This parameter expands the profile (line roughness) parameter Rsk three dimensionally; parameter Rsk, is used to evaluate deviations in the height distribution.

This wall accent mirror has a slightly arched silhouette and high-quality glass center that's sure to bounce around natural light throughout your space. Its frame is made from metal and comes in the finish of your choice, so you can make it your own. It measures 36" tall and has a vertical orientation, making it right at home above a bathroom vanity or on that shiplap wall in your master suite.

Note This parameter is suitable for evaluating friction and abrasion. It is also used to evaluate lubricity for engine cylinder surfaces.

Note One of the most widely used parameters is the mean of the average height difference for the average surface. It provides for stable results as the parameter is not significantly influenced by scratches, contamination, and measurement noise.

Silver mirrorchemistry

This is the number of peaks per unit area. Only peaks that exceed a designated size are counted. Unless otherwise specified, the designated size is determined to be 5% of the maximum height Sz.

Silver Mirrornyc

This parameter expands the profile (line roughness) parameter Rv three dimensionally. It is the maximum value for the valley’s depth.

Minimum height discrimination: 10% of the Rz value Minimum length discrimination: 1% of the reference length

Silver mirrorfacial bar reviews

Represents the sum of the mean value for the height of the five tallest peaks and the mean of the depth of the five deepest valleys of a profile within the sampling length.

Minimum height discrimination: 10% of the Rz value Minimum length discrimination: 1% of the reference length

Rmr indicates the material ratio determined by the difference Rδc between the referential section height level C0 and the profile section height level.

Ssk=0: Symmetric against the mean line Ssk>0: Deviation beneath the mean line Ssk<0: Deviation above the mean line

The Str value ranges from 0 to 1; normally Str > 0.5 indicates a strong isotropy while Str < 0.3 is strongly anisotropic.

Terms Of Use | Privacy Notice | Cookies | Cookie Settings | About Us | Imprint | Careers | Careers | Sitemap

Silver Mirrorfacial

This parameter expands the profile (line roughness) parameter Rz three dimensionally. The maximum height Sz is equivalent to the sum of the maximum peak height Sp and maximum valley depth Sv.

Sk  Core height: the difference between the upper and lower levels of the core Spk  Reduced peak height: the mean height of the protruding peaks above the core Svk  Reduced valley height: the mean height of the protruding dales beneath the core Smr1  The areal material ratio segmenting protruding peaks from the core (indicated as a percentage) Smr2  Areal material ratio segmenting protruding valleys from the core (indicated as percentage)

Represents the sum of the maximum peak height Zp and the maximum valley depth Zv of a profile within the reference length.

Note This parameter concerns the height distribution and is suitable for evaluating the abrasion and oil sump of lubricants for slide planes.

This parameter expands the material ratio curve parameters (Rk, Rpk, Rvk, Mr1, and Mr2) of the profile parameter three dimensionally.

Terms Of Use | Privacy Notice | Cookies | Cookie Settings | About Us | Careers | Careers | Sitemap

This parameter expands the profile (line roughness) parameter Rku three dimensionally; Rku, is used to evaluate sharpness in the height distribution.

Rk  Core roughness depth Rpk  Reduced peak height Rvk  Reduced valley depth Mr1, Mr2  Material portion

Not only does the Lucido decorative vanity mirror exude a certain fairytale-like quality, but it also adds a graceful finishing touch to your living space. It's ideal for delicate layouts and makes a nice complement for soft tones, but you can just as easily use it to contrast a more dramatic aesthetic. It's available in a variety of colors to meet your preferences.

Silver mirrorround

Indicates the ratio of the material length Ml(c) of the profile element to the evaluation length for the section height level c (% or μm).

Note This parameter relates to the tip geometry of peaks and valleys and is suited to analyzing the contact between two objects.

Note These parameters are used to evaluate the horizontal size and complexity of parallel grooves and grains instead of the height parameters.

The average value of the heights of the five peaks with the largest global peak height added to the average value of the heights of the five pits with the largest global pit height.

