, each which need different sensor requirements. These include both physical and chemical sensor changes.

Earthcamera

The focal length of a lens converges light so that the image of an object is focused onto the sensor. This determines the angular field of view, a parameter of the overall field of view. This is defined as the angle between any light captured at the horizontal and any light captured at the edge of the of the object. All of these parameters play a role in determining the FOV of a camera and can be measured using either trigonometry and the angular field of view, or via an optical test, in which a black body is utilized to create a virtual image

To measure the FOV of UV, visible and infrared cameras, optical tests are commonly used. During the test, light is focused from a black body (an object that absorbs all light that falls on it) onto a test target at the focal place. By using a set of mirrors, a virtual image can be created that is at an infinitely far distance.

RELATED PRODUCTS:SAKURA REQUEST SAMPLESFP17001_SAKURA-70-S FP17002_SAKURA-70-M FP17003_SAKURA-70-W REQUEST 3D MECHANICAL MODELFP17001_SAKURA-70-S FP17002_SAKURA-70-M FP17003_SAKURA-70-W   RELATED CONTENT:Display window lighting with SAKURA Track light luminaire with SAKURA Introduction to retail lighting Guide – Retail lighting optics

Bellowscamera

Shuttercamera

This means that the distance of the focal length is determined by how strongly the light is converged by the lens in order to focus the subject being imaged. This, in turn, influences the angle from the horizonal of light that can be captured by the lens. This is known as the angular field of view (AFOV) and is required to determine the overall FOV. The AFOV is the angle between any light captured at the horizonal, and any light captured at the edge (as shown in Figure 2). If you have a fixed sensor size, altering the focal length will alter the AFOV and therefore the overall FOV. A shorter focal length provides a larger AFOV view, and therefore a larger FOV. The same is true but vice versa for longer focal lengths, as indicated in Figure 2.

Where D is the full display image dimensions (either horizontal or vertical), and d is the target dimensions (either horizontal or vertical).

The focal length of the lens describes the distance between the lens and the focused image on the sensor. As light passes through the lens it will either converge (positive focal length) or diverge (negative focal length), however within cameras the focal length is predominately positive. Shorter focal lengths converge the light more strongly (i.e. at a sharper angle) to focus the subject being imaged. Longer focal lengths, in comparison, converge the light less strongly (i.e. at a shallower angle) in order to focus the image.

This allows the FOV dimensions (i.e. vertical and horizontal distances) to be measured without knowing lens focal length or sensor size. The image created, including the target, is then displayed on a monitor, with the target image being a subset of the full image display. This allows the FOV to be approximated as:

See how others are using our high-performance cameras, spectrographs and optics-based solutions to advance their research and application.

Acton optics and coatings provide ultra-precision optical components and coatings with an emphasis on the UV/VUV spectral regions.

We place great importance in protecting our intellectual property rights and our products with patents, trademarks, design rights or other intellectual property rights, which we defend through active enforcement.