This is a very attractive mirror with a Moroccan feel to it. The color is a bright gold leaf which is exactly what we wanted. It arrived within three days. The mirror was purchased for a remodel in our second home in Asheville. I opened it upon arrival to make sure the glass was intact, which it was. It did not occur to me that the attached mounting bracket would be wider than the mirror! Yesterday the contractor mounted the mirror only to find that the bracket was too wide! Because we are beyond the 30-day return period, we are stuck with a defective mirror. You should consider this when you decide to purchase the mirror!. Kathryn. PIEDMONT, CA. 2024-10-31 14:30:21

Note Rzjis is equivalent to the parameter Rz of the obsolete JIS standard B0601:1994. Although ten-point mean roughness was deleted from current ISO standards, it was popularly used in Japan and was retained within the JIS standard as the parameter Rzjis.

Rku=3: Normal distribution Rku>3: The height distribution is sharp Rku<3: The height distribution is even

This parameter is defined as the ratio of the horizontal distance of the autocorrelation function that has the fastest decay to a specified value s to the horizontal distance of the autocorrelation function that has the slowest decay to s (0 ≤ s < 1) and indicates the isotropic/anisotropic strength of the surface.

Pmr  The relative material length rate of the primary profile Wmr  The relative material length rate of the waviness profile

Note This is one of the most widely used parameters and is also referred to as the RMS value. The parameter Rq ７corresponds to the standard deviation of the height distribution. The parameter provides for easy statistical handling and enables stable results as the parameter is not significantly influenced by scratches, contamination, and measurement noise.

This signifies the rate of an increase in the surface area. The increase rate is calculated from the surface area A1 derived by the projected area A0.

Pmr (c)  The material length rate of the primary profile (formerly tp) Wmr (c)  The material length rate of the waviness

Represents the sum of the maximum peak height Zp and the maximum valley depth Zv of a profile within the evaluation length, not sampling length.

Bare walls giving you the blues? This wall mirror is the perfect cure! Its understated silhouette suits ensembles from traditional to coastal, while the smooth face provides you with a place to quickly check your look. Crafted from wood, the frame is awash in a silver finish that lends this essential design a pop of glamorous appeal. Plus, hanging hardware is included, so you can install this artful accent right away.

Spc indicates the mean principle curvature (average sharpness) of the peaks. Only peaks that exceed a designated curvature are taken into consideration.

This accent mirror is one sure way to bounce some natural light around your bedroom while giving you a place to grab a glimpse of your reflection as you get ready. It's crafted from high-quality glass and has a generously sized crown-shaped silhouette that gives it all the character of a well-loved antique. A solid finish outfits the metal frame to help draw eyes to this design, while its included wall-mounting hardware saves you a trip to the store. We love how its generous 37"-tall size allows it to make just as much of an impact on a bare wall as it does when hung next to a row of colorful painting prints. Plus, it comes in a variety of finishes, so you can choose which one works best for your home.

Note This is one of the most widely used parameters and is also referred to as the RMS value. The parameter Rq corresponds to the standard deviation of the height distribution. The parameter generates good statistics and enables stable results since the parameter is not significantly influenced by scratches, contamination, and measurement noise.

The horizontal distance of the autocorrelation function that has the fastest decay to a specified value s (0≤ s < 1). Unless otherwise specified, the parameter is specified as = 0.2.

Note This parameter concerns height distribution. It is suitable for evaluating the abrasion and oil sump of lubricants for slide planes.

Silver Mirrorpromo code

It was just what I expected from a great company like yours. Looks perfect above our black vanity with the satin brass faucet. Edward. NAPLES, FL. 2024-01-02 07:34:03

Sku=3: Normal distribution Sku>3: Height distribution is sharp Sku<3: Height distribution is even

The Amyr decorative vanity mirror's rounded edges neatly contrast straight-edged walls, making it an eye-catching addition to your space. The rounded silhouette provides the perfect blend of beauty and durability.

Reflect the beauty of your home in this arched metal mirror! This versatile accent piece makes a traditional statement in any space whether you choose to hang it over the fireplace in your living room or above a console table in your entryway. We love that it's sturdy and sizable. Plus, it's available in three classic finishes to suit your style. Metal D rings are included (which makes hanging it easy) so you can elevate your space in no time at all!

Note This parameter relates to the tip geometry of peaks and valleys and is suitable for analyzing the degree of contact between two objects.

Rsk=0: Symmetric against the mean line (normal distribution) Rsk>0: Deviation beneath the mean line Rsk<0: Deviation above the mean line

Silver mirrorantique

Note These parameters are suited to evaluating the slippage of lubrication mechanisms and contact surfaces, such as gaskets.

This parameter expands the profile (line roughness) parameter Rp three dimensionally. It is the maximum value for peak height.

Simplistic and beautiful, the Ulric decorative vanity mirror features a scalloped rectangular shape. A handmade product, its iron frame displays distressed markings and crafty details that add a unique flair. While meant for a bathroom, this glamorous piece of decor looks great above a fireplace, in an entryway, or over a sofa.

Note This function is used to evaluate friction and abrasion. It is also used to evaluate the lubricity of engine cylinder surfaces.

Note Although frequently used, max height is significantly influenced by scratches, contamination, and measurement noise due to its reliance on peak values.

Note Std represents the angle for the strongest orientation, although the second and third strongest angles can also be defined on the directional chart.

Rk, Mr1, and Mr2 values are calculated from the linear curve (equivalent linear curve) minimizing the sectional inclination corresponding to 40% of the material ratio curve. Draw a triangle with the area equivalent to the protrusion of the material ratio curve segmented by the breadth of the parameter Rk and calculate parameters Rpk and Rvk.

More beautiful in person. The trim is metal with a antiqued gold accent. Sturdy and tall and narrow, perfect for tall ceilings in small spaces. I placed it in our powder room under a chandelier and its gorgeous.. Cynthia. Santa Clarita, CA. 2024-10-28 12:51:33

Note Rt is a stricter standard than Rz in that the measurement is conducted against the evaluation length. It should be noted that the parameter is significantly influenced by scratches, contamination, and measurement noise due to its utilization of peak values.

Motif parameters are used for the evaluation of surface contact status based on the enveloped features of the sample surface.

Silver Mirrormembership

Beautiful mirror heavy completely worth the money. Way nicer than the price. . Anonymous. Anonymous. 2024-03-18 16:25:51

This parameter expands the profile (line roughness) parameter Rdq three dimensionally. It indicates the mean magnitude of the local gradient (slope) of the surface. The surface is more steeply inclined as the value of the parameter Sdq becomes larger.

The material volume and void volume are calculated from a material ratio curve as indicated in the diagram. The position that corresponds to a material ratio of 10% and 80% is regarded as the threshold segmenting the peak, core, and dale.

Pt  The maximum total height of the profile (Rmax in the case of JIS’82) Wt  The maximum total height of the waviness

AR  Mean spacing of roughness motifs: the arithmetic mean of roughness motifs ARi calculated from the evaluation length R  Mean depth of roughness motifs: the arithmetic mean of the roughness motif depth Hj calculated from the evaluation length Rx  Maximum depth of roughness motifs: the maximum value of the Hj calculated from the evaluation length AW  Mean spacing of waviness motifs: the arithmetic mean of the waviness motif AWi calculated from the evaluation length W  Mean depth of waviness motifs: the arithmetic mean of the waviness motif depth HWj calculated from the evaluation length Wx  Maximum depth of waviness motifs: the maximum value of the HWj calculated from the evaluation length

The difference in height between the p and q material ratio. Unless specified otherwise, the values p=2.5%, q=50% shall be applied.

This parameter indicates the direction angle of the texture (parallel groove orientation, etc.). It is derived from the angle maximizing the angle spectrum of two-dimensional Fourier transformation images.

Material ratio curves signify the ratio of materiality derived as a mathematical function of parameter c, where c represents the height of severance for a specific sample. This is also referred to as the bearing curve (BAC) or Abbott curve. Probability density curves signify the probability of occurrence for height Zx. The parameter is equivalent to the height distribution histogram.

Pdc  The section height level difference for the primary profile Wdc   The section height level difference for the waviness profile

Gorgeous and high quality mirror! Took our powder room to the next level and we love it!. Jenna. TX. 2023-07-31 09:17:53

Note This parameter is used to evaluate the horizontal size of parallel grooves and grains instead of the height parameters.

Note Although frequently used, this parameter is significantly influenced by scratches, contamination, and measurement noise due to its utilization of peak values.

Note This is one of the most widely used parameters and is the mean of the average height difference for the average plane. It provides stable results since the parameter is not significantly influenced by scratches, contamination, and measurement noise